Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Cure Time = 5.00 hour Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Cure Time 300 min

@Temperature 100 °C
5.00 hour

@Temperature 212 °F
NextGen Adhesives P907-30 Optical Assembly Adhesive
Description: NGAC P907-30 is a high viscosity, controlled flow encapsulant designed for microelectronics applications requiring low shrinkage and high reliability performance.Advantages and Applicat..
Cure Time 300 - 420 min

@Temperature 100 °C
5.00 - 7.00 hour

@Temperature 212 °F
De-mold Time
Northstar Polymers MSB-D60A High Performance Polyurethane Cast Elastomer System
This is an Ester/MDI base high-performance polyurethane casting system. This systems is recommended to applications in which the part requires some lord bearing, high tensile strength, cut/tear res..
Cure Time 300 min

@Temperature 163 °C
5.00 hour

@Temperature 325 °F
Initial Cure
Parker Chomerics CHO-FLEX 601 Conductive Coating
CHO-FLEX™ 601 coating is specifically designed for EMI shielding of copper/Kapton flexible circuit laminates and for printing circuits on Kapton film. Upon cure, this coating exhibits excellent adh..
Cure Time 300 - 480 min

@Temperature 25.0 °C
5.00 - 8.00 hour

@Temperature 77.0 °F
De-mold Time
Northstar Polymers MPG-A25A Room-Temperature Curable Liquid Castable Polyurethane
MPG-A25A is a room-temperature-cure liquid castable polyurethane system. This ether-base polyurethane system is used in applications such as mold-making, prototyping, production of cast parts, pott..
Cure Time 300 - 360 min

@Temperature 25.0 °C
5.00 - 6.00 hour

@Temperature 77.0 °F
De-mold Time
Northstar Polymers MPP-A80E High Performance Polyether
This high performance polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this system ex..
Cure Time 300 min

@Temperature 104 °C
5.00 hour

@Temperature 220 °F
Lord Adhesives Thermosetâ„¢ LS 213-9 Unfilled Epoxy Encapsulant
Lord LS 213-9 is a one component epoxy coating and impregnating compound featuring low viscosity, good moisture resistance and excellent dielectric properties. Typical applications include transform..
Cure Time 300 - 420 min

@Temperature 80.0 °C
5.00 - 7.00 hour

@Temperature 176 °F
Tra-Con Tra-Duct 921M01 Low Viscosity Long Pot Life Silver-Filled Epoxy
TRA-DUCT 921M01 is a two component, silver-filled electrically conductive epoxy adhesive designed for applications which require electrical conductivity and a long pot life at a relatively low heat ..
Cure Time 300 - 1440 min

@Temperature 22.0 °C
5.00 - 24.0 hour

@Temperature 71.6 °F
Dow Corning Q3-6575 DIELECTRIC GEL A/B KIT
Two-part, clear, RT or heat cure and low temperature (-80°C/-112°F)stability.Information provided by Dow Corning
Cure Time 300 min

@Temperature 22.0 °C
5.00 hour

@Temperature 71.6 °F
Dow Corning SE 4448 CV KIT PARTS A&B
Excellent thermal conductivity, low volatility (D4-D10 0.03% wt), heat cure, high viscosity.Information provided by Dow Corning
Cure Time 300 min

@Temperature 10.0 °C
5.00 hour

@Temperature 50.0 °F
Tack Free
Chesterton ARC 10 Paste grade machinable composite
Description: A reinforced composite for the repair and protection of metal surfaces. It is machinable with excellent compressive strength, chemical resistance and corrosion resistance. It is non-sag..
Cure Time 300 min

@Temperature 10.0 °C
5.00 hour

@Temperature 50.0 °F
Tack Free
Chesterton ARC 858 Abrasion resistant rebuilding and faring composite
An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 0.15 mm (60 mils) or m..
Cure Time 300 min

@Temperature 32.0 °C
5.00 hour

@Temperature 89.6 °F
Tack Free
Chesterton ARC 982 100% Novolac acid resistant coating
Description: An advanced polymer composite formulated to protect equipment from extreme chemical attack and corrosion. A low viscosity composite that is applied by brush, squeegee, or a plural compo..
Cure Time 300 min

@Temperature 16.0 °C
5.00 hour

@Temperature 60.8 °F
Foot Traffic
Chesterton ARC 988 Composite
Description: A high performance, quartz reinforced composite designed to resurface and restore concrete surfaces, to protect new concrete, and to repair concrete damaged by severe chemical and physi..
Cure Time 300 min

@Temperature 10.0 °C
5.00 hour

@Temperature 50.0 °F
Tack Free
Chesterton ARC MX1 Vertical Build Extreme Wear Compound
Description: An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, abrasion and chemical attack. It is applied at a thickness of 6 mm (1/4”)..
Cure Time 300 min

@Temperature 32.0 °C
5.00 hour

@Temperature 89.6 °F
Light Load
Chesterton ARC S2 Ceramic reinforced erosion resistant coating
Description: An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% soli..
Cure Time 300 min

@Temperature 10.0 °C
5.00 hour

@Temperature 50.0 °F
Overcoat End
Chesterton ARC S7 High Temperature & Chemical Resistant Novolac Vinyl Ester Coating
Description: ARC S7 is a low VOC, epoxy novolac vinyl ester based coating intended for high temperature exposures in chemically aggressive applications where the risk for thermal cycling may be pres..
Cure Time 300 min

@Temperature 32.0 °C
5.00 hour

@Temperature 89.6 °F
Light Load
Chesterton ARC SD4i High temperature ceramic reinforced erosion resistant coating
Description: An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10-15 mils) per coat..
Cure Time 300 min

@Temperature 32.0 °C
5.00 hour

@Temperature 89.6 °F
Light Load
Chesterton MRS S2 Metal Rebuilding System
An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% solids. MRS S2 is..
Cure Time 300 min

@Temperature 32.0 °C
5.00 hour

@Temperature 89.6 °F
Tack Free
Chesterton MRS S4+ Metal Rebuilding System
An advanced polymer composite formulated to protect equipment from extreme chemical attack and corrosion. It is typically applied by spray, roller or brush at a nominal thickness of 375 microns (15 ..
Cure Time 300 min

@Temperature 10.0 °C
5.00 hour

@Temperature 50.0 °F
Tack Free
Chesterton ARC MXC Castable Extreme Wear Compound
Description: An advanced ceramic composite, with flowable viscosity, for the repair and protection of all metal surfaces subjected to severe erosion, abrasion and chemical attack. It can be hand tro..
Cure Time 300 - 360 min

@Temperature 150 °C
5.00 - 6.00 hour

@Temperature 302 °F
Abatron AboWeld 8708-5 One-Component Structural/Dielectric Epoxy
AboWeld 8708-5 is a highly filled, class H (180°C) structural, heat-conductive adhesive paste for SLOW high-temperature curing. Suggested Uses: Structural bonding; Casting; Potting; Encapsulating;..
Cure Time 300 - 360 min

@Temperature 150 °C
5.00 - 6.00 hour

@Temperature 302 °F
Abatron AboCast 8708-6 One-Component Structural/Dielectric Epoxy
AboCast 8708-6 is a highly filled, class H (180°C) structural, castable adhesive compound for SLOW high-temperature curing. Suggested Uses: Structural bonding; Casting; Potting; Encapsulating; Emb..
Cure Time 300 min

@Temperature 32.0 °C
5.00 hour

@Temperature 89.6 °F
Tack Free
Chesterton ARC S4+ 100% Novolac acid resistant coating
Description: An advanced polymer composite formulated to protect equipment from extreme chemical attack and corrosion. It is typically applied by spray, roller or brush at a nominal thickness of 375..
Cure Time 300 min

@Temperature 10.0 °C
5.00 hour

@Temperature 50.0 °F
Tack Free
Chesterton MRS 10 Metal Rebuilding System
Description: A reinforced composite for the repair and protection of metal surfaces. It is machinable with excellent compressive strength, chemical resistance It is non-sagging, non-shrinking and 10..
Cure Time 300 min

@Temperature 10.0 °C
5.00 hour

@Temperature 50.0 °F
Tack Free
Chesterton MRS 58 Metal Rebuilding System
An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 1.5 mm (60 mils) or mo..
Cure Time 300 min

@Temperature -6.70 °C
5.00 hour

@Temperature 19.9 °F
Tack-Free Time
3M AC-250 B-1/6 Aerospace Sealant
3M Aerospace Sealant AC-250 B-1/6 is a two-part, polysulfide, quick repair sealant for integral fuel tank and fuselage sealing applications. The mixed compound is a thixotropic paste and can be read..
Cure Time 300 min

@Temperature 40.0 °C
5.00 hour

@Temperature 104 °F
EN 2243-1
Hexcel® Redux® 810 Two-Part Epoxy Paste Adhesive
Redux® 810 is a multi-purpose, high shear and peel strength, two-part, toughened epoxy paste adhesive with corrosion-inhibiting properties.Features: Available in cartridges with a static mixer and ..
Copyright © lookpolymers.com All Rights Reserved