Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Formosa Plastics Formolene® FORMAX® L91507A Film (Hexene Grade) LLDPE
(discontinued **) Superior Performance Linear Low Density Polyethylene for Film Extrusion Formolene FORMAX® L9 is a superior strength linear low density hexene copolymer polyethylene made using a gas-phase process. .. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Formosa Plastics Formolene® FORMAX® L91507E2 Film (Hexene Grade) LLDPE
(discontinued **) Superior Performance Linear Low Density Polyethylene for Film Extrusion Formolene FORMAX® L9 is a superior strength linear low density hexene copolymer polyethylene made using a gas-phase process. .. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Formosa Plastics Formolene® FORMAX® L91507H Film (Hexene Grade) LLDPE
(discontinued **) Superior Performance Linear Low Density Polyethylene for Film Extrusion Formolene FORMAX® L9 is a superior strength linear low density hexene copolymer polyethylene made using a gas-phase process. .. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D4883 |
Eastman E6838-850P Polyethylene
(discontinued **) E6838-850P is a low density resin designed for applications where high coating speeds and good drawdown are required. The combination of high melt index and low density also provides good heat seal.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ISO 1183-A |
Carmel Olefins IPETHENE® 800 Low Density Polyethylene
(discontinued **) IPETHENE® 800 is a low density polyethylene injection molding grade. This grade is a good carrier for masterbatches production. It exhibits high flow and flexibility. APPLICATIONS IPETHENE® 800 i.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
LyondellBasell Montell 0300 Polybutene Key Features: highly isotactic, semi-crystalline homopolymer, good creep resistance, good environmental crack resistance, miscible with polypropylenesApplications: packaging industry, minor additive.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
LyondellBasell Montell 0800 Polybutene Key Features: highly isotactic, semi-crystalline homopolymer, good creep resistance, good environmental crack resistance, miscible with polypropylenes, FDA acceptableApplications: concrete carrierMe.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
LyondellBasell Microthene® G MN71020 Low Density Polyethylene General DescriptionMicrothene G polyolefin powders are ground, irregularly-shaped particles designed for use in a broad range of specialty applications. Microthene G powders combine the unique prop.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
LyondellBasell Microthene® G MN71120 Low Density Polyethylene (Rotomolding) General DescriptionMicrothene G polyolefin powders are ground, irregularly-shaped particles designed for use in a broad range of specialty applications. Microthene G powders combine the unique prop.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
ICO Polymers ICOFLOâ„¢ 510-5021 400 Micron LDPE Powder Description: ICOFLO 510-5021 is a premium polyethylene powder specifically designed to be used in the preparation of masterbatch (concentrate). By utilizing a free flowing powder as a carrier in ma.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
ICO Polymers ICOFLOâ„¢ 510-5059 500 Micron LDPE Powder Description: ICOFLO 510-5059 is a premium polyethylene powder specifically designed to be used in the preparation of masterbatch (concentrate). By utilizing a free flowing powder as a carrier in ma.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
ICO Polymers ICOFLOâ„¢ 510-5060 800 Micron LDPE Powder Description: ICOFLO 510-5060 is a premium polyethylene powder specifically designed to be used in the preparation of masterbatch (concentrate). By utilizing a free flowing powder as a barrier in ma.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
ICO Polymers ICOFLOâ„¢ 510-5061 1200 Micron LDPE Powder Description: ICOFLO 510-5061 is a premium polyethylene powder specifically designed to be used in the preparation of masterbatch (concentrate). By utilizing a free flowing powder as a carrier in ma.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ISO 1183 |
Borealis CA9150 Low Density Polyethylene CA9150 is a low-density polyethylene for extrusion coating. CA9150 contains no additives. Applications: coating and lamination of aluminum foil, coating of various plastic films and cellophane, and.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D792 |
DuPont Bynel® 4206 Anhydride-Modified LDPE Adhesive Resin Bynel® Series 4200 resins are anhydride-modified, low-density polyethylene resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process .. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D792 |
DuPont Bynel® 4288 Anhydride-Modified LDPE Adhesive Resin Bynel® Series 4200 resins are anhydride-modified, low-density polyethylene resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process .. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ISO 1183 |
Tisan TISETILEN® UNR Polyethylene TISETILEN has a wide area of application in construction, building auxiliary materials, lighting equipment, household appliance, toy industries, etc. General specifications include Low densityFlexib.. |
|||
Density | 0.915 g/cc @Temperature 15.6 °C |
0.0331 lb/in³ @Temperature 60.1 °F |
ASTM D4052 |
ExxonMobil Exterex™ A51 Synthetic Fluid Product Description: Esterex™ Adipate Esters are API category Group V fluids. These esters have excellent low-temperature properties, high viscosity indices, good lubricating properties and low vol.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ISO 1183 |
ExxonMobil Exxtral™ CNU 012 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin designed for injection molded automotive applications. Availability: Africa & Middle East, Asia Pacific, Europe, South America and Nor.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ISO 1183 |
ExxonMobil Exxtral™ CNU 013 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin with good UV resistance designed for automotive exterior applications. Availability: Africa & Middle East, Asia Pacific, Europe, South.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ExxonMobil Method |
ExxonMobil LD 200.48 Extrusion Coating and Laminating Resin Product Description: LD 200.48 is a general purpose LDPE extrusion coating grade, designed for flexible packaging applications. It offers – Low neck-in – Very good adhesion – Excellent heat seala.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ExxonMobil Method |
ExxonMobil LD 202.48 Extrusion Coating Resin Product Description: LD 202.48 is an LDPE coating grade, especially designed for high speed, lightweight extrusion coating applications providing: -high speed processability – good heat sealing pro.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ExxonMobil method |
ExxonMobil LDPE LD 200.48 Low Density Polyethylene Resin Product Description: LD 200.48 is a general purpose LDPE extrusion coating grade, designed for flexible packaging applications. It offers – Low neck-in – Very good adhesion – Excellent heat seala.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ExxonMobil method |
ExxonMobil LDPE LD 202.48 Low Density Polyethylene Resin Product Description: LD 202.48 is an LDPE coating grade, especially designed for high speed, lightweight extrusion coating applications providing: -high speed processability – good heat sealing pro.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D792 |
Dow ELITE™ 5220G Enhanced Polyethylene Resin High impact and puncture resistance Excellent on-pallet load elongation for higher yields on regular loads Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a Information provided by Dow |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D1505 |
Braskem PB 608 LDPE Injection Molding Polyethylene Description: PB608 is a grade produced under high pressure in an autoclave reactor. This grade is especially designed for injection molding of articles that must show excellent flexibility propertie.. |
|||
Density | 0.915 - 0.939 g/cc | 0.0331 - 0.0339 lb/in³ | Average value: 0.920 g/cc Grade Count:72 |
Overview of materials for Low Density Polyethylene (LDPE), Extrusion Grade This property data is a summary of similar materials in the MatWeb database for the category "Low Density Polyethylene (LDPE), Extrusion Grade". Each property range of values reported is minimum and.. |
|||
Density | 0.915 - 0.919 g/cc | 0.0331 - 0.0332 lb/in³ | ASTM D1505 |
Petroquimica Triunfo Trithene® JX 7300 LDPE - Injection Molding The Trithene® JX 7300 resin is a low-density polyethylene (LDPE) with outstanding flow ability and flexibility. Those attributes are especially important to meet the requirements for fast injection.. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ExxonMobil method |
ExxonMobil Exceed™ 1015HA Metallocene Polyethylene Resin Product Description: Exceed 1015 mVLDPE resin is metallocene ethylene-hexene copolymer. Films made from Exceed 1015 mVLDPE have outstanding cold temperature toughness, impact strength and puncture. .. |
|||
Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM D792 |
DuPont Bynel® 4107 Anhydride-Modified LLDPE Adhesive Resin
(discontinued **) Bynel® Series 4100 resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All 4100 Series resins are available in pellet form for use in conventional extrusion and coextrusi.. |