Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Modulus of Elasticity | 1.20 GPa | 174 ksi | ISO 178 |
Premix Thermoplastics PRE-ELEC® ESD 6300 Static Dissipative Thermoplastic Compound PRE-ELEC® ESD 6300 is a static dissipative thermoplastic compound based on high impact polystyrene. The dissipative property is permanent and built into the polymer chain. PRE-ELEC® ESD6300 has be.. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | 4 mm thick;10.0 mm wide molded rod; ISO 178 |
Premix Thermoplastics PRE-ELEC® PE 1291 PRE-ELEC PE 1291 is a conductive thermoplastic compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC PE 129.. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | ISO 178 |
Premix Thermoplastics PRE-ELEC® PP 1370 PRE-ELEC PP 1370 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELE.. |
|||
Modulus of Elasticity | 1.20 - 1.60 GPa | 174 - 232 ksi | ASTM D638-04 |
Proto3000 Objet Digital Materials™ DM_4310 Polypropylene-like Prototyping Polymer Primary material: DurusWhiteSecondary material: VeroWhitePlus, VeroBlue, VeroBlack or FullCure720Digital Materials are made up of two Objet materials. The two materials are combined in specific conc.. |
|||
Modulus of Elasticity | 1.20 - 1.60 GPa | 174 - 232 ksi | ASTM D638-04 |
Proto3000 Objet Digital Materials™ DM_4410 Polypropylene-like Prototyping Polymer Primary material: DurusWhiteSecondary material: VeroWhitePlus, VeroBlue, VeroBlack or FullCure720Digital Materials are made up of two Objet materials. The two materials are combined in specific conc.. |
|||
Modulus of Elasticity | 1.20 - 1.60 GPa | 174 - 232 ksi | ASTM D638-04 |
Proto3000 Objet Digital Materials™ DM_4710 Polypropylene-like Prototyping Polymer Primary material: DurusWhiteSecondary material: VeroWhitePlus, VeroBlue, VeroBlack or FullCure720Digital Materials are made up of two Objet materials. The two materials are combined in specific conc.. |
|||
Modulus of Elasticity | 1.20 - 1.96 GPa | 174 - 284 ksi | Average value: 1.67 GPa Grade Count:19 |
Overview of materials for ECTFE Fluoropolymer This property data is a summary of similar materials in the MatWeb database for the category "ECTFE Fluoropolymer". Each property range of values reported is minimum and maximum values of appropriat.. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | ISO 527 |
Chevron Phillips Xtel® XE3200NA Polyphenylene Sulfide Alloy
(discontinued **) Xtel® XE3200NA is an un-reinforced high performance, PPS based alloy developed to provide exceptionally high ductility and impact resistance along with good thermal stability.Information provided b.. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | ISO 527 |
GEHR Plastics PP Polypropylene Polypropylene shows a high mechanical strength and a tensile strength, but a low notched impact strength. PP resists stress cracking and it is easy to weld. At minus temperatures it can get brittle... |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | 0°C; ASTM D638 |
Micropol Isoplas P501 Crosslinkable Polyethylene Information provided by Micropol Limited |
|||
Modulus of Elasticity | >= 1.20 GPa | >= 174 ksi | Bending |
Sibur 21020-PM1 Polypropylene with Low Haze For production of three-layer PE/PP film, for production of sheets for cups and thin casting. It is allowed for contact with food products. |
|||
Modulus of Elasticity | >= 1.20 GPa | >= 174 ksi | Bending |
Sibur 21030-PM1 Polypropylene with Low Haze For production of three-layer PE/PP film, for production of sheets for cups and thin casting. It is allowed for contact with food products. |
|||
Modulus of Elasticity | >= 1.20 GPa | >= 174 ksi | Bending |
Sibur 21060-PM1 Polypropylene with Low Haze For production of three-layer PE/PP film, for production of sheets for cups and thin casting. It is allowed for contact with food products. |
|||
Modulus of Elasticity | >= 1.20 GPa | >= 174 ksi | Bending |
Sibur 21080-PM1 Polypropylene with Low Haze For production of three-layer PE/PP film, for production of sheets for cups and thin casting. It is allowed for contact with food products. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | MD; ExxonMobil Method |
ExxonMobil Label-Lyte™ 38DL247 OPP Film Product Description: A super white opaque, high gloss, high yield and highly cavitated BOPP film designed for use in reel-fed wrap-around labeling applications where superior graphics are desired.Av.. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | MD; ExxonMobil Method |
ExxonMobil Oppalyte™ 38DO447 OPP Film Product Description: A super white opaque BOPP film. The Diamex technology allows for super low density and very high yield. Diamex makes it possible to lower the density, without decreasing the mod.. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | ISO 178 |
Addiplast Addilene H 560 Polypropylene Homopolymer High heat resistance, detergent stabilized, anti-yellowingInformation provided by Addiplast. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | Conditioned; ISO 178 |
Addiplast Addilene PMD 50218 Flame Retardant Polypropylene Flame retardant, unreinforced, with halogensInformation provided by Addiplast. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | Conditioned; ISO 178 |
Addiplast Addinyl A2 Nylon 66 Unreinforced, medium viscosityInformation provided by Addiplast. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | ISO 527-2 |
BASF Ultraform® N2650 Z6 (LEV) POM Description: Is a POM + PUR, elastomer-modified injection-molding grade for applications requiring the highest impact strength together with low stiffness.Information provided by BASF |
|||
Modulus of Elasticity | 1.20 - 2.30 GPa @Temperature 60.0 - 90.0 °C |
174 - 334 ksi @Temperature 140 - 194 °F |
Average value: 1.67 GPa Grade Count:3 |
Overview of materials for Acetal Copolymer, Glass Bead Filled This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, Glass Bead Filled". Each property range of values reported is minimum and maximum valu.. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | ISO 527-1/-2 |
BASF Ultramid® B3S BK00464 PA6 (Conditioned) Description: Easy flowing, finely crystalline injection-molding grade for very fast processing. Uses include thin-walled technical parts (eg. housings, fittings, grips, small parts and fixing clamps.. |
|||
Modulus of Elasticity | 1.20 GPa | 174 ksi | ISO 527 |
BASF Ultramid® B3S HP PA6 (Conditioned) Ultramid B3S HP is a easy flowing, finely crystalline, injection molding PA6 for fast processing |
|||
Modulus of Elasticity | 1.20 - 9.50 GPa | 174 - 1380 ksi | Average value: 3.85 GPa Grade Count:28 |
Overview of materials for Nylon 6, MoS2 Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, MoS2 Filled". Each property range of values reported is minimum and maximum values of appropria.. |
|||
Modulus of Elasticity | 1.20 - 2.50 GPa @Temperature 60.0 - 90.0 °C |
174 - 363 ksi @Temperature 140 - 194 °F |
Average value: 1.85 GPa Grade Count:1 |
Overview of materials for Polypropylene with 40% Mica Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 40% Mica Filler". Specific grades with primary filler content between 35% and 44% are.. |
|||
Modulus of Elasticity | 1.20 - 3.03 GPa | 174 - 440 ksi | Average value: 1.96 GPa Grade Count:18 |
Overview of materials for Polypropylene with 30% Calcium Carbonate (CaCO3) Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 30% Calcium Carbonate (CaCO3) Filler". Each property range of values reported is mini.. |