Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

BASF Ultraform® N2200 G43 POM

Category Polymer , Thermoplastic , Acetal (POM)
Manufacturer BASF
Trade Name Ultraform®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF BASF Ultraform® N2200 G43 POM.pdf
Price EMAIL US    sales@lookpolymers.com
Material Notes:
Description: Is a POM, injection-molding grade for parts requiring high stiffness and strength together with good mold release.Information provided by BASF
Physical Properties Metric English Comments
Density 1.54 g/cc
0.0556 lb/in³
ISO 1183
Water Absorption 0.90 %
0.90 %
Saturation; ISO 62
Moisture Absorption at Equilibrium 0.15 %
0.15 %
23°C; 50% RH; ISO 62
Linear Mold Shrinkage, Flow 0.010 cm/cm
0.010 in/in
ISO 2577
Linear Mold Shrinkage, Transverse 0.016 cm/cm
0.016 in/in
ISO 2577
Melt Flow 6.622 g/10 min

@Load 2.16 kg,
Temperature 190 °C
 6.622 g/10 min

@Load 4.76 lb,
Temperature 374 °F
 ISO 1133
Mechanical Properties Metric English Comments
Ball Indentation Hardness 164 MPa

@Load 36.5 kg,
Time 30.0 sec
 23800 psi

@Load 80.5 lb,
Time 0.00833 hour
 ISO 2039-1
Tensile Strength at Break 115 MPa
16700 psi
5 mm/min; ISO 527-2
Elongation at Break 3.0 %
3.0 %
ISO 527-2
Modulus of Elasticity 7.30 GPa
1060 ksi
ISO 527-2
Izod Impact, Notched (ISO) 5.00 kJ/m²

@Temperature -30.0 °C
 2.38 ft-lb/in²

@Temperature -22.0 °F
 ISO 180/A
5.00 kJ/m²

@Temperature 23.0 °C
 2.38 ft-lb/in²

@Temperature 73.4 °F
 ISO 180/A
Charpy Impact Unnotched 5.00 J/cm²

@Temperature -30.0 °C
 23.8 ft-lb/in²

@Temperature -22.0 °F
 ISO 179/1eU
5.00 J/cm²

@Temperature 23.0 °C
 23.8 ft-lb/in²

@Temperature 73.4 °F
 ISO 179/1eU
Charpy Impact, Notched 0.650 J/cm²

@Temperature -30.0 °C
 3.09 ft-lb/in²

@Temperature -22.0 °F
 ISO 179/1eA
0.750 J/cm²

@Temperature 23.0 °C
 3.57 ft-lb/in²

@Temperature 73.4 °F
 ISO 179/1eA
Tensile Creep Modulus, 1000 hours 4500 MPa
653000 psi
ISO 899-1
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 50.0 µm/m-°C

@Temperature 23.0 - 55.0 °C
 27.8 µin/in-°F

@Temperature 73.4 - 131 °F
 DIN 53752
Melting Point 170 °C
338 °F
DIN 53765
Maximum Service Temperature, Air 110 °C
230 °F
Deflection Temperature at 1.8 MPa (264 psi) 161 °C
322 °F
ISO 75-2
Vicat Softening Point 160 °C
320 °F
ISO 306
Flammability, UL94 HB

@Thickness 1.60 mm
 HB

@Thickness 0.0630 in
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+12 ohm-cm
1.00e+12 ohm-cm
IEC 60093
Surface Resistance 1.00e+14 ohm
1.00e+14 ohm
IEC 60093
Dielectric Constant 4.0

@Frequency 100 Hz
 4.0

@Frequency 100 Hz
 IEC 60250
4.1

@Frequency 1.00e+6 Hz
 4.1

@Frequency 1.00e+6 Hz
 IEC 60250
Dielectric Strength 43.0 kV/mm
1090 kV/in
IEC 60243-1
Dissipation Factor 0.0040

@Frequency 100 Hz
 0.0040

@Frequency 100 Hz
 IEC 60250
0.0070

@Frequency 1.00e+6 Hz
 0.0070

@Frequency 1.00e+6 Hz
 IEC 60250
Comparative Tracking Index 600 V
600 V
Test solution A; IEC 60112
600 V
600 V
Test solution B; IEC 60112
Processing Properties Metric English Comments
Processing Temperature 200 °C
392 °F
Hopper Throat
Zone 1 205 °C
401 °F
Feed zone
Zone 2 205 °C
401 °F
Compression
Zone 3 210 °C
410 °F
Metering-zone
Zone 4 210 °C
410 °F
Nozzle
Melt Temperature 190 - 230 °C
374 - 446 °F
Injection-molding
210 °C
410 °F
Optimal
Mold Temperature 60.0 - 120 °C
140 - 248 °F
Injection-molding
100 °C
212 °F
Optimal
Drying Temperature 100 °C
212 °F
Dry Time 3 hour
3 hour
Descriptive Properties Value Comments
Commercial Status Europe
Peripheral screw speed <0.3 m/s
Primary Processing Technique Injection Molding
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved