Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

DuPont Performance Polymers Minlon® EFE6096 GY090A Nylon 66  (Unverified Data**)

Category Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 20% Mineral Filled
Manufacturer DuPont Performance Polymers
Trade Name Minlon®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF DuPont Performance Polymers Minlon® EFE6096 GY090A Nylon 66  (Unverified Data**).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Minlon® EFE6096 GY090A is a 15% mineral reinforced impact modified nylon 66 resin.Information provided by DuPont Performance Polymers
Physical Properties Metric English Comments
Density 1.23 g/cc
0.0444 lb/in³
DAM; ISO 1183
Filler Content 15 %
15 %
DAM
Water Absorption 2.1 %

@Temperature 23.0 °C
2.1 %

@Temperature 73.4 °F
Equilibrium 50%RH; DAM; ISO 62, Similar to
7.7 %

@Temperature 23.0 °C
7.7 %

@Temperature 73.4 °F
Saturation, immersed; DAM; ISO 62, Similar to
Linear Mold Shrinkage, Flow 0.011 cm/cm

@Thickness 2.00 mm
0.011 in/in

@Thickness 0.0787 in
DAM; ISO 294-4
Linear Mold Shrinkage, Transverse 0.011 cm/cm

@Thickness 2.00 mm
0.011 in/in

@Thickness 0.0787 in
DAM; ISO 294-4
Mechanical Properties Metric English Comments
Tensile Strength at Break 52.0 MPa

@Temperature 23.0 °C
7540 psi

@Temperature 73.4 °F
50%RH; ISO 527
76.0 MPa

@Temperature 23.0 °C
11000 psi

@Temperature 73.4 °F
DAM; ISO 527
Tensile Strength 79.0 MPa

@Temperature 23.0 °C
11500 psi

@Temperature 73.4 °F
DAM; ASTM D638
Elongation at Break 17 %

@Temperature 23.0 °C
17 %

@Temperature 73.4 °F
DAM; ASTM D638
21 %

@Temperature 23.0 °C
21 %

@Temperature 73.4 °F
DAM; ISO 527
>= 50 %

@Temperature 23.0 °C
>= 50 %

@Temperature 73.4 °F
50%RH; ISO 527
52 %

@Temperature 23.0 °C
52 %

@Temperature 73.4 °F
50%RH; ISO 527
Tensile Modulus 1.80 GPa

@Temperature 23.0 °C
261 ksi

@Temperature 73.4 °F
50%RH; ISO 527
3.80 GPa

@Temperature 23.0 °C
551 ksi

@Temperature 73.4 °F
DAM; ISO 527
Flexural Modulus 3.72 GPa

@Temperature 23.0 °C
540 ksi

@Temperature 73.4 °F
DAM; ASTM D790
Izod Impact, Notched 0.640 J/cm

@Temperature 23.0 °C
1.20 ft-lb/in

@Temperature 73.4 °F
DAM; ASTM D256
Izod Impact, Notched (ISO) 6.00 kJ/m²

@Temperature 23.0 °C
2.86 ft-lb/in²

@Temperature 73.4 °F
DAM; ISO 180/1A
11.0 kJ/m²

@Temperature 23.0 °C
5.23 ft-lb/in²

@Temperature 73.4 °F
50%RH; ISO 180/1A
Charpy Impact Unnotched 0.600 J/cm²

@Temperature -30.0 °C
2.86 ft-lb/in²

@Temperature -22.0 °F
DAM; ISO 179/1eU
10.0 J/cm²

@Temperature 23.0 °C
47.6 ft-lb/in²

@Temperature 73.4 °F
DAM; ISO 179/1eU
NB

@Temperature 23.0 °C
NB

@Temperature 73.4 °F
50%RH; ISO 179/1eU
Charpy Impact, Notched 0.750 J/cm²

@Temperature 23.0 °C
3.57 ft-lb/in²

@Temperature 73.4 °F
DAM; ISO 179/1eA
1.50 J/cm²

@Temperature 23.0 °C
7.14 ft-lb/in²

@Temperature 73.4 °F
50%RH; ISO 179/1eA
Thermal Properties Metric English Comments
Melting Point 263 °C
505 °F
10°C/min; DAM; ISO 11357-1/-3
Deflection Temperature at 1.8 MPa (264 psi) 75.0 °C
167 °F
DAM; ISO 75-1/-2
Processing Properties Metric English Comments
Melt Temperature 285 - 305 °C
545 - 581 °F
DAM
295 °C
563 °F
DAM; Optimum
Mold Temperature 70.0 - 120 °C
158 - 248 °F
DAM
100 °C
212 °F
DAM; optimum
Drying Temperature 80.0 °C
176 °F
DAM
Dry Time 2.00 - 4.00 hour
2.00 - 4.00 hour
DAM
Moisture Content <= 0.20 %
<= 0.20 %
DAM
Descriptive Properties Value Comments
Drying Recommended Yes, if moisture content of resin exceeds recommended level
DAM
Filler Mineral filler
DAM
Forms Pellets
DAM
Generic Nylon 66
DAM
Heat Stabilized Yes
DAM
Material Status Current
DAM
Part Marking Code >PA66-IMD15<
ISO 11469; DAM
Polymer Family Polyamide
DAM
Polymer Type PA66
DAM
Processing Method Injection Molding
DAM
Product Category Low Warp Resins
DAM
Mineral Reinforced Resins
DAM
Resin Identification PA66-IMD15
ISO 1043; DAM
RoHS Compliance Contact Manufacturer
DAM
Copyright © lookpolymers.com All Rights Reserved