Polymer Property : Density = 0.101 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	2.80 g/cc	0.101 lb/in³
Rogers Corporation RO3010 Ceramic-Filled PTFE Composite, High Frequency Circuit Material Features and Benefits:
Density	2.80 g/cc	0.101 lb/in³
Pyrotek Pyrocast ZEAL Refractory Shapes Aggregate Base: MulliteApplicationsDoor sill Furnace ramp Crucible bottom / lining Information provided by Pyrotek.
Density	2.80 g/cc	0.101 lb/in³
PEAK Werkstoff DISPAL S691 Aluminum Alloy, AlCu5Ti High stiffness and elongation at ruptureInformation provided by PEAK Werkstoff GmbH
Density	2.79 g/cc	0.101 lb/inÂ³	calculated from bulk density after subtracting pore volume
MarkeTech Repton EXP 36 Cordierite Mullite REPTON setter tiles, kiln furniture, and special fixtures are lightweight, ridge, and high strength ceramics that resist distortion and spalling, even when thermal cycled many times. They are availa..
Density	2.80 g/cc	0.101 lb/inÂ³	Apparent
Gouda Vuurvast AK 85 KM Dense Refractory Brick Description: This brick based on mullite and corundum, is characterized by a very low porosity, high slag resistance, low creep and very good thermal shock resistance.Remarks: This data represents a..
Density	2.80 g/cc	0.101 lb/inÂ³	Apparent
Gouda Vuurvast AK 86 A Dense Refractory Brick Description: This bauxite based brick has a high strength and good erosion resistance. Application in torpedo ladles for the steel industry and outlet zone rotary cement kilns.Remarks: This data rep..
Density	2.80 g/cc	0.101 lb/inÂ³
Schott GM39923 Dental Glass Remarks: Ba- and F-containing, low refractive glassApplication: CompositeAdvantagesGreater variety of composition and refractive indiciesOutstanding transparencyBest radiopacitiesInformation Provide..
Density	2.80 - 3.00 g/cc @Temperature 20.0 Â°C	0.101 - 0.108 lb/inÂ³ @Temperature 68.0 Â°F
Solvay Chemicals NOCOLOKÂ® Cs Flux Flux for brazing magnesium aluminum alloysHS No.: 38109090/CAS-No.: 60304-36-1 and 138577-01-2Uses: Automotive Sector, Commercial & Residential Air Conditioning, Refrigeration and Household & Elect..
Density	2.80 g/cc @Temperature 20.0 Â°C	0.101 lb/inÂ³ @Temperature 68.0 Â°F
Solvay Chemicals NOCOLOKÂ® Flux Drystatic Potassium Fluoroaluminate Flux using electrostatic/dry powder coating. Classifications: HS No.: 38109090 /CAS-No.: 60304-36-1Uses: Automotive Sector, Commercial & Residential Air Conditioning, Refrigeration and Household & ..
Density	2.80 g/cc @Temperature 20.0 Â°C	0.101 lb/inÂ³ @Temperature 68.0 Â°F
Solvay Chemicals NOCOLOKÂ® Flux Potassium Fluoroaluminate A high quality fluxing agent for brazing aluminum components. Classifications: HS No.: 38109090/CAS-No.: 60304-36-1Uses: Automotive Sector, Commercial & Residential Air Conditioning, Refrigeration ..
Density	2.80 - 3.00 g/cc @Temperature 20.0 Â°C	0.101 - 0.108 lb/inÂ³ @Temperature 68.0 Â°F
Solvay Chemicals NOCOLOKÂ® Li Flux Drystatic Flux for aluminum brazing with further reduced residue solubility and improved corrosion characteristics and using electrostatic/dry powder coating.HS No.: 38109090 /CAS-No.: 60304-36-1 and 13821-..
Density	2.80 g/cc	0.101 lb/in³	DIN EN 623-2 / ASTM-C373 / ASTM-C20
CeramTec Frequenta® Steatite Steatites used in place of aluminas are a cost-effective way to meet performance requirements. They are easier to form and fire at lower temperatures. Frequenta® has low dielectric loss, but has be..
Density	2.80 g/cc	0.101 lb/in³
Vista Metals Duramold-2™ Cast Aluminum Mold Plate Used for molds for the automotive industry, blow molds, structural foam molds, rubber molds, low pressure injection molds, Thermoforming molds, R.I.M. and R.T.M. molding.Features: Excellent Machinab..
Density	2.79 g/cc	0.101 lb/in³
Constellium Alumold® 400 Aluminum The Alumold®-400 alloy has been optimized to provide good shape stability and high strength properties throughout the plate thickness. Typical applications include blow moulds, thermoforming moulds..
Density	2.80 g/cc	0.101 lb/in³	ASTM C20
CoorsTek Mullite, S2 Thermal Shock Delta Tc = 300°C - Thermal shock tests are performed by quenching samples in water from different elevated temperatures. Delta Tc is the change in temperature which results in a shar..
Density	2.80 g/cc	0.101 lb/in³
COI Ceramics Nextel™ AS-N650 Oxide Ceramic Matrix Composite, Aluminosilicate Description: Oxide ceramic matrix composites products are based upon sol-gel derived matrices and 3M Corporation's Nextel™ fiber products. These materials can be used up to 1200ºC (2200ºF) in air..
Density	2.80 g/cc	0.101 lb/in³	ISO 1183
Azoty Tarnow™ TARFLEN SM-B30 PTFE Reinforced with 30% bronze for standard compression molding.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
Density	2.80 g/cc	0.101 lb/in³	Silicone Property; Arlon SQA-TMS-024
Arlon CP-594CX Bulk Compound Product Use: Electrically insulating electronic adhesive. Bonds without primer.Appearance: Gray, high viscosity gumUL94V-0: The product is designed to meet UL94V-0 flame resistance requirements but ..
Density	2.80 g/cc	0.101 lb/in³	Silicone Property; Arlon SQA-TMS-024
Arlon Thermabond® 48A43X008 0.008"(0.203 mm) Cured Silicone Rubber with Fiberglass Substrate Description: Thermabond® Electrically insulating, thermally conductive, thermal interface material (TIM).Design/Construction: Side 1: Cured Silicone RubberSubstrate: Style 1080 FiberglassSide 2: Cu..
Density	2.80 g/cc	0.101 lb/in³	Silicone Property; Arlon SQA-TMS-024
Arlon Thermabond® 48A51X015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate Description: Primerless Thermabond® Electrically insulating, thermally conductive, electronic adhesive. Bonds without primer.Design/Construction: Liner 1: Polyethylene Side 1: Uncured Silicone Rubb..
Density	2.80 g/cc	0.101 lb/in³	Silicone Property; ASTM D2240
Arlon Thermabond® 51A50X020 0.020" (0.508 mm) Uncured Silicone Rubber with Fiberglass Substrate Description: Thermabond® - Electrically insulating, thermally conductive, thermal interface material (TIM)Design/Construction: Liner: Polyethylene Side 1: Uncured Silicone RubberSubstrate: Style 76..
Density	2.80 g/cc	0.101 lb/in³	Silicone Property; Arlon SQA-TMS-024
Arlon Thermabond® R37623X008 0.0050" Cured Silicone Rubber with Fiberglass Substrate Thermabond®: Electrically insulating, thermally conductive, thermal interface material (TIM)Design/Construction:Side 1: Cured Silicone RubberSubstrate: 1080-style FiberglassSide 2: Cured Silico..
Density	2.80 g/cc	0.101 lb/in³
Alpase M-5™ Aluminum Mold Plate Excellent weldabilitySurface Condition - Machined top and bottom to reduce costly handling and machining stepsDimensional Stability - High dimensional stability during and after machiningPolishing -..
Density	2.80 g/cc	0.101 lb/in³
BASF Paliotol™ Yellow K 1700 Color Additive Type of Pigment: Azo pigment, Ca/Na Lake Recommendations for food applications: Germany and FranceApplications: LDPE, HDPE/PP, PVC-P, PVC-U, PS, ABSInformation provided by BASF
Density	2.80 g/cc	0.101 lb/in³
LATI Latimass 53/11-02 D030 PP Homopolymer, Impact Modified Specific density compound based on Polypropylene homopolymer (PPh), impact modified. Special filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation..
Density	2.80 g/cc	0.101 lb/in³	Silicone Property; Arlon SQA-TMS-024
Arlon R37480X008 0.008" (0.203 mm) Uncured Silicone Rubber with Substrate: PTFE Coated Fiberglass Substrate Description: Primerless Thermabond® electrically insulating, thermally conductive, electronic adhesive. Bonds without primer.Design/Construction: Liner: FEP Add-on: Uncured Silicone Rubber Substra..
Density	2.80 g/cc	0.101 lb/in³	Silicone Property; Arlon SQA-TMS-024
Arlon R37622X014 0.014" (0.356 mm) Cured Silicone Rubber Description: Thermabond® electrically insulating, thermally conductive, thermal interface material. Design/Construction: Liner: Polyethylene Product: Cured Silicone Rubber Carrier: PTFE Coated Fib..