Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Modulus | 2.10 GPa | 305 ksi | ASTM D790 |
Nylene® 734 Nylon 6 Dry as molded. Injection molding grade. Nylene 734 is the heat stabilized version of 733 which is a high impact modified nylon suitable for both molding and extrusion. In addition to heat stabiliza.. |
|||
Flexural Modulus | 2.10 GPa @Temperature 23.0 °C |
305 ksi @Temperature 73.4 °F |
ISO 178 |
Polykemi AB POLYfill PP CPX10030 UV Polypropylene, Mineral Reinforced Information provided by Polykemi AB |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | 1.3 mm/min, 50 mm span; ASTM D790 |
SABIC Innovative Plastics Cycoloy® CY100FC PC+ABS (Asia Pacific) High impact PC+ABS material designed for local Pacific Automotive applications |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ASTM D790 |
Eastman Eastalloy MA510 Polymer
(discontinued **) Eastalloy MA510 Polymer is a clear copolyester/polycarbonate alloy. It affords the consumer excellent impact strength, chemical resistance, dimensional stability, low shrinkage rates and other enhan.. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ASTM D790 |
Eastman Eastar GN005 Copolyester, Natural
(discontinued **) Eastar GN005 Copolyester is a glycol modified polyethylene terephthalate (PET) with an added mold release. Eastar GN005 copolyester will not crystallize and thus offers wider processing latitude tha.. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ISO 178 |
Eastman Eastar GN125 Copolyester, Natural
(discontinued **) Eastar Copolyester GN125 is a glycol modified polyethylene terephthalate (PET) that contains an ultraviolet light inhibitor. This product is recommended for indoor applications requiring enhanced co.. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | 2 mm/min; ISO 178 |
SABIC Innovative Plastics Lexan® EXL9134 PC Copolymer (Asia Pacific) Lexan* EXL9134 polycarbonate (PC) siloxane copolymer resin is a UV stabilized high flow opaque injection molding (IM) grade. This resin offers UL94 V0 @ 1.5mm flame retardancy based on non-bromine, .. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | 1.3 mm/min, 50 mm span; ASTM D 790 |
SABIC Innovative Plastics Lexan® FXD9810U PC Copolymer (Asia Pacific) Polycarbonate with high flow, excellent processability, good impact and thermal properties, UV stabilized, non-Chlorine and non-Bromine flame retardant, UL rated V-0 and V-1. Available in limited di.. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ASTM D790 |
Ineos ABS Lustran® QE 1094 AS General Purpose, High-Impact
(discontinued **) Information provided by Bayer Corporation, Plastics DivisionLANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a JV with La.. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ASTM D790 |
Ineos ABS TRIAX® 1120 ABS/Nylon Blend, Injection Grade, Dry as Molded Injection molding grade with good flow and stress corrosion cracking resistance, good chemical resistance (fuel, cleaning agents), high impact and notched impact strength, good acoustical damping be.. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | 2 mm/min; ISO 178 |
SABIC Innovative Plastics Noryl V190 PPE+HIPS (Europe-Africa-Middle East) NORYL V190 is an unfilled flame retardant material with a Vicat B/120 of 90°C according ISO 306. NORYL V190 is V1 at 2.0 mm according UL94 and halogen free according VDE/DIN 472 part 815.This dat.. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | 2 mm/min; ISO 178 |
SABIC Innovative Plastics LNP Lubricomp NL002 PC+ABS (Europe-Africa-Middle East) LNP* Lubricomp* PCAL4020S is a compound based on PC+ABS Blend resin containing PTFE.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | 2 mm/min, 64mm span; ISO 178 |
SABIC Innovative Plastics SABIC PPCOMPOUND 9712 PP SABIC® PPcompound 9712 is a mineral filled, impact modified polypropylene TPO. This material combines high impact resistance, scratch resistance, and heat stability with interior automotive UV st.. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | 1.3 mm/min, 50 mm span; ASTM D790 |
SABIC Innovative Plastics Valox® IQ357 PBT+PC (Asia Pacific) Valox* Resin IQ357: Environmentally responsible, low carbon footprint iQ* PBT + PC alloy. UL94 V-0 @0.63 mm. Impact modified. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | 1.3 mm/min, 50 mm span; ASTM D790 |
SABIC Innovative Plastics Valox® IQ357U PBT+PC Valox* Resin IQ357U: Environmentally responsible, low carbon footprint iQ* PBT + PC alloy. UL94 V-0 @0.63 mm. Impact modified and UV stabilized resin. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ISO 178 |
Styrolution PS 495N HIPS Styrolution PS 495N is an impact resistant polystyrene with a good balance of toughness, high flow, heat resistance and high gloss.High flowGood balance of toughness and heat resistanceUL 94 HBInfor.. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | 2 mm/min; ISO 178 |
SABIC Innovative Plastics Valox® V3004 PBT (Asia Pacific) Unfilled PBT modified with elastomer. Targeted for flexible hinge, automotive connectors, film applications. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ISO 178 |
Polyram PlusTek PA862 Nylon 6.6 for Injection Molding, High Impact Modified High impact modified Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ISO 178 |
Polyram RamLloy PBB704 PC/ABS Alloy, UV Stabilized PC/ABS alloy, UV stabilized, for injection molding applications.Information provided by Polyram. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | |
Zeon Chemicals Zeonex® 480R Cyclo-Olefin Polymer |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ISO 178 |
Polyram RamShine PV111 Acrylonitrile Butadiene Styrene General purpose ABS for injection molding applications.Information provided by Polyram. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ASTM D 790 |
Cossa Polimeri ESTASTIR HI 0508 V0 Flame Retardant Polystyrene Flame retardant class V0, PBDE free, good impact resistance, good thermal resistance, good processabilityInformation provided by Cossa Polimeri S.r.l. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ASTM D790 |
Covestro Makrolon® T 7435 Polycarbonate, High Impact Impact modified injection molding grade, extremely easy flow and easy mold release, housings for portable mobile phones.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience wa.. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ISO 178 |
Eurostar Starpylen HU 30E4 ECR PP, Mineral Filled, Injection Molding Starpylen HU 30E4 ECR is a reinforced Polypropylene with a low carbon footprint renewable mineral filler, Injection Molding Resin (also known as HUS30E4ECR)Information provided by Eurostar. |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ISO 178 |
A.D. Compound Adene NTTAG Copolymer 40% Talc Filled Polypropylene Information provided by A.D. Compound |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ASTM D790 |
Ashley Polymers Ashlene® 630BU Nylon 6 Black utility grade Nylon 6 for injection molding.Data provided by the manufacturer |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | 23°C, 50% RH; ASTM D790 |
Asahi Kasei Xyron® X5403 PPE/PA Oil ResistantInformation provided by Asahi Kasei |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | ASTM D790 |
Ashley Polymers Ashlene® R3137 BK PC/PBT A thermoplastic alloy offering a high level of chemical resistance combined with high impact and excellent mechanical properties. Black.Data provided by the manufacturer |
|||
Flexural Modulus | 2.10 GPa | 305 ksi | 1.3 mm/min, 50 mm span; ASTM D790 |
SABIC Innovative Plastics Lexan® ML1661 PC Copolymer (Asia Pacific) Medium-flow impact-modified light-shielding high-flow-ductile PC copolymer. Available in white color only. |
|||
Flexural Modulus | 2.10 - 5.52 GPa | 305 - 800 ksi | Average value: 3.31 GPa Grade Count:25 |
Overview of materials for Polypropylene with 30% Mica Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 30% Mica Filler". Specific grades with primary filler content between 25% and 34% are.. |