- HOME
- POLYMER SEARCH
- Thermoset
- Polyester, TS
- Thermoset Polyester Glass Filled BMC
- Glastic Laminates/Shapes MTS Grade MTS Fiberglass-Reinforced Polyester Rod
Glastic Laminates/Shapes MTS Grade MTS Fiberglass-Reinforced Polyester Rod
| Category | Polymer , Thermoset , Filled/Reinforced Thermoset , Polyester, TS , Thermoset Polyester Glass Filled BMC |
| Manufacturer | Glastic |
| Trade Name | Laminates/Shapes |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Glastic Laminates/Shapes MTS Grade MTS Fiberglass-Reinforced Polyester Rod.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Data provided by Glastic Corporation.A continuous-filament fiberglass-roving provides superior strength.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792 |
| Water Absorption | 0.25 % | 0.25 % | ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 345 MPa | 50000 psi | ASTM D638 |
| Tensile Modulus | 14.0 GPa | 2030 ksi | ASTM D638 |
| Flexural Strength | 552 MPa | 80100 psi | ASTM D790 |
| Flexural Modulus | 21.0 GPa | 3050 ksi | ASTM D790 |
| Compressive Strength | 97.0 MPa | 14100 psi | Transverse; ASTM D695 |
| 276 MPa | 40000 psi | Axial; ASTM D695 | |
| Shear Strength | 14.0 MPa | 2030 psi | In-plane. ASTM D3914 |
| Izod Impact, Notched | 21.4 J/cm | 40.1 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 6.00 µm/m-°C @Temperature 20.0 °C |
3.33 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Thermal Conductivity | 0.290 W/m-K | 2.01 BTU-in/hr-ft²-°F | ASTM C177 |
| Maximum Service Temperature, Air | 155 °C | 311 °F | |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | 8.30e+13 ohm | 8.30e+13 ohm | Insulation Resistance, ASTM D257 |
| Dielectric Constant | 5.0 @Frequency 60 Hz |
5.0 @Frequency 60 Hz |
ASTM D150 |
| Dielectric Strength | 3.00 kV/mm | 76.2 kV/in | 1 in. axial in oil; ASTM D149 |
| Arc Resistance | 130 sec | 130 sec | ASTM D495 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Lexan® 910A PC (Europe-Africa-Middle East)
- Multibase Multi-Flex® D 4003 Black TPE Thermoplastic Elastomer
- Wellman Wellamid® GF20-60 XE-N 20% Glass Fiber Reinforced Nylon 6, Lubricated & Heat Stabilized
- A. Schulman SCHULAMID® 66 GF50H 50% Glass Fiber Reinforced, Heat Stabilized 66
- Formosa Plastics Formolene® 6535N Impact Copolymer Polypropylene
- Elgiloy® Co-Cr-Ni Alloy, Strip, 85% Cold Reduction
- A. Schulman SCHULAMID® 66 GF30H 30% Glass Fiber Reinforced, Heat Stabilized Nylon 66
- Huntsman PE2062 Injection Molding Polyethylene (discontinued **)
Copyright © lookpolymers.com All Rights Reserved