PolyOne OnFlex™ BIO 5380A-E0006 Thermoplastic Elastomer (TPE)

Category	Polymer , Renewable/Recycled Polymer , Thermoplastic , Elastomer, TPE
Manufacturer	PolyOne Corporation
Trade Name	OnFlex™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyOne OnFlex™ BIO 5380A-E0006 Thermoplastic Elastomer (TPE).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

OnFlex™ BIO 5300 series thermoplastic elastomer compounds are soft thermoplastic polyurethane compounds made from renewable natural sources. These compounds contain at least 20% of renewable material as certified according to ASTM-D6866. The OnFlex™ BIO 5300 series compounds are formulated to provide an excellent surface finish, soft-touch haptic, abrasion resistance and mechanical properties.Properties are measured using injection molded plaques.Information provided by PolyOne

Physical Properties	Metric	English	Comments
Density	1.07 g/cc	0.0387 lb/in³	ISO 1183

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	80	80	ISO 868
Tensile Strength at Break	19.8 MPa @Thickness 2.00 mm, Temperature 23.0 °C	2870 psi @Thickness 0.0787 in, Temperature 73.4 °F	Type 1, 200 mm/min; Flow; DIN 53504
	20.0 MPa @Thickness 2.00 mm, Temperature 23.0 °C	2900 psi @Thickness 0.0787 in, Temperature 73.4 °F	Type 1, 200 mm/min Across Flow; DIN 53504
Tensile Stress	4.40 MPa @Strain 100 %, Thickness 2.00 mm	638 psi @Strain 100 %, Thickness 0.0787 in	Type 1, 200 mm/min Across Flow; DIN 53504
	4.50 MPa @Strain 100 %, Thickness 2.00 mm	653 psi @Strain 100 %, Thickness 0.0787 in	Type 1, 200 mm/min; Flow; DIN 53504
	10.0 MPa @Strain 300 %, Thickness 2.00 mm	1450 psi @Strain 300 %, Thickness 0.0787 in	Type 1, 200 mm/min Across Flow; DIN 53504
	10.2 MPa @Strain 300 %, Thickness 2.00 mm	1480 psi @Strain 300 %, Thickness 0.0787 in	Type 1, 200 mm/min; Flow; DIN 53504
Elongation at Break	500 % @Thickness 2.00 mm, Temperature 23.0 °C	500 % @Thickness 0.0787 in, Temperature 73.4 °F	Type 1, 200 mm/min; Flow; DIN 53504
	520 % @Thickness 2.00 mm, Temperature 23.0 °C	520 % @Thickness 0.0787 in, Temperature 73.4 °F	Type 1, 200 mm/min Across Flow; DIN 53504
Tear Strength	64.0 kN/m @Thickness 2.00 mm, Temperature 23.0 °C	365 pli @Thickness 0.0787 in, Temperature 73.4 °F	Method A, Trouser; Across Flow; ISO 34-1
	64.0 kN/m @Thickness 2.00 mm, Temperature 23.0 °C	365 pli @Thickness 0.0787 in, Temperature 73.4 °F	Method A, Trouser; Flow; ISO 34-1
Abrasion	38	38	[mm³]; DIN 53516
Compression Set	47 % @Temperature 23.0 °C, Time 259000 sec	47 % @Temperature 73.4 °F, Time 72.0 hour	ISO 815
	71 % @Temperature 70.0 °C, Time 79200 sec	71 % @Temperature 158 °F, Time 22.0 hour	ISO 815
	84 % @Temperature 100 °C, Time 79200 sec	84 % @Temperature 212 °F, Time 22.0 hour	ISO 815

Processing Properties	Metric	English
Melt Temperature	180 - 220 °C	356 - 428 °F
Mold Temperature	30.0 - 60.0 °C	86.0 - 140 °F
Drying Temperature	100 - 120 °C	212 - 248 °F
Dry Time	1.00 - 2.00 hour	1.00 - 2.00 hour

Descriptive Properties	Value	Comments
Features	Good Abrasion Resistance
	Renewable Resource Content
	Scratch Resistant
Forms	Pellets
Generic Material	TPE
Generic Name	Thermoplastic Elastomer (TPE)
Injection Rate	Fast
Manufacturer / Supplier	GLS Thermoplastic Elastomers
Odor rating	3.2	VDA 270; Method A3
Processing Method	Calendering
	Extrusion
	Injection Molding
	Multi Injection Molding
Regional Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
RoHS Compliance	RoHS Compliant
Uses	Automotive Applications
	Consumer Applications
	General Purpose

Users viewing this material also viewed the following: