Quadrant EPP Nylatron® NSM PA 6 + internal lubricant, cast (ISO Data)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Cast
Manufacturer	Quadrant Engineering Plastics Products
Trade Name	Nylatron®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Quadrant EPP Nylatron® NSM PA 6 + internal lubricant, cast (ISO Data).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Nylatron NSM is a proprietary cast nylon 6 formulation containing solid lubricant additives which grant this materials self-lubricity, excellent frictional behaviour, superior wear resistance and outstanding pressure-velocity capabilities (up to 5 times higher than conventional cast nylons). Being particularly suited for higher velocity, unlubricated moving parts applications, it is the perfect complement to the oil-filled grade Ertalon LFX High mechanical strength, stiffness, hardness and toughness Good fatigue resistance High mechanical damping ability Good sliding properties Excellent wear resistance Good electrical insulating properties Good resistance to high energy radiation (gamma- and X-rays) Good machinability

Physical Properties	Metric	English	Comments
Density	1.14 g/cc	0.0412 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	2.0 %	2.0 %	50% RH
Water Absorption at Saturation	6.3 %	6.3 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	81	81	ISO 2039-2
Hardness, Shore D	76	76
Ball Indentation Hardness	150 MPa	21800 psi	ISO 2039-1
Tensile Strength	80.0 MPa	11600 psi	at Yield; ISO 527-1/-2
Elongation at Break	25 %	25 %	ISO 527-1/-2
Elongation at Yield	5.0 %	5.0 %	ISO 527-1/-2
Tensile Modulus	3.15 GPa	457 ksi	ISO 527-1/-2
Flexural Strength	109 MPa	15800 psi
Flexural Modulus	2.80 GPa	406 ksi
Compressive Strength	31.0 MPa @Strain 1 %	4500 psi @Strain 1 %	ISO 604
	59.0 MPa @Strain 2 %	8560 psi @Strain 2 %	ISO 604
	87.0 MPa @Strain 5 %	12600 psi @Strain 5 %	ISO 604
K Factor (ISO)	4.5 µm/km	4.5 µm/km
Charpy Impact Unnotched	7.50 J/cm²	35.7 ft-lb/in²	ISO 179-1/1eU
Charpy Impact, Notched	0.350 J/cm²	1.67 ft-lb/in²	ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.20 - 0.35	0.20 - 0.35
Limiting Pressure Velocity	0.250 MPa-m/sec	7140 psi-ft/min	at 1 m/s unlubricated
	0.390 MPa-m/sec	11100 psi-ft/min	at 0.1 m/s unlubricated

Thermal Properties	Metric	English	Comments
CTE, linear	95.0 µm/m-°C @Temperature 23.0 - 100 °C	52.8 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.290 W/m-K	2.01 BTU-in/hr-ft²-°F
Melting Point	215 °C	419 °F	DSC, 10°C/min.; ISO 11357-1/-3
Maximum Service Temperature, Air	90.0 °C	194 °F	Continuous; 20,000 h
	105 °C	221 °F	Continuous; 5,000 h
Deflection Temperature at 1.8 MPa (264 psi)	75.0 °C	167 °F	ISO 75-1/-2
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.0e+14 ohm-cm	>= 1.0e+14 ohm-cm	IEC 60093
Surface Resistivity per Square	>= 1.0e+13 ohm	>= 1.0e+13 ohm	IEC 60093
Dielectric Constant	3.6 @Frequency >=100000 Hz	3.6 @Frequency >=100000 Hz	IEC 60250
Dielectric Strength	25.0 kV/mm	635 kV/in
Dissipation Factor	0.012 @Frequency 100000 Hz	0.012 @Frequency 100000 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Compliance Properties	Metric	English
3A-Dairy	No	No
European Food 1935/2004	No	No
FDA	No	No
USP Class VI	No	No

Chemical Resistance Properties	Metric	English
Acids, Strong (pH 1-3)	Unacceptable	Unacceptable
Acids, Weak	Limited	Limited
Alcohols	Limited	Limited
Alkalies, Strong (pH 11-14)	Unacceptable	Unacceptable
Alkalies, Weak	Limited	Limited
Chlorinated Solvents	Limited	Limited
Continuous Sunlight	Limited	Limited
Hot Water / Steam	Limited	Limited
Hydrocarbons - Aliphatic	Acceptable	Acceptable
Hydrocarbons - Aromatic	Acceptable	Acceptable
Inorganic Salt Solutions	Acceptable	Acceptable
Ketones, Esters	Acceptable	Acceptable

Users viewing this material also viewed the following: