Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 32.0 - 32.0 MPa @Temperature 100 - 100 °C |
4640 - 4640 psi @Temperature 212 - 212 °F |
Average value: 32.0 MPa Grade Count:1 |
Overview of materials for Polyphthalamide (PPA), High Impact This property data is a summary of similar materials in the MatWeb database for the category "Polyphthalamide, High Impact". Each property range of values reported is minimum and maximum values of a.. |
|||
Tensile Strength, Yield | 32.0 MPa @Temperature 100 °C |
4640 psi @Temperature 212 °F |
ISO 527 |
Solvay Specialty Polymers Amodel® ET-1001 L Polyphthalamide (PPA) Resin, Dry as Molded
(discontinued **) AMODEL ET-1001 L resin is an impact modified polyphthalamide (PPA) with exceptional impact strength and practical toughness. AMODEL PPA resins offer high fatigue strength, and good chemical resistan.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | 50mm/min; ASTM D638 |
Reliance Industries Repol H200MA Polypropylene REPOL Polypropylene H200MA is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | ISO 527-1, 2 |
LyondellBasell Moplen HP400L Polypropylene Homopolymer Description: All ingredients in HP400L meet the chemical registration requirements of TSCA (U.S.) and DSL (Canada). Uses: Toys, containers, lids, medical applications, closure capsInformation provid.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | ASTM D638 |
LyondellBasell Pro-fax PD702 Polypropylene Homopolymer, High Flow Primary Processing Method: Injection MoldingKey Features: high flow polypropylene homopolymer resin for injection molding, FDA acceptable, ease of processing allows increased design freedom and high.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | 200°C for 1,000 hrs; ASTM D1458 |
Fujipoly Industries Sarcon® 20GTR Thin-Film GTR Sarcon TR is Fujipolys originally developed High Heat Conductive Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Sarcon GTR is a composite of .. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | 50 mm/min; ISO 527-1,-2 |
Inno-Comp INNOPOL® CS 1-3130 30% Talc-Filled Polypropylene Homopolymer INNOPOL® CS 1-3130 is a 30% talc-filled polypropylene homopolymer compound /PP-H TD30 (ISO 1043)/. This grade is available in natural and custom colored form as well.INNOPOL® CS 1-3130 is reco.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP STAT-LOY A3000T ABS LNP* STAT-LOY A3000T is a compound based on ABS. Added features of this grade include: Antistatic, Clear. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | ISO 527 |
SABIC Innovative Plastics LNP STAT-LOY A3000T ABS (Asia Pacific) LNP* Stat-loy* A3000T is a compound based on Acrylonitrile Butadiene Styrene resin containing Anti-Static. Added features of this material include: Antistat. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | 50mm/min; ISO 527-2 |
Borealis PS65T20 Polypropylene Compound, Mineral Filled PS65T20 is a 20% mineral filled polypropylene compound intended for injection and back injection molding. This material has excellent balanced mechanical properties and high melt flow rate. Applic.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | ISO 527 |
Unipetrol PP MONSTEN® NB 425 Polypropylene Homopolymer Made for non-woven textiles applications. Basic stabilization. Homopolymer.Information provided by Unipetrol RPA |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | at 50 mm/min; ASTM D638 |
A. Schulman PP 1248-01 Polypropylene High-Flow Homopolymer Polypropylene DescriptionPolypropylene PP 1248-01 is a high-flow homopolymer polypropylene nucleated and anti static designed for the high speed molding of thin-walled, multi-cavity parts. ApplicationTypical appl.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | ISO 527-2 |
Total PSI 3630 Medium Impact Polystyrene 3630 is an easy flowing, medium impact polystyrene for injection molding. This grade offers a good compromise of flow and softening point allowing for the production of large and complex articles a.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | |
TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 20 PHR Fumed Silica - Wacker HK N20 MILLATHANE E34 is a high performance polyether polyurethane rubber for applications requiring: high abrasion resistance, low temperature flexibility, ozone resistance, oil and fuel resistance, outst.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | 50 mm/min; ASTM D638 |
A. Schulman PP 1621 Polypropylene Low Flow Homopolymer Polypropylene DescriptionPolypropylene PP 1621 is a low flow homopolymer polypropylene primarily used for sheet strapping and profile extrusion applications.ApplicationPP 1621 meets FDA Regulation 21 CFR 177.1520.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | ISO 527-2/50 |
ExxonMobil Exxtral™ HMU 216 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin characterized by high stiffness and designed for automotive exterior applications in which good surface finish and good UV resistance .. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | ISO 527-2/50 |
ExxonMobil PP1064L1 Polypropylene Homopolymer Product Description: A homopolymer resin designed for general use. It is suitable for masterbatch carrier and other compounding applications and for the molding of caps, cups, containers and other .. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | molded and tested in accordance with ASTM D 4101; ASTM D638 |
Dow 5D98 Polypropylene Resin DOW 5D98 is intended for use in oriented polypropylene (OPP) film processes.Information provided by DowDow Announced Sale of Global Polypropylene Business to Braskem in July 2011. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | 2 in/min, Type IV bar; ASTM D638 |
Chevron Phillips Marlex® 9519H High Density Polyethylene, Blow Molding This gas phase, high molecular weight, homopolymer with antistatic agent is tailored for lightweight blow molded applications that:Require excellent stiffness to ESCR ratioRequire good melt strength.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | ISO R527 |
Arkema Group Orgalloy® LE 60 LM Polyamide Alloy Polyamide Alloy, Film and PackagingInformation provided by Arkema Group |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | 50 mm/min |
Arkema Group Orgalloy® LE 60LM Flexible Nylon Alloy (Conditioned) LE series, flexible polyamide alloys: processability on PE screw, low moisture absorption, chemical resistance (no known solvents).ISO data provided by the manufacturer, Arkema. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | 50 mm/min |
Arkema Group Orgalloy® LE 60LMES Flexible Nylon Alloy (Conditioned) LE series, flexible polyamide alloys: processability on PE screw, low moisture absorption, chemical resistance (no known solvents).ISO data provided by the manufacturer, Arkema. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0336C20L Calcium Reinforced |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0336W40L1 Wollastonite Reinforced |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | 50 mm/min; ASTM D638 |
Carmel Olefins CAPILENE® T 89 E Polypropylene Homopolymer Description: CAPILENE® T 89 E is a high melt flow rate homopolymer for continuous filaments, staple fibers and for injection molding. It is formulated with an anti-gasfading stabilization package.. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | |
BASF Polystyrol® 445 E WU Impact Grade Polystyrene (Europe) Easy flowing, heat-resistant, medium-impact, flame-retardant grade. Application example: electrical distribution boxes.Data was collected by ISO methods and provided by BASF. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | 2 in/min; ASTM Test |
BASF Ultramid® 8253 PA6 (Conditioned) Ultramid 8253 is an unfilled, impact modified type 6 graft copolymer developed for both injection molding and extrusion applications. It is also available in heat stabilized (Ultramid 8253 HS) and/o.. |
|||
Tensile Strength, Yield | 32.0 MPa @Temperature 80.0 °C |
4640 psi @Temperature 176 °F |
ISO Data |
Styrolution Luran® 368 R SAN General-purpose grade with well-balanced properties intended for both injection molding and extrusion.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS. |
|||
Tensile Strength, Yield | 32.0 MPa | 4640 psi | ASTM D638 |
BP Amoco Acclear® 8949 Random Copolymer Polypropylene, High Clarity Grade
(discontinued **) Suggested fabrication methods: Injection molding; Stretch blow moldingFeatures: Ultra high clarity, Excellent static controlTypical applications: Housewares, Thin-walled containers, Rigid packagingC.. |