Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 240 °C | 464 °F | |
Omnia Plastica Akulon® PA 66.6 - Akulon GX - at 50% RH Copolymer of nylon with excellent mechanical features, it combines the good impact resistances of PA6 as well as the higher stiffness of PA66. For this reason it machines very well on automatic tool.. |
|||
Melting Point | 240 - 260 °C | 464 - 500 °F | SABIC (IRC0053) |
SABIC HC100 Crystalline Polyethylene Terephthalate Product Description: HC100 is a crystalline, high molecular weight thermoplastic polymer made by a continuous melt-phase polymerization process followed by solid-state polymerization.Characteristic.. |
|||
Melting Point | 240 °C | 464 °F | Crystalline, Peak; ASTM D3418 |
Quadrant EPP Symalit® ECTFE Ethylene-Chlorotrifluoroethylene (ASTM Product Data Sheet) |
|||
Melting Point | 240 °C | 464 °F | ISO 11357-3 |
Pasargad Polymer Peyvand Pasadur 3P-H8130B PBT, 30% Glass Fiber Reinforced Form: PelletsProcessing Method: Injection MoldingUses: Automotive Application Furniture Appliance Components Automotive Exterior PartsAutomotive Interior PartsInformation provided by Pasargad Poly.. |
|||
Melting Point | 240 °C | 464 °F | Crystalline Peak Melting Point; ASTM D3418 |
Eastman 9921 PET Injection Molded
(discontinued **) VORIDIAN polymer 9921 is a copolymer PET that has been crystallized. Color concentrates of polymer 9921 are available on request.Applications/UsesAutomotive parts containersFood packagingHousehold p.. |
|||
Melting Point | 240 °C | 464 °F | Average value: 240 °C Grade Count:10 |
Overview of materials for Polyarylamide, Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyarylamide, Glass Fiber Filled". Each property range of values reported is minimum and maximum values.. |
|||
Melting Point | 240 - 271 °C | 464 - 520 °F | Average value: 255 °C Grade Count:6 |
Overview of materials for Fluorocarbon ETFE/ECTFE, Molded/Extruded This property data is a summary of similar materials in the MatWeb database for the category "Fluorocarbon ETFE/ECTFE, Molded/Extruded". Each property range of values reported is minimum and maximum.. |
|||
Melting Point | 240 °C | 464 °F | crystalline melting point; ASTM D4591 |
Honeywell Halar® High Performance E-CTFE Film
(discontinued **) Description: Halar® is a high performance Ethylene-Chlorotrifluoroethylene (E-CTFE) film with excellent mechanical, electrical and release properties. It is non-flammable, and has outstanding chem.. |
|||
Melting Point | 240 °C | 464 °F | Target; M2E-73-002 |
Indorama Ventures Mexico Polyclear™ Plus 1111 PET Resin Description: La resina Polyclear® Plus PET 1111 de Arteva Specialties, es un copolimero para empaque con una viscosidad intrinseca de 0.84 dl/g. Los envases fabricados con este material tienen un.. |
|||
Melting Point | 240 °C | 464 °F | |
Techmer ES Plastiblend® PA6/6,6 109 L Nylon 6/66 Availability: North AmericaForms: PelletsAdditive: LubricantFeatures: Copolymer and LubricatedProcessing Method: Injection MoldingInformation provided by TP Composites, Inc. |
|||
Melting Point | >= 240 °C | >= 464 °F | |
Wellman PermaClear™ 61803 (0.81 IV) PET PermaClear® 61803 is a TPA-based polyethylene terephthalate resin made especially for use in packaging applications. It is a solid-stated copolymer resin with an intrinsic viscosity 0.81 IV. PermaC.. |
|||
Melting Point | >= 240 °C | >= 464 °F | BD-61305 |
Wellman PermaClear™ HP806 (0.84 IV) PET PermaClear® HP806 is a TPA-based polyethylene terephthalate resin made especially for use in packaging applications. It is a solid-stated copolymer resin with an intrinsic viscosity 0.84 IV. PermaC.. |
|||
Melting Point | 240 °C | 464 °F | nominal; DAK-QAR-SOP-0016 |
DAK Americas Laser+® W PJ002 F43A PET Product Description: Laser+® W PJ002 (F43A) polyethylene terephthalate (PET) resin is a copolymer formulated for conversion to PET bottles by conventional single or two-stage processing technology... |
|||
Melting Point | >= 240 °C | >= 464 °F | |
Ex-Tech Plastics VersaTech™ APET Ex-Tech VersaTech™ APET has exceptional properties such as visual transparency high heat distortion and it has good resistance to mineral oils, solvents and acids.Characteristics:TransparentExcepti.. |
|||
Melting Point | 240 °C | 464 °F | DIN 53765 |
BASF Ultramid® C3U10 PA6/66 FR (Conditioned) Description: Flame-retardant injection-molding grade; light colorable. Burning behavior optimized for glow-wire requirements of IEC 60335. Typical applications are switches, housings, plug connector.. |
|||
Melting Point | 240 °C | 464 °F | DIN 53765 |
BASF Ultramid® C3UG4 20% Glass Filled PA6/66 (Conditioned) Description: Halogen-free and phosphorus-free flame retardant injection-molding grade with outstanding free-flow properties, good electrical properties and low smoke density; resistant to glow wire .. |
|||
Melting Point | 240 °C | 464 °F | MPC Method |
Mitsui TPX® DX820 Methylpentene Copolymer TPX® is a 4-methylpentene-1 based polyolefin with a unique combination of transparency, heat and chemical resistant qualities. TPX is used in a wide variety of applications, including: medical equi.. |
|||
Melting Point | 240 °C | 464 °F | MPC Method |
Mitsui TPX® MX004 Methylpentene Copolymer TPX® is a 4-methylpentene-1 based polyolefin with a unique combination of transparency, heat and chemical resistant qualities. TPX is used in a wide variety of applications, including: medical equi.. |
|||
Melting Point | 240 °C | 464 °F | MPC Method |
Mitsui TPX® RT18 XB Methylpentene Copolymer TPX® is a 4-methylpentene-1 based polyolefin with a unique combination of transparency, heat and chemical resistant qualities. TPX is used in a wide variety of applications, including: medical equi.. |
|||
Melting Point | 240 °C | 464 °F | |
Solvay Specialty Polymers Ixef® 1313/0004 Polyarylamide, 40% Glass Fiber + Elastomer, DAM
(discontinued **)&l Impact modified. The IXEF compounds are a family of semi-crystalline polyarylamide thermoplastics reinforced with glass fibers and/or mineral fillers for injection molding.Data provided by the manu.. |
|||
Melting Point | 240 °C | 464 °F | |
Solvay Specialty Polymers Ixef® 1313/0004 Polyarylamide, 40% Glass Fiber + Elastomer, at Equilibrium (65% RH)
  Impact modified. The IXEF compounds are a family of semi-crystalline polyarylamide thermoplastics reinforced with glass fibers and/or mineral fillers for injection molding.Data provided by the manu.. |
|||
Melting Point | 240 °C | 464 °F | |
Solvay Specialty Polymers Ixef® 2010/X914 Polyarylamide, 40% Filler, at Equilibrium (65% RH)
(discontinued ** The IXEF compounds are a family of semi-crystalline polyarylamide thermoplastics reinforced with glass fibers and/or mineral fillers for injection molding.Data provided by the manufacturer, Solvay A.. |
|||
Melting Point | 240 °C | 464 °F | |
Solvay Specialty Polymers Ixef® 3006/9019 Polyarylamide, 30% Carbon Fiber, DAM
(discontinued **) The IXEF compounds are a family of semi-crystalline polyarylamide thermoplastics reinforced with glass fibers and/or mineral fillers for injection molding.Data provided by the manufacturer, Solvay A.. |