Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
Nylene® NX4301 Nylon 6, Extrusion Grade Dry as molded. Extrusion grade. Nylene NX4301 is a high viscosity, UV stabilized extrusion grade nylon resistant to degradation by ultraviolet light. The elevated quality of UV resistance is attri.. |
|||
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
NCMT NanoPAC™ HS402 High Performance Polypropylene Nanocomposite Applications: Electrical AppliancesInformation provided by Nano Composite Materials Technology Limited |
|||
Izod Impact, Notched | 0.500 J/cm @Temperature 23.0 °C |
0.937 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
Ovation Polymers Nemcon™ E-CPC/X1 Polycarbonate Alloy PC Alloy-ESD Range Electrical Conductivity with High HDT and improved processability.Information provided by Ovation Polymers |
|||
Izod Impact, Notched | 0.500 J/cm @Temperature -30.0 °C |
0.937 ft-lb/in @Temperature -22.0 °F |
ASTM D256 |
SABIC Innovative Plastics Lexan® BM5225X PC (Asia Pacific) BM5225X resin is a mineral filled grade featuring of high modulus, good flow and ductility, low warpage. It is of non-Br & non-Cl flame retardant systems intended to meet thin wall flame resistance .. |
|||
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
Gharda Chemicals GATONE™ 5630FC Polyetheretherketone (PEEK)
(discontinued **) Characteristics: Outstanding Chemical Resistance Outstanding Wear Resistance Outstanding Resistance to HydrolysisExcellent Mechanical Properties Outstanding Thermal properties Very good Dielectric.. |
|||
Izod Impact, Notched | 0.500 - 0.550 J/cm @Temperature -40.0 - -20.0 °C |
0.937 - 1.03 ft-lb/in @Temperature -40.0 - -4.00 °F |
Average value: 0.642 J/cm Grade Count:1 |
Overview of materials for Polycarbonate, 20% Glass Filled This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, 20% Glass Filled". Specific grades with glass content between 15% and 24% are included. E.. |
|||
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ISO 180 |
Solvay Specialty Polymers Ixef® 3006/9019 Polyarylamide, 30% Carbon Fiber, at Equilibrium (65% RH)
(discontin The IXEF compounds are a family of semi-crystalline polyarylamide thermoplastics reinforced with glass fibers and/or mineral fillers for injection molding.Data provided by the manufacturer, Solvay A.. |
|||
Izod Impact, Notched | 0.500 - 1.0678 J/cm @Temperature -29.0 - 0.000 °C |
0.937 - 2.0004 ft-lb/in @Temperature -20.2 - 32.0 °F |
Average value: 0.784 J/cm Grade Count:2 |
Overview of materials for PVC/Acrylic Alloy This property data is a summary of similar materials in the MatWeb database for the category "PVC/Acrylic Alloy". Each property range of values reported is minimum and maximum values of appropriate .. |
|||
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
Global POM-270 Low Melt Acetal Information provided by Global Polymers Corporation. |
|||
Izod Impact, Notched | 0.500 - 0.550 J/cm | 0.937 - 1.03 ft-lb/in | ASTM D256 |
Loxim 230 01V0 Polybutylene Terephthalate Information provided by Loxim Industries |
|||
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
Solvay Specialty Polymers Ixef® 2030 Polyarylamide (PARA), 55% GlassMineral Ixef® 2030 is a 55% glass-fiber/mineral reinforced polyarylamide compound which exhibits high strength, very high stiffness, low warpage, excellent creep resistance and outstanding surface gloss... |
|||
Izod Impact, Notched | 0.500 J/cm @Temperature -30.0 °C |
0.937 ft-lb/in @Temperature -22.0 °F |
ASTM D256 |
SABIC Innovative Plastics NORYL GFN1720 PPE+HIPS (Europe-Africa-Middle East) Noryl* GFN1720 is a 20% glass fiber reinforced, injection moldable grade. This modified polyphenylene ether resin is designed to deliver a balance of heat, strength and electrical properties. Noryl .. |
|||
Izod Impact, Notched | 0.500 J/cm @Temperature -30.0 °C |
0.937 ft-lb/in @Temperature -22.0 °F |
ASTM D256 |
SABIC Innovative Plastics NORYL GTX GTX6203 PPE+PA NORYL GTX6203 is a 20% talc filled material with superior dimensional stability, excellent processability and surface appearance. |
|||
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ISO 180 |
Wellman Wellamid® 22L-N Unfilled Nylon 66, Lubricated Typical Applications: Automotive components, gears, switches, bearings, pulleys, fasteners, electrical coil forms, chain-saw hand guards, cable ties, furniture hardware, small appliance housings, ae.. |
|||
Izod Impact, Notched | 0.500 J/cm @Temperature 23.0 °C |
0.937 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
Polyram PlusTek PB340S6 Nylon 6, 30% Glass beads 30% glass beads reinforced polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Izod Impact, Notched | 0.500 J/cm @Temperature 23.0 °C |
0.937 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
Polyram PlusTek RA307G4 Nylon 6.6, 20% Glass Fiber 20% glass fiber reinforced heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Izod Impact, Notched | 0.500 J/cm @Temperature 23.0 °C |
0.937 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
Polyram RamSter PF300G2 PBT, 10% Glass Fiber 10% Glass-Fiber reinforced PBT for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
E-Polymers TEKAMID® TA210M40 , 40% Mineral Filled PA66, DAM 40% Mineral filled, Heat resistance, PlatableInformation provided by E-Polymers Co. Ltd. |
|||
Izod Impact, Notched | 0.500 J/cm @Temperature >=23.0 °C |
0.937 ft-lb/in @Temperature >=73.4 °F |
ASTM D256 |
Carmel Olefins CAPILENE® E 50 E Polypropylene Homopolymer CAPILENE® E 50 E is a low melt flow rate polypropylene homopolymer intended for extrusion, thermoforming and blow molding featuring very good process ability and melt stability. Products manufactur.. |
|||
Izod Impact, Notched | 0.500 - 0.600 J/cm @Thickness 6.35 mm |
0.937 - 1.12 ft-lb/in @Thickness 0.250 in |
ASTM D256 |
Chang Chun Plastic PBT1100L General Purpose PBT Information provided by Dowell Trading Company Ltd. |
|||
Izod Impact, Notched | 0.500 - 0.700 J/cm @Thickness 6.35 mm |
0.937 - 1.31 ft-lb/in @Thickness 0.250 in |
ASTM D256 |
Chang Chun Plastic PBT3015 15% Glass Fiber Enforced PBT Information provided by Dowell Trading Company Ltd. |
|||
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
Adell RA-14 Copolymer Polypropylene, 20% Talc Filled Data provided by Adell Plastics, Inc. |
|||
Izod Impact, Notched | 0.500 - 0.630 J/cm | 0.937 - 1.18 ft-lb/in | Average value: 0.553 J/cm Grade Count:3 |
Overview of materials for PEKK, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "PEKK, Unreinforced". Each property range of values reported is minimum and maximum values of appropriate.. |
|||
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
Gharda Chemicals Gafone S 1500 Polysulfone (PS)
(discontinued **) Characteristics: High Temperature Resistance - Tg 189°C Excellent Clarity Excellent Mechanical & Electrical properties Easy to process Very good Hydrolytic Resistance Applications: Elec.. |
|||
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
Ineos J50-1000-178 HDPE A high density polyethylene copolymer intended for the injection molding of closures for beverages. Because of its high purity and excellent organoleptic properties, this grade is certified as low .. |
|||
Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
Ineos J50-1000-187 HDPE A high density polyethylene copolymer. It has a narrow molecular weight distribution and is intended for the injection molding of screw caps dedicated to the packaging of still water. This resin con.. |
|||
Izod Impact, Notched | 0.500 - 3.00 J/cm @Thickness 3.20 - 3.20 mm |
0.937 - 5.62 ft-lb/in @Thickness 0.126 - 0.126 in |
Average value: 1.14 J/cm Grade Count:4 |
Overview of materials for Polypropylene, Sheet/Thermoforming Grade This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Sheet/Thermoforming Grade". Each property range of values reported is minimum and maximum.. |