Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.916 - 0.920 g/cc | 0.0331 - 0.0332 lb/in³ | Base Resin; ASTM D1505 |
NIZHNEKAMSKNEFTEKHIM PE 5118N (18601) Linear Low Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D4883 |
Chevron Phillips Vytek™ V205C6 Enhanced LLDPE Blown Film Resin
(discontinued **) Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: excellent dart impact, hot-tack and heat seal properties, good drawdown, can be use.. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D4883 |
Chevron Phillips Dynex™ D604D6 Enhanced LLDPE Blown Film Resin
(discontinued **) Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: superior dart impact, optical, hot-tack and heat seal properties, good drawdown, ca.. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D1505-60T |
Chevron Phillips MarFlex® 1010 LDPE Extrusion Coating Resin
(discontinued **) Resin Type: High Speed ResinCharacteristics: Excellent Processability, High Temperature Extrusion Stability, Good Draw Down ResinApplications: Food Packaging, LaminationsData provided by Chevron Che.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Global ST-1018 Low Density Polyethylene, Injection Molding Grade
(discontinued **) Description-transparency, high toughness, flexibility, high impact strength, good chemical resistanceApplications-packagingMeets FDA requirements as listed in food additives regulation 21 CFR 117.15.. |
|||
Density | 0.916 - 0.920 g/cc | 0.0331 - 0.0332 lb/in³ | Base Resin; ASTM D1505 |
NIZHNEKAMSKNEFTEKHIM PE 4318Q (18403) Linear Low Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Huntsman PE5020 Extrusion Coating Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: High draw down, low neck-in, excellent heat sealability, and excellent adhesion.Applications: Extrusion: coating grade and thin coatings.FDA Notes: Conforms t.. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Huntsman PE5050 Extrusion Coating Polyethylene
(discontinued **) Homopolymer, Drug Master File listed product, and FDA compliant.Features: High draw down, low neck-in, excellent heat sealability, and excellent adhesion.Applications: Extrusion: coating grade and t.. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D1505 |
M. Holland Company LD300 LDPE
(discontinued **) Features: High ESCR (Stress Crack Resist.), Good Processability, Low Temp. StrengthUses: Closures, Electrical Parts, Household GoodsApprovals: FDA 21 CFR 177.1520(c) 2.2Processing Method: Injection .. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D792 |
LyondellBasell Montell 16502F3 Butene LLDPE Key Features: butene LLDPE resins for film extrusion applications, easy processing, low gels, good strength, no slip, no antiblockApplications: can liners and trash bags, blends, thin filmsMeets FDA.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D792 |
LyondellBasell Montell 16502F8 Butene LLDPE Key Features: butene LLDPE resins for film extrusion applications, easy processing, low gels, good strength, medium slip, high antiblockApplications: can liners and trash bags, blends, thin filmsMee.. |
|||
Density | 0.917 - 0.925 g/cc | 0.0331 - 0.0334 lb/in³ | |
Kazanorgsintez 108-279 Low Density Polyethylene Composition with Improved Processibility Production Method: Compositions are produced from low density polyethylene with additives. Application: Intended for cable core lapping.Information Provided by Kazanorgsintez |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Westlake Hifor Xtreme SC74838 Linear Low Density Polyethylene WESTLAKE HIFOR Xtreme SC74838 polymer is a high strength linear low density polyethylene designed for blown film extrusion that contains medium slip and medium antiblock. Films produced with this re.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Westlake Mxsite LC78104 Polyethylene Mxsite LC78104 polyethylene is recommended for the skin layers of cast stretch film. It will provide a very aggressive cling force in both a stretched and unstretched condition. The excellent cling .. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D1505-60T |
Chevron Phillips 1018 Extrusion Coating Resin Resin Type: High Speed ResinCharacteristics: Excellent Processability, High Temperature Stability, Good Draw Down ResinApplications:Food Packaging, Laminations, Sealant ResinData provided by Chevron.. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D1505-60T |
Chevron Phillips MarFlex® 1023 LDPE Extrusion Coating Resin Resin Type: Base, SpeedCharacteristics: Good adhesion at low coating weights and high line speedsLow COF usesFDA approved for food contactApplications: Can be used in the outer coextrusion layer or .. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Chevron Phillips MarFlex® D143FK Metallocene Linear Low Density Polyethylene, Blown Film This mLLDPE is tailored for applications that require:Excellent clarityExcellent glossExcellent toughnessExcellent heat sealTypical blown film applications include:Seal layer in coextrusionsHeavy du.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | Melt |
Covestro Desmopan® W DP 89051D Polyurethane PreprocessingMax. Water content |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ExxonMobil method |
ExxonMobil LLDPE LL 3001.32 Cast Linear Low Density Polyethylene Resin Product Description: LL 3001.32 is a hexane copolymer LLDPE designed for the blown or cast film process. Films made from LL 3001.32 have outstanding tensile and toughness properties. The superior st.. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D1505 |
ExxonMobil NTX™ NTX 104 Super Strength Film Resin NTX super strength hexene blown film resins are designed for applications requiring exceptional strength for maximum downgauging potential. Key property improvements are significantly superior impac.. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D1505 |
ExxonMobil NTX™ NTX 150 Super Strength Film Resin NTX super strength hexene blown film resins are designed for applications requiring exceptional strength for maximum downgauging potential. Key property improvements are significantly superior impac.. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | |
Dow DOWLEX™ 2047A Linear Low Density Polyethylene, Cast Film Grade DOWLEX® 2047A Polyethylene resin is a cast film polymer for high performance stretch cling applications. It provides outstanding tear strength, impact strength and toughness. It complies with U.S. .. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D792 |
Dow DOWLEX™ 2247G Polyethylene Resin Next Generation DOWLEX™ 2247G Polyethylene Resin with Extra Stretch Performance (ESP) is an ethylene-octene-1 copolymer designated for cast stretch film applications, such as industrial pallet wrap.. |
|||
Density | 0.916 g/cc | 0.0331 lb/in³ | |
Dow LDPE 4012 Low Density Polyethylene, Extrusion Coating Grade DOW Polyethylene 4012 extrusion coating resin is used for thin coatings in applications such as sugar pouches, ice cream bar covers, easy tear packages, and freezer papers. It is designed to be run .. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM-D792 |
Braskem Flexus® 9211 LLDPE Blow Film Extrusion Polyethylene Copolymer Braskem Flexus 9211 is a LLDPE hexene copolymer produced through a metallocene catalyst, which presents excellent impact and puncture strength beyond a differential sealing performance compared with.. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ISO 1183-A |
Carmel Olefins IPETHENE® 670 Low Density Polyethylene IPETHENE® 670 is a low density polyethylene extrusion coating and lamination grade. This grade can be processed at high coating temperatures and coating speeds. It exhibits low neck-in and stable w.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ISO 1183-A |
Carmel Olefins IPETHENE® 900 Low Density Polyethylene IPETHENE® 900 is a low density polyethylene injection molding grade. This grade is a good carrier for masterbatches production. It exhibits high melt flow rate, good transparency, and flexibility. .. |
|||
Density | 0.916 g/cc @Temperature 23.0 °C |
0.0331 lb/in³ @Temperature 73.4 °F |
ISO 1183 |
Arkema Group OREVAC® 18365 Maleic Anhydride Modified Polyethylene OREVAC® 18365 is anhydride modified polyethylene. It is available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. OREVAC® 1.. |
|||
Density | 0.917 g/cc | 0.0331 lb/in³ | ASTM D1505 |
M. Holland Company LL217AA LLDPE
(discontinued **) Features: High Clarity, Copolymer, Good ProcessabilityUses: Film, Cast FilmApprovals: FDA 21 CFR 177.1521Processing Method: Blown Film and Cast FilmInformation provided by M. Holland. |
|||
Density | 0.917 - 0.919 g/cc | 0.0331 - 0.0332 lb/in³ | |
Kazanorgsintez 11503-070 High Pressure Polyethylene Production Method: HDPE is produced by high pressure ethylene polymerization in tubular reactors. Application: Intended for production of bags, pipes, fittings, articles designed for food contac.. |