SABIC Innovative Plastics LNP LUBRICOMP LL004C PEEK

Category	Polymer , Thermoplastic , Polyketone , Polyetheretherketone (PEEK)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP LUBRICOMP
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP LUBRICOMP LL004C PEEK.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

LNP* LUBRICOMP* LL004C is a compound based on Polyetheretherketone resin containing 20% PTFE. Added features of this material include: Wear Resistant, Clean Compounding System.

Physical Properties	Metric	English	Comments
Density	1.37 g/cc	0.0495 lb/inÂ³	ASTM D792
	1.37 g/cc	0.0495 lb/inÂ³	ISO 1183
Moisture Absorption	0.0600 %	0.0600 %	50% RH, 24 hrs; ASTM D570
Linear Mold Shrinkage, Flow	0.013 cm/cm @Time 86400 sec	0.013 in/in @Time 24.0 hour	ASTM D955
	0.013 cm/cm @Time 86400 sec	0.013 in/in @Time 24.0 hour	ISO 294
Linear Mold Shrinkage, Transverse	0.0185 cm/cm @Time 86400 sec	0.0185 in/in @Time 24.0 hour	ISO 294
	0.019 cm/cm @Time 86400 sec	0.019 in/in @Time 24.0 hour	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	69.0 MPa	10000 psi	ASTM D638
	69.0 MPa	10000 psi	ISO 527
Tensile Strength, Yield	73.0 MPa	10600 psi	ISO 527
	74.0 MPa	10700 psi	ASTM D638
Elongation at Break	11.8 %	11.8 %	ISO 527
	23.3 %	23.3 %	ASTM D638
Elongation at Yield	5.0 %	5.0 %	ISO 527
	5.8 %	5.8 %	ASTM D638
Tensile Modulus	2.89 GPa	419 ksi	50 mm/min; ASTM D638
	3.06 GPa	444 ksi	1 mm/min; ISO 527
Flexural Strength	117 MPa	17000 psi	ASTM D790
	118 MPa	17100 psi	ISO 178
Flexural Modulus	2.96 GPa	429 ksi	ASTM D790
	3.32 GPa	482 ksi	ISO 178
Izod Impact, Notched	0.960 J/cm	1.80 ft-lb/in	ASTM D256
Izod Impact, Unnotched	15.48 J/cm	29.00 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	8.00 kJ/mÂ²	3.81 ft-lb/inÂ²	80104; ISO 180/1A
Izod Impact, Unnotched (ISO)	91.0 kJ/mÂ²	43.3 ft-lb/inÂ²	80104; ISO 180/1U
Dart Drop, Total Energy	3.00 J	2.21 ft-lb	Instrumented Impact Energy @ peak; ASTM D3763
Impact Test	1.00 J	0.738 ft-lb	Multiaxial Impact; ISO 6603
Coefficient of Friction, Dynamic	0.52	0.52	ASTM D3702 Modified
Coefficient of Friction, Static	0.43	0.43	ASTM D3702 Modified
K (wear) Factor	258 x 10^-8 mmÂ³/N-M	128 x 10^-10 inÂ³-min/ft-lb-hr	Washer; ASTM D3702 Modified

Users viewing this material also viewed the following: