- HOME
- POLYMER SEARCH
- Polymer Property : Melt Temperature = 280 °C
Polymer Property : Melt Temperature = 280 °C Product List
Processing PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 260 - 280 °C | 500 - 536 °F | |
| Plastcom PLASTAMID® 6 BT B 27 PA6 Basic type PA 6 for compounding, for general use. Grade can contain PA 66 up to 5% and TiO2 content up to 0.25 %. Use: automotive, engineering, electrical and consumer-goods industryInformation Prov.. |
|||
| Melt Temperature | 250 - 280 °C | 482 - 536 °F | |
| Plastcom PLASTAMID® 6 GF 20 002 PA6 reinforced with glass fiber PA 6 for injection molding, reinforced with 20% glass fiber, for moldings used in the automotive, electrical, building, engineering and hobby industry - holders of electric hand tools, hobby tools, .. |
|||
| Melt Temperature | 250 - 280 °C | 482 - 536 °F | |
| Plastcom SLOVAMID 6 GF 33 PA6, 33% glass fibre FeaturesPA 6 for injection moulding, chemically strengthened with 33% of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-good.. |
|||
| Melt Temperature | 250 - 280 °C | 482 - 536 °F | |
| Plastcom SLOVAMID 6 SGF 30 Polyamide 6, 30% Milled Glass Fiber FeaturesPA 6 for injection moulding, chemically strengthened with 30% of milled glass fiber, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consum.. |
|||
| Melt Temperature | 240 - 280 °C | 464 - 536 °F | |
| Polykemi AB POLYblend 45FS GK25 PC/ABS-Blend, Glass Fiber reinforced Information provided by Polykemi AB |
|||
| Melt Temperature | 240 - 280 °C | 464 - 536 °F | Do not melt above 300°C |
| Nilit Nilamid B3 H ZC Unfilled, Low Temperature Impact Resistant PA6 Description: Nilamid B3 H ZC has outstanding impact performance, even at minus temperatures. It is widely used for components subjected to high shock loads. Applications include bicycle components, .. |
|||
| Melt Temperature | 260 - 280 °C | 500 - 536 °F | |
| Eastman Eastalloy DA106 PC+PET Copolyester/Polycarbonate
(discontinued **) ISO data as provided by the manufacturer, Eastman Chemical |
|||
| Melt Temperature | 124 - 280 °C | 255 - 536 °F | Average value: 207 °C Grade Count:57 |
| Overview of materials for High Density Polyethylene (HDPE), Film Grade This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Film Grade". Each property range of values reported is minimum and max.. |
|||
| Melt Temperature | 260 - 280 °C | 500 - 536 °F | DAM |
| DuPont Performance Polymers Zytel® 7331J NC010 Nylon 6
(Unverified Data**) Zytel® 7331J NC010 is lubricated fast cycling PA6 resin for injection molding.Information provided by DuPont Performance Polymers |
|||
| Melt Temperature | 260 - 280 °C | 500 - 536 °F | Injection Molding |
| LG Chemical LUMID GN1001BF PA66, Halogen Free Flame Retardant Feature: Injection Molding, PA66, Halogen Free Flame RetardantApplication: ConnectorsCAS No. 32131-17-2, 25038-54-4 and 37640-57-6Information provided by LG Chemical |
|||
| Melt Temperature | 250 - 280 °C | 482 - 536 °F | Injection Molding |
| LG Chemical LUMID HI1102A(W) PA6, High Impact Feature: Injection Molding, PA6, High ImpactApplication: H/Lamp Screw MountingCAS No. 25038-54-4 and 9010-79-1Information provided by LG Chemical |
|||
| Melt Temperature | 260 - 280 °C | 500 - 536 °F | |
| LG Chemical Lupox® PBT-HI1002FM Impact Modified, Flame Retardant PBT Information provided by US distributor Polymer Technology and Services, LLC (PTS). |
|||
| Melt Temperature | 240 - 280 °C | 464 - 536 °F | Injection Molding |
| Styrolution Luran® S 797 S UV White 33999 Q455 ASA Description: Grade with especially high notched impact strengthApplications: Lighting covers and lawn mower housings.Information provided by STYROLUTION, which is a joint venture between BASF and IN.. |
|||
| Melt Temperature | 240 - 280 °C | 464 - 536 °F | Injection Molding |
| Styrolution Luran® S 797 S White 35962 ASA Description: Grade with especially high notched impact strengthApplications: Lighting covers and lawn mower housings.Information provided by STYROLUTION, which is a joint venture between BASF and IN.. |
|||
| Melt Temperature | 240 - 280 °C | 464 - 536 °F | |
| Styron EMERGEâ„¢ 7560 Polycarbonate (PC) / Acrylonitrile Butadiene Styrene (ABS) EMERGEâ„¢ PC/ABS 7560 advanced resin is an ignition-resistant PC/ABS blend that contains no chlorine or bromine additives. This resin is suitable for use in a wide variety of applications in the.. |
|||
| Melt Temperature | 230 - 280 °C | 446 - 536 °F | |
| Eastman DuraStar DS1910HF Polymer, Natural Durastar DS1910HF polymer is a high flow grade of Durastar that contains a mold release. Durastar DS1910HF flow lengths are increased 20-40% relative to Durastar DS1010 as shown by spiral flow testi.. |
|||
| Melt Temperature | 230 - 280 °C | 446 - 536 °F | |
| Eastman Eastar AN001 Copolyester, Natural Eastar AN001 Copolyester has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. Exposure to aromatic oils often ca.. |
|||
| Melt Temperature | 250 - 280 °C | 482 - 536 °F | |
| CP-Polymer-Technik Wellamid® 6000 GV 35 HWCP 35% Glass Fiber Nylon 6, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG |
|||
| Melt Temperature | 250 - 280 °C | 482 - 536 °F | |
| CP-Polymer-Technik Wellamid® 6000/58 GV 15 HWUVCP 15% Glass Fiber Nylon 6, Impact Modified Until -40°C, UV Stabilized, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG |
|||
| Melt Temperature | 260 - 280 °C | 500 - 536 °F | |
| CP-Polymer-Technik Wellamid® 6600/508 HWUVCP Nylon 66, Impact Modified, UV Stabilized, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG |
|||
| Melt Temperature | 270 - 280 °C | 518 - 536 °F | |
| Eurostar Star L PA66 30Y D61 PA66, Carbon Fiber Filled, Injection Molded Star L PA66 30Y D51 is a PTFE/Silicone Oil Lubricated, Carbon Fiber Reinforced, Polyamide 66 Injection Molding ResinInformation provided by Eurostar. |
|||
| Melt Temperature | 270 - 280 °C | 518 - 536 °F | |
| Eurostar Star L PA66 D91 PA66, Aramid Fiber Filled, Injection Molded Star L PA66 D91 is a PTFE lubricated, Aramid Fiber Reinforced, Polyamide 66 Injection Molding ResinInformation provided by Eurostar. |
|||
| Melt Temperature | 265 - 280 °C | 509 - 536 °F | |
| Eurostar Starflam AFR200Y PA66, Flame Retardant, Injection Molding Staramide AFR200Y is an Unfilled, Halogen Free and Red Phosphorous Free, Flame Retardant Polyamide 66, Injection Molding ResinInformation provided by Eurostar. |
|||
| Melt Temperature | 250 - 280 °C | 482 - 536 °F | |
| CP-Polymer-Technik Wellamid® 6000 GV 30 HWCP 30% Glass Fiber Nylon 6, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG |
|||
| Melt Temperature | 265 - 280 °C | 509 - 536 °F | |
| Eurostar Starflam R10002E PA66/6, Injection Molded Starflam R10002E is a Unfilled, Halogen Free and Red Phosphorous Free, Flame Retardant, Polyamide 66/Polyamide 6 Injection Molding Resin (also known as R1000Z220EM)Information provided by Polymer Te.. |
|||
| Melt Temperature | 230 - 280 °C | 446 - 536 °F | Coating |
| BASF Ultradur B 4500 PBT Ultradur B4500 is a general-purpose injection molding grade for high-precision, high-toughness, and dimensionally stable engineering parts. It conforms to FDA requirements of 21 CFR 177.1660. |
|||
| Melt Temperature | 260 - 280 °C | 500 - 536 °F | |
| Toyobo GLAMIDE® T-401 Nylon-6 GLAMIDE® is very tough and exhibits high abrasion resistance. It has a high melting point and heat resistance, has well-balanced proportions of mechanical properties, performs self-distinguishing a.. |
|||
| Melt Temperature | 260 - 280 °C | 500 - 536 °F | |
| A. Schulman VOLOY™ 462 Hybrid Reinforced PBT Alloy Information provided by A. Schulman. |
|||
| Melt Temperature | 266 - 280 °C | 511 - 536 °F | ISO 294 |
| Gromax CFG30-SN31N1 Nylon 6 30% Glass Filled (Dry) Information provided by Gromax Enterprises Corp. |
|||
Copyright © lookpolymers.com All Rights Reserved