Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Tensile Strength at Break = 20.7 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Tensile Strength at Break 20.7 MPa
3000 psi
2 in/min; ASTM D638
RheTech Products FT5100-04 Thermoplastic Polyolefin, UV Stabilized, White
Applications: IP structural componentBody side moldingInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break 20.7 MPa
3000 psi
2 in/min; ASTM D638
RheTech Products HP521-00 15% Talc Reinforced High Performance Polypropylene Copolymer, Non-UV Stabilized, Natural
Applications: Interior trimIP structural componentsCenter consolesInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break 20.7 MPa
3000 psi
2 in/min; ASTM D638
RheTech Products HP521-188 15% Talc Reinforced High Performance Polypropylene Copolymer, UV Stabilized, 9777 Medium Beige
Applications: Interior trimIP structural componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break 20.7 MPa
3000 psi
UL 1581
PolyOne OnFlex™ HFFR 315-01 Thermoplastic Elastomer (TPE)
OnFlex™ HFFR 315-01 a is non-halogen flame retardant material designed for flexible power cord insulation, cable jackets, and ribbon cables. New Product. Commercial specifications have not been est..
Tensile Strength at Break 20.7 MPa
3000 psi
UL 1581
PolyOne OnFlex™ HFFR 320-01 Thermoplastic Elastomer (TPE)
OnFlex™ HFFR 320-01 is a non-halogen flame retardant material designed for flexible power cord insulation and cable jackets. New Product. Commercial specifications have not been established. - Non-..
Tensile Strength at Break 20.7 MPa
3000 psi
510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible A4D02 Polyvinyl Chloride, Flexible (PVC, Flexible)
A flexible transparent PVC Compound designed primarily for indoor mats.Information provided by PolyOne
Tensile Strength at Break 20.7 MPa
3000 psi
510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible A5D00 Polyvinyl Chloride, Flexible (PVC, Flexible)
Recommended for interior applications.Information provided by PolyOne
Tensile Strength at Break 20.7 MPa
3000 psi
510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible A5DUB Polyvinyl Chloride, Flexible (PVC, Flexible)
Information provided by PolyOne
Tensile Strength at Break 20.7 MPa
3000 psi
Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible R1700L Polyvinyl Chloride, Flexible (PVC, Flexible)
Information provided by PolyOne
Tensile Strength at Break 20.7 MPa
3000 psi
Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible XV3437 Polyvinyl Chloride, Flexible (PVC, Flexible)
All ingredients used in the formulation of this compound are listed in the United States FDA Code of Federal Regulations, Title 21. The only restriction is that the plasticizer is For foods of high ..
Tensile Strength at Break 20.7 MPa
3000 psi
Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible XV3784 Polyvinyl Chloride, Flexible (PVC, Flexible)
All ingredients used in the formulation of this compound are listed in the United States FDA Code of Federal Regulations, Title 21. The only restriction is that the plasticizer is For foods of high ..
Tensile Strength at Break 20.7 MPa
3000 psi
ASTM D638
Resirene Resirene® 6420 Super High Impact Polystyrene
Features:Super High ImpactEasy ProcessingLow ModulusFlexibilityFDA Rating: 21 CFR 177.1640Applications:ExtrusionDeep ThermoformingGPPS/HIPS BlendsPoint of Purchase DisplaysInformation provided by US..
Tensile Strength at Break 20.7 MPa
3000 psi
Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible R1480E Polyvinyl Chloride, Flexible (PVC, Flexible)
Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne
Tensile Strength at Break 20.7 MPa
3000 psi
ASTM D4894
3M Dyneon™ CC655 PTFE, 50% Stainless Steel Filled  (discontinued **)
Type II, free flowing.Typical Applications: Finished or semi-finished parts: sheets, rods, tubes, billets for skiving of films or machining into complex shapes.Information provided by the Dyneon div..
Tensile Strength at Break 20.7 MPa
3000 psi
ASTM D638
Teknor Apex APEX® 3611-85 Polyvinyl Chloride, Flexible
Uses: Medical/Healthcare Applications Agency Ratings: NSF 61 Forms: Pellets Additional Information: Second Generation SeriesInformation Provided by Teknor Apex
Tensile Strength at Break 20.7 MPa
3000 psi
ASTM D638
Teknor Apex APEX® 6500-105 Polyvinyl Chloride, Flexible
Notes: 60°C General Purpose; RoHS Compliant Uses: Connectors; Grommets; Plugs; Strain ReliefsForms: Pellets Processing Method: Extrusion Agency Ratings: UL QMFZ2 .E54709 Wire Types: Molded Compon..
Tensile Strength at Break 20.7 MPa
3000 psi
ASTM D638
A. Schulman POLYFORT™ FPP 4529 Mineral Filled Copolymer Polypropylene
DescriptionPolyfort® FPP 4528 is a mineral filled copolymer polypropylene for applications requiring good impact and increased stiffness with long term heat stability.Information provided by A. Sch..
Tensile Strength at Break 20.7 MPa
3000 psi
ASTM D638
A. Schulman POLYTROPE™ TPP 510 Injection Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 510 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi..
Tensile Strength at Break 20.7 MPa
3000 psi
ASTM D638
A. Schulman POLYFORT™ FPP 4529 Mineral Filled Copolymer Polypropylene
DescriptionPolyfort® FPP 4528 is a mineral filled copolymer polypropylene for applications requiring good impact and increased stiffness with long term heat stability.Information provided by A. Sch..
Tensile Strength at Break >= 20.7 MPa

@Temperature 23.9 °C
>= 3000 psi

@Temperature 75.0 °F
Master Bond EP21TDC-2AN Two Component, Flexibilized, Highly Thermally Conductive, Electrically Insulating Epoxy Resin
Product Description: Master Bond Polymer System EP21TDC-2AN is a two component flexible epoxy resin compound for high performance bonding, sealing, coating, and encapsulation. This system’s thermal..
Tensile Strength at Break 20.7 MPa
3000 psi
ASTM D638
Americas Styrenics EC6600 High Impact Polystyrene
Product CharacteristicsExcellent printabilityMatte surface finishHigh heat distortion temperatureGood low temperature toughnessFood Contact CompliantTypical ApplicationsLithographic sheetPrinted toy..
Tensile Strength at Break 20.7 MPa
3000 psi
at max load; ASTM D638
A. Schulman PP 1227E-01 Polypropylene High-Impact Polypropylene
DescriptionPolypropylene PP 1277E-01 is a low-flow, high-impact polypropylene for film, profile, tubing and coating.Information provided by A. Schulman.
Tensile Strength at Break 20.7 MPa
3000 psi
ASTM D638
A. Schulman POLYTROPE™ TPP 510 Injection Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 510 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi..
Copyright © lookpolymers.com All Rights Reserved