POLYMER SEARCH

Raschig Group 3535 Epoxy

Category	Polymer , Thermoset , Epoxy , Epoxy, Molded, Glass Fiber Filler , Filled/Reinforced Thermoset
Manufacturer	Raschig Group
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Raschig Group 3535 Epoxy.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Glass fiber-reinforced epoxy molding compound. Good mechanical strength, very good electrical isolation properties adn dimensional stability even at high temperatures. Form: Low dust granulate packed in moisture resistant cartons, Standard carton size: 25 kg palletized in 750 kg loads. Processing: Compression/Transfer/Injection. Applications: Connectors, Thermocouples, Sensors, Resistors, Potentiometers.Information provided by the Raschig Group

Physical Properties	Metric	English	Comments
Specific Gravity	1.90 - 2.10 g/cc	1.90 - 2.10 g/cc	ISO 1183
Apparent Bulk Density	0.850 - 1.00 g/cc	0.0307 - 0.0361 lb/in³	ISO 60
Water Absorption	<= 0.10 % @Temperature 23.0 °C, Time 86400 sec	<= 0.10 % @Temperature 73.4 °F, Time 24.0 hour	ISO 62
Linear Mold Shrinkage	0.0030 - 0.0050 cm/cm	0.0030 - 0.0050 in/in	(longitudinal) Injection and Compression; ISO 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	60.0 - 70.0 MPa	8700 - 10200 psi	Injection and Compression; ISO 527
Modulus of Elasticity	15.0 - 18.0 GPa	2180 - 2610 ksi	Injection and Compression; ISO 527
Flexural Strength	120 - 140 MPa	17400 - 20300 psi	Injection and Compression; ISO 178
Flexural Modulus	14.0 - 16.0 GPa	2030 - 2320 ksi	Injection and Compression; ISO 178
Compressive Strength	150 - 200 MPa	21800 - 29000 psi	ISO 604
Charpy Impact Unnotched	0.800 - 1.20 J/cm² @Temperature 23.0 °C	3.81 - 5.71 ft-lb/in² @Temperature 73.4 °F	Injection and Compression; ISO 179/ 1eU
Charpy Impact, Notched	0.250 - 0.350 J/cm² @Temperature 23.0 °C	1.19 - 1.67 ft-lb/in² @Temperature 73.4 °F	Injection and Compression; ISO 179/ 1eA

Thermal Properties	Metric	English	Comments
CTE, linear	15.0 - 20.0 µm/m-°C @Temperature 50.0 - 150 °C	8.33 - 11.1 µin/in-°F @Temperature 122 - 302 °F	ISO 11359-2
Thermal Conductivity	0.600 - 0.800 W/m-K	4.16 - 5.55 BTU-in/hr-ft²-°F	ASTM E1461
Deflection Temperature at 1.8 MPa (264 psi)	>= 200 °C	>= 392 °F	Injection; ISO 75-A
Deflection Temperature at 8.0 MPa	170 - 190 °C	338 - 374 °F	Injection; ISO 75-C
Flammability, UL94	V-0 @Thickness 5.70 mm	V-0 @Thickness 0.224 in
Shrinkage	<= 0.050 % @Temperature 110 °C, Time 605000 sec	<= 0.050 % @Temperature 230 °F, Time 168 hour	Post-shrinkage; ISO 2577

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 - 1.00e+16 ohm-cm	1.00e+15 - 1.00e+16 ohm-cm	IEC 60093
Surface Resistance	1.00e+14 - 1.00e+15 ohm	1.00e+14 - 1.00e+15 ohm	IEC 60093
Dielectric Constant	4.0 - 6.0 @Frequency 1.00e+6 Hz	4.0 - 6.0 @Frequency 1.00e+6 Hz	IEC 60250
	5.0 - 7.0 @Frequency 100 Hz	5.0 - 7.0 @Frequency 100 Hz	IEC 60250
Dielectric Strength	0.984 - 1.38 kV/mm	25.0 - 35.0 kV/in	IEC 60243-1
	15.0 - 20.0 kV/mm @Thickness 1.00 mm	381 - 508 kV/in @Thickness 0.0394 in	IEC 60243-1
Dissipation Factor	0.010 - 0.030 @Frequency 100 Hz	0.010 - 0.030 @Frequency 100 Hz	IEC 60250
	0.010 - 0.030 @Frequency 1.00e+6 Hz	0.010 - 0.030 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	>= 250 V	>= 250 V	CTI; IEC 60112

Processing Properties	Metric	English	Comments
Shelf Life	6.00 Month @Temperature 15.0 - 25.0 °C	6.00 Month @Temperature 59.0 - 77.0 °F

Descriptive Properties	Value	Comments
Arc Resistance	4 Stufe	ASTM D495
Glow wire flammability test	900/1	IEC 60695 2-12
Glow wire ignitability test	900/1	IEC 60695 2-13
Water Absorption	<10 mg	ISO 62; 24h / 23°C

Users viewing this material also viewed the following: