Polymer Property : Cure Time = 480 min Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Processing Properties	Metric	English	Comments
Cure Time	480 min @Temperature 82.2 °C	8.00 hour @Temperature 180 °F	Complete Cure Cycle
Northstar Polymers MSB-D60A High Performance Polyurethane Cast Elastomer System This is an Ester/MDI base high-performance polyurethane casting system. This systems is recommended to applications in which the part requires some lord bearing, high tensile strength, cut/tear res..
Cure Time	480 min @Temperature 82.2 °C	8.00 hour @Temperature 180 °F	Complete Cure Cycle
Northstar Polymers MSB-M25B Microcellular Foam based on High Performance Polyester Polyurethane This high performance polyester microcellular foam system is one of a family of polymer systems developed by Northstar Polymers for demanding work environments. Urethane foams molded with this syste..
Cure Time	480 - 960 min @Temperature 71.1 - 82.2 °C	8.00 - 16.0 hour @Temperature 160 - 180 °F	Complete Cure Cycle
Northstar Polymers MSN-V40A Polyester Base Low-Rebound Impact/Vibration Dampening Gel This polyurethane casting material is developed for applications that require Shore OO 40 range casting material with vibration dampening property and higher strength than standard polyurethane gel ..
Cure Time	480 min @Temperature 25.0 °C	8.00 hour @Temperature 77.0 °F	De-mold Time
Northstar Polymers GK-7 Low Viscosity Polyurethane Gel Cast This material is formulated for production of thin polyurethane gel film or parts. The low viscosity property of the mixed component enables the user to cast this into a thin layer without entrappi..
Cure Time	480 min @Temperature 60.0 °C	8.00 hour @Temperature 140 °F
Tra-Con Tra-Bond 724-5 Low Viscosity Polyurethane Adhesive TRA-BOND 724-5 is a premixed and frozen, electrically insulating, polyurethane adhesive. This resilient adhesive exhibits good adhesion to a wide variety of substrates, including aluminum, solder, n..
Cure Time	480 min @Temperature 75.0 °C	8.00 hour @Temperature 167 °F
Tra-Con Tra-Bond 832-5 Flexible Epoxy TRA-BOND 832-5 is a flexible two component epoxy which is intended for bonding materials with mis-matched coefficients of expansion. It exhibits flexibility associated with polyurethanes but does no..
Cure Time	480 min @Temperature 75.0 °C	8.00 hour @Temperature 167 °F
Tra-Con Tra-Bond 872-7TN1 Flexible Thixotropic Epoxy Adhesive TRA-BOND 872-7TN1 is a flexible thixotropic epoxy. The high viscosity and long worklife make this material easy to handle. Also, the high thermal conductivity makes this product ideal for electronic..
Cure Time	480 - 960 min @Temperature 25.0 °C	8.00 - 16.0 hour @Temperature 77.0 °F
Trelleborg Emerson & Cuming Eccobond® 24 LV General Purpose Catalyst Emerson & Cuming 24 LV Eccobond® General Purpose CatalystFaster curing, shorter working life version of 23 LV. Recommended for small mass castings due to higher exotherm. Cure Type: Room Temp or He..
Cure Time	480 - 720 min @Temperature 65.6 °C	8.00 - 12.0 hour @Temperature 150 °F
Master Bond EP29LPSP Low Outgassing, Optically Clear Two Component Epoxy Master Bond Polymer System EP29LPSP is a two component, high performance, modified low temperature heat cured epoxy system specially formulated for cryogenic applications. EP29LPSP is serviceable at..
Cure Time	480 min @Temperature 25.0 °C	8.00 hour @Temperature 77.0 °F	Light Load
Chesterton ARC 890 Course Grade Sliding Wear Compound An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at the thickness of 6 mm (1/4”)..
Cure Time	480 min @Temperature 25.0 °C	8.00 hour @Temperature 77.0 °F	Light Load
Chesterton ARC 897 Fine Grade Sliding Wear Compound Description: ARC 897 is an advanced ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a t..
Cure Time	480 min @Temperature 16.0 °C	8.00 hour @Temperature 60.8 °F	Light Load
Chesterton ARC 988 Composite Description: A high performance, quartz reinforced composite designed to resurface and restore concrete surfaces, to protect new concrete, and to repair concrete damaged by severe chemical and physi..
Cure Time	480 min @Temperature 32.0 °C	8.00 hour @Temperature 89.6 °F	Full Load
Chesterton ARC 988 Composite Description: A high performance, quartz reinforced composite designed to resurface and restore concrete surfaces, to protect new concrete, and to repair concrete damaged by severe chemical and physi..
Cure Time	480 min @Temperature 25.0 °C	8.00 hour @Temperature 77.0 °F	Light Load
Chesterton ARC BX1 Sliding Wear Compound Description: An advanced contractor grade ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at..
Cure Time	480 min @Temperature 25.0 °C	8.00 hour @Temperature 77.0 °F	Light Load
Chesterton ARC BX2 Contractor Grade Fine Sliding Wear Compound Description: ARC BX2 is an advanced contractor grade ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It ..
Cure Time	480 min @Temperature 16.0 °C	8.00 hour @Temperature 60.8 °F	Tack Free
Chesterton ARC HT-T Spark Testable High Temperature Trowelable Abrasion Control Compound An advanced ceramic composite formulated to protect equipment from corrosion and erosion in elevated temperature water solution immersion. This system is a high viscosity composite that is applied b..
Cure Time	480 min @Temperature 16.0 °C	8.00 hour @Temperature 60.8 °F	Overcoat Begin
Chesterton ARC HT-T Spark Testable High Temperature Trowelable Abrasion Control Compound An advanced ceramic composite formulated to protect equipment from corrosion and erosion in elevated temperature water solution immersion. This system is a high viscosity composite that is applied b..
Cure Time	480 min @Temperature 25.0 °C	8.00 hour @Temperature 77.0 °F	Light Load
Chesterton ARC I BX1 Impact & Wear Resistant Epoxy Composite Description: An advanced grade epoxy and urethane composite for the repair and protection of all metal surfaces subjected to severe abrasion and impact. It is normally applied at a thickness of 6 mm..
Cure Time	480 min @Temperature 10.0 °C	8.00 hour @Temperature 50.0 °F	Full Load
Chesterton ARC NVE SYSTEM Vinyl Ester Lining Description: ARC NVE is a high performance, quartz reinforced, three-component, modified novolac vinyl ester lining capable of being applied to horizontal and vertical surfaces. The NVE system kit i..
Cure Time	480 min @Temperature 10.0 °C	8.00 hour @Temperature 50.0 °F	Tack Free
Chesterton ARC S1 General purpose coating Description: An advanced polymer composite formulated to protect metal surfaces from corrosion and chmical attack. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrink..
Cure Time	480 min @Temperature 4.00 °C	8.00 hour @Temperature 39.2 °F	Full Chemical
Chesterton MRS 5 Metal Rebuilding System MRS 5 is an advanced composite formulated for emergency repair and patching of metal components subject to light abrasive and corrosive conditions. It can be used to seal leaks and patch holes as we..
Cure Time	480 - 660 min @Temperature 22.0 °C	8.00 - 11.0 hour @Temperature 71.6 °F
Dow Corning 3-4241 DIELECTRIC TOUGH GEL KIT Two-part, translucent green, RT or heat cure, UV indicator, long working time, tough primerless chemical adhesion, UL 94 V-1 flammability classification.Information provided by Dow Corning
Cure Time	480 min @Temperature 149 °C	8.00 hour @Temperature 300 °F	Alternate
Aremco Aremco-Bond™ 2335 Ultra High Temperature Epoxy Ceramic-Filled, Low Expansion, High Lap-Shear Strength & Chemical Resistance, Low Outgassing.
Cure Time	480 min @Temperature 75.0 °C	8.00 hour @Temperature 167 °F
Tra-Con Tra-Bond 872-3 Flexible Epoxy Adhesive TRA-BOND 872-3 transparent, flexible epoxy adhesive is designed for bonding materials with mismatched coefficients of thermal expansion. The long working life of this adhesive makes it ideal for use..
Cure Time	480 min @Temperature 25.0 °C	8.00 hour @Temperature 77.0 °F
3M AC-250 B-1/6 Aerospace Sealant 3M Aerospace Sealant AC-250 B-1/6 is a two-part, polysulfide, quick repair sealant for integral fuel tank and fuselage sealing applications. The mixed compound is a thixotropic paste and can be read..
Cure Time	480 min @Temperature 43.0 °C	8.00 hour @Temperature 109 °F	Light Load
Chesterton ARC S1HB Sprayable high-viscosity, 100% solids, advanced coating An advanced composite formulated to protect concrete and metal surfaces from corrosion and chemical attack. It is normally applied at a thickness of 1-2 mm (40-80 mils) per coat. However, greater si..