LNP Thermocomp® JF-1006 Polyethersulfone, Glass Fiber Reinforcement (discontinued **)

Category	Polymer , Thermoplastic , Polyethersulfone (PES)
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LNP Thermocomp® JF-1006 Polyethersulfone, Glass Fiber Reinforcement (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Forms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names instituted after the SABIC purchase.

Physical Properties	Metric	English	Comments
Specific Gravity	1.58 g/cc	1.58 g/cc	Method A; ASTM D792
Water Absorption	0.30 %	0.30 %	at 24 hrs; ASTM D570
Linear Mold Shrinkage	0.0030 cm/cm	0.0030 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0050 cm/cm	0.0050 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	143 MPa	20700 psi	ASTM D638
Tensile Strength, Yield	143 MPa	20700 psi	ASTM D638
Elongation at Break	2.2 %	2.2 %	ASTM D638
Elongation at Yield	2.2 %	2.2 %	ASTM D638
Tensile Modulus	10.8 GPa	1570 ksi	ASTM D638
Flexural Strength	207 MPa	30000 psi	ASTM D790
Flexural Modulus	9.72 GPa	1410 ksi	ASTM D790
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180
Izod Impact, Unnotched (ISO)	40.0 kJ/m²	19.0 ft-lb/in²	ISO 180
Falling Dart Impact	10.7 J	7.89 ft-lb	ASTM D3763
Impact Test	4.16 J	3.07 ft-lb	Multi-Axial Instrumented Impact Energy; ISO 6603-2
Coefficient of Friction, Dynamic	0.52	0.52	vs. Steel - @ 40 psi, 50 ft/min, tested in accordance with LNP WI-0687; ASTM D1894
Coefficient of Friction, Static	0.57	0.57	vs. Steel @ 40 psi, tested in accordance with LNP WI-0687; ASTM D1894
K (wear) Factor	342 x 10^-8 mm³/N-M	170 x 10^-10 in³-min/ft-lb-hr	40psi, 50ft/min; tested in accordance with LNP WI-0687

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	210 °C	410 °F	Unannealed; ASTM D648

Processing Properties	Metric	English	Comments
Melt Temperature	354 - 371 °C	669 - 700 °F
Mold Temperature	135 - 149 °C	275 - 300 °F
Drying Temperature	121 - 149 °C	250 - 300 °F
Dry Time	4 hour	4 hour
Moisture Content	0.050 %	0.050 %	Suggested
Back Pressure	0.345 - 0.689 MPa	50.0 - 99.9 psi

Users viewing this material also viewed the following: