- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Arlon CP-594CX Bulk Compound
Arlon CP-594CX Bulk Compound
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Arlon |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Arlon CP-594CX Bulk Compound.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Product Use: Electrically insulating electronic adhesive. Bonds without primer.Appearance: Gray, high viscosity gumUL94V-0: The product is designed to meet UL94V-0 flame resistance requirements but is not recognized by Underwriters Laboratories.This data represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Information provided by Arlon, Silicone Technologies Division
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.80 g/cc | 0.101 lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 77 | 77 | Silicone Property; ASTM D2240 |
| Tensile Strength | 4.72 MPa | 685 psi | Silicone Property; ASTM D412 |
| Tensile Strength, Yield | 24.5 MPa @Strain <=1.00 % |
3550 psi @Strain <=1.00 % |
Silicone Property; Arlon-SAQ-TMS-008 |
| Elongation at Break | 125 % | 125 % | Silicone Property; ASTM D412 |
| Poissons Ratio | 0.50 | 0.50 | Approximately, Silicone Property |
| Shear Modulus | 0.00817 GPa | 1.18 ksi | Calculated |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 111 µm/m-°C @Temperature 20.0 - 160 °C |
61.7 µin/in-°F @Temperature 68.0 - 320 °F |
Silicone Property; ASTM E 831 |
| Specific Heat Capacity | 0.820 J/g-°C @Temperature 100 °C |
0.196 BTU/lb-°F @Temperature 212 °F |
Silicone Property; E1461-01 |
| Thermal Conductivity | 1.40 W/m-K @Temperature 100 °C |
9.72 BTU-in/hr-ft²-°F @Temperature 212 °F |
Silicone Property; ASTM E 1530 |
| Maximum Service Temperature, Air | 204.0 °C | 399.2 °F | |
| Minimum Service Temperature, Air | -100 °C | -148 °F | |
| Glass Transition Temp, Tg | -118 °C | -180 °F | Silicone Property; ASTM D3418 |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 6.9 @Frequency 1.00e+6 Hz |
6.9 @Frequency 1.00e+6 Hz |
D<sub>k</sub>, Silicone Property; IPC TM 650-2.5.5.3 |
| Dissipation Factor | 0.0044 @Frequency 1.00e+6 Hz |
0.0044 @Frequency 1.00e+6 Hz |
D<sub>f</sub>, Silicone Property; IPC TM 650-2.5.5.3 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 15.0 min @Pressure 0.101 - 0.345 MPa, Temperature 121.0 °C |
0.250 hour @Pressure 14.6 - 50.0 psi, Temperature 249.8 °F |
Recommended Cure Cycle |
| Shelf Life | 6.00 Month @Temperature 7.00 °C |
6.00 Month @Temperature 44.6 °F |
From date of manufacture |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Gray | |
| Plasticity | 2.3 mm | Arlon SQA-TMS-005 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved