- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- Epoxy, High Temperature
- Aremco Aremco-Bond™ 2335 Ultra High Temperature Epoxy
Aremco Aremco-Bond™ 2335 Ultra High Temperature Epoxy
| Category | Polymer , Adhesive , Thermoset , Epoxy , Epoxy, High Temperature |
| Manufacturer | Aremco |
| Trade Name | Aremco-Bond™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Aremco-Bond™ 2335 Ultra High Temperature Epoxy.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Ceramic-Filled, Low Expansion, High Lap-Shear Strength & Chemical Resistance, Low Outgassing.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.80 g/cc | 0.0650 lb/in³ | |
| Linear Mold Shrinkage | 0.00310 cm/cm | 0.00310 in/in | cure shrinkage |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 90.0 | 90.0 | |
| Flexural Strength | 93.8 MPa | 13600 psi | |
| Shear Strength | 13.8 MPa | 2000 psi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 25.2 µm/m-°C | 14.0 µin/in-°F | |
| Maximum Service Temperature, Air | 300 °C | 572 °F | |
| Minimum Service Temperature, Air | -55.0 °C | -67.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 2.00e+15 ohm-cm | 2.00e+15 ohm-cm | |
| Dielectric Constant | 4.80 @Frequency 1000 Hz |
4.80 @Frequency 1000 Hz |
|
| Dielectric Strength | 17.7 kV/mm | 450 kV/in | |
| Dissipation Factor | 0.000700 | 0.000700 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 min @Temperature 93.3 °C |
2.00 hour @Temperature 200 °F |
Step 1 of recommended 2 step cure |
| 120 min @Temperature 177 °C |
2.00 hour @Temperature 350 °F |
Step 2 of recommended 2 step cure | |
| 480 min @Temperature 149 °C |
8.00 hour @Temperature 300 °F |
Alternate | |
| Pot Life | 90.0 min @Temperature 25.0 °C |
90.0 min @Temperature 77.0 °F |
100 g mass |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Chemical Resistance | Excellent | |
| Color | Beige | |
| Mix Ratio By Weight | 100:5.5 | resin:hardener |
| Viscosity | Paste |
Users viewing this material also viewed the following:
- Intercontinental Polymers HoPET 737 HoPET Polymer Type - Bright, Polyester Pellets
- Karina E 800-35/1-B-ERB Ivory PVC Compound
- Spartech Royalite R84/21 Weather Resistant Sheet
- SPHERE ONE EXTENDOSPHERESâ„¢ SLG Hollow Spheres
- Sibur DSSK-2545-M27 Oil-Filled Styrene-Butadiene Rubber
- Solvay TECHNYL® A 118L V50 PA66, 50% glass fiber, Eh 0
- Chosun Refractories HRD-SNE Plate Brick
- Carpenter MP35N* Ni-Co-Cr-Mo Alloy, 55% Cold Reduction
Copyright © lookpolymers.com All Rights Reserved