- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LDPE
- Low Density Polyethylene (LDPE), Molded
- Lotte Chemical Titan TITANLENE® LDI300YY Low density polyethylene resin
Lotte Chemical Titan TITANLENE® LDI300YY Low density polyethylene resin
| Category | Polymer , Thermoplastic , Polyethylene (PE) , LDPE , Low Density Polyethylene (LDPE), Molded |
| Manufacturer | Lotte Chemical Titan Holding Sdn. Bhd. (Former Titan Chemicals) |
| Trade Name | TITANLENE® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Lotte Chemical Titan TITANLENE® LDI300YY Low density polyethylene resin.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
LDI300YY is a low density polyethylene resin for injection molding and is a barefoot grade. LDI300YY meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 2.1 & (c) 2.2.Applications: Medium sized moldings Cosmetic containers Bottle closures Food containersAdditives: BarefootAdvantages: High stiffness Good toughness Excellent glossInformation provided by Titan Chemicals
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Base Resin Density | 0.920 g/cc | 0.0332 lb/in³ | ASTM D1505 |
| Base Resin Melt Index | 20 g/10 min | 20 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 9.81 MPa | 1420 psi | ASTM D638 |
| Tensile Strength, Yield | 11.8 MPa | 1710 psi | ASTM D638 |
| Elongation at Break | 120 % | 120 % | ASTM D638 |
| 1% Secant Modulus | 186.32 MPa | 27024 psi | ASTM D638 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 87.0 °C | 189 °F | resin; ASTM D1525 |
| Brittleness Temperature | -35.0 °C | -31.0 °F | ASTM D746 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 160 - 240 °C | 320 - 464 °F | |
| Mold Temperature | 15.0 - 50.0 °C | 59.0 - 122 °F |
Users viewing this material also viewed the following:
- Polykemi AB POLYblend 65V PC/ABS-Blend, Flame Retardant
- SABIC Innovative Plastics LNP LUBRICOMP DFL32 PC (Europe-Africa-Middle East)
- Momentive Performance Materials FSE7340 Heat Cured Fluorosilicone Rubber
- Multibase C6-150 Dow-Corning Class VI Elastomer
- Lubrizol Pellethane® 2363-55D Thermoplastic Polyurethane Elastomer
- A. Schulman POLYBATCH™ Blue LL40348/4 Concentrate Based In LLDPE
- Unitika elitel UE3216 Polyester, Pellet
- ExxonMobil LDPE LD 150BW Wire & Cable Low Density Polyethylene Resin
- Polyplastic Armlen® PP MF 40-2HS Polypropylene, 40% Mineral Filled
Copyright © lookpolymers.com All Rights Reserved