Styrolution TerblendÂ® N NM-13 ABS+PA (Conditioned)

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS)/Nylon Blend , Nylon
Manufacturer	Styrolution
Trade Name	Terblend®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution TerblendÂ® N NM-13 ABS+PA (Conditioned).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Description: TerblendÂ® N NM-13 is ABS/PA blend combining excellent impact strength at low temperatures with easy processability and good surface appearance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS

Physical Properties	Metric	English	Comments
Density	1.07 g/cc	0.0387 lb/inÂ³	ISO 1183
Moisture Absorption at Equilibrium	1.1 %	1.1 %	23Â°C/50% RH; ISO 62
Linear Mold Shrinkage, Flow	0.0070 cm/cm	0.0070 in/in	ISO 2577
Melt Flow	26.75 g/10 min @Load 10.0 kg, Temperature 240 Â°C	26.75 g/10 min @Load 22.0 lb, Temperature 464 Â°F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	94	94	ISO 2039-2

Thermal Properties	Metric	English	Comments
Vicat Softening Point	91.0 Â°C	196 Â°F	VST/B/50; ISO 306
	165 Â°C	329 Â°F	VST/A/50; ISO 306

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+11 ohm-cm	1.00e+11 ohm-cm	IEC 60093
Dielectric Constant	3.3 @Frequency 1.00e+6 Hz	3.3 @Frequency 1.00e+6 Hz	IEC 60250
Dissipation Factor	0.055 @Frequency 1.00e+6 Hz	0.055 @Frequency 1.00e+6 Hz	IEC 60250

Processing Properties	Metric	English	Comments
Melt Temperature	240 - 270 Â°C	464 - 518 Â°F	Injection Molding
Mold Temperature	40.0 - 80.0 Â°C	104 - 176 Â°F	Injection Molding

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	Europe
Primary Processing Technique	Injection Molding and Extrusion

Users viewing this material also viewed the following: