Chesterton ARC S2 Ceramic reinforced erosion resistant coating

Description: An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% solids. ARC S2 is formulated for the resurfacing of metal components subjected to extreme corrosive or severe fluid flow conditions. ARC S2 is a low viscosity composite that is designed to be spray applied but may also be applied by roller or brush. This product is formulated as a two coat system to provide extended wear life for plant equipment. Cured ARC S2 provides a high gloss ceramic surface with resistance to erosion-corrosion.Benefits:High gloss finish reduces drag, improves pump efficiency on worn componentsTough resin structure resists thermal-mechanical shockOutstanding adhesion insures reliable performance against under film corrosionLabor and downtime are reduced due to ease of application and rapid curingConvenient 2-1 volumetric mix ratio and verification of mix by color changePerforms well under fluctuating chemical environments. Suggested Uses:Fans & HousingsHeat ExchangersHoppersTank LiningsValve AssembliesWaterboxesCooling Water SystemsPump ComponentsScrubber SystemsPipeline CoatingsInformation provided by Chesterton