Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Asahi Kasei Xyron® 240W Modified Polyphenylene Ether

Category Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polyphenylene Ether, Heat Resistant
Manufacturer Asahi Kasei
Trade Name Xyron®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Asahi Kasei Xyron® 240W Modified Polyphenylene Ether.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Flame RetardantInformation provided by Asahi Kasei
Physical Properties Metric English Comments
Specific Gravity 1.08 g/cc
1.08 g/cc
23°C; ASTM D792
Moisture Absorption 0.100 %
0.100 %
23°C, 50% RH 24 hours; ASTM D570
Linear Mold Shrinkage 0.0050 - 0.0070 cm/cm
0.0050 - 0.0070 in/in
ASTM D955
Mechanical Properties Metric English Comments
Tensile Strength, Yield 44.0 MPa
6380 psi
23°C, 50% RH; ASTM D638
Elongation at Break 40 %
40 %
23°C, 50% RH; ASTM D638
Flexural Strength 70.0 MPa
10200 psi
23°C, 50% RH; ASTM D790
Flexural Modulus 2.40 GPa
348 ksi
23°C, 50% RH; ASTM D790
Izod Impact, Notched 1.47 J/cm

@Thickness 6.40 mm,
Temperature 23.0 °C
2.75 ft-lb/in

@Thickness 0.252 in,
Temperature 73.4 °F
ASTM D256
1.96 J/cm

@Thickness 3.20 mm,
Temperature 23.0 °C
3.67 ft-lb/in

@Thickness 0.126 in,
Temperature 73.4 °F
ASTM D256
Thermal Properties Metric English Comments
CTE, linear 75.0 µm/m-°C

@Temperature -30.0 - 60.0 °C
41.7 µin/in-°F

@Temperature -22.0 - 140 °F
ASTM D696
Deflection Temperature at 1.8 MPa (264 psi) 90.0 °C
194 °F
ASTM D648
Flammability, UL94 V-2

@Thickness 1.60 mm
V-2

@Thickness 0.0630 in
V-2

@Thickness 3.20 mm
V-2

@Thickness 0.126 in
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+16 ohm-cm
1.00e+16 ohm-cm
50% RH; ASTM D257
Surface Resistance 1.00e+16 ohm
1.00e+16 ohm
50% RH; ASTM D257
Dielectric Constant 2.9

@Frequency 1e+6 Hz
2.9

@Frequency 1e+6 Hz
50% RH; ASTM D150
2.9

@Frequency 1e+6 Hz
2.9

@Frequency 1e+6 Hz
50% RH; ASTM D150
Dielectric Strength 29.0 kV/mm

@Thickness 2.00 mm
737 kV/in

@Thickness 0.0787 in
Short time; ASTM D149
Dissipation Factor 0.0030

@Frequency 60 Hz
0.0030

@Frequency 60 Hz
50% RH; ASTM D150
0.0040

@Frequency 1e+6 Hz
0.0040

@Frequency 1e+6 Hz
50% RH; ASTM D150
Arc Resistance 80 sec
80 sec
Tungsten; ASTM D495
Processing Properties Metric English Comments
Processing Temperature 220 - 270 °C
428 - 518 °F
Resin Temperature
Mold Temperature 40.0 - 70.0 °C
104 - 158 °F
Drying Temperature 80.0 - 90.0 °C
176 - 194 °F
Pre-drying Temperature
Dry Time 2 - 4 hour
2 - 4 hour
Copyright © lookpolymers.com All Rights Reserved