BASF Ultramid® FRee A3U40G5 25% Glass Filled PA66 FR (Conditioned)

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled
Manufacturer	BASF
Trade Name	Ultramid®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® FRee A3U40G5 25% Glass Filled PA66 FR (Conditioned).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Description: Flame retardant without halogens and red phosphorus, 25% glass fiber reinforced injection-molding grade; light colorable; outstanding mechanical and electrical properties.Information provided by BASF

Physical Properties	Metric	English	Comments
Density	1.42 g/cc	0.0513 lb/in³	ISO 1183
Water Absorption	4.0 - 4.6 %	4.0 - 4.6 %	Saturation; ISO 62
Moisture Absorption at Equilibrium	1.1 - 1.5 %	1.1 - 1.5 %	23°C; 50% RH; ISO 62
Linear Mold Shrinkage	0.0040 cm/cm	0.0040 in/in	restricted
Melt Flow	42.6 g/10 min @Load 5.00 kg, Temperature 275 °C	42.6 g/10 min @Load 11.0 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	140 MPa	20300 psi	50 mm/min; ISO 527-1/-2
Elongation at Yield	3.8 %	3.8 %	50 mm/min; ISO 527-1/-2
Modulus of Elasticity	7.40 GPa	1070 ksi	ISO 527-1/-2
Flexural Strength	160 MPa	23200 psi	at max force; ISO 178
Flexural Modulus	7.40 GPa	1070 ksi	ISO 178
Izod Impact, Notched (ISO)	9.00 kJ/m² @Temperature 23.0 °C	4.28 ft-lb/in² @Temperature 73.4 °F	ISO 180/A
Charpy Impact Unnotched	6.00 J/cm² @Temperature 23.0 °C	28.6 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.700 J/cm² @Temperature 23.0 °C	3.33 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
Melting Point	260 °C	500 °F	DIN 53765

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+11 ohm-cm	1.00e+11 ohm-cm	IEC 60093
Surface Resistance	1.00e+15 ohm	1.00e+15 ohm	IEC 60093
Dielectric Constant	4.6 @Frequency 1.00 Hz	4.6 @Frequency 1.00 Hz	IEC 60250
Dissipation Factor	0.10 @Frequency 1.00e+6 Hz	0.10 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	Test solution A; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	280 - 300 °C	536 - 572 °F	Injection-molding/Extrusion
Mold Temperature	80.0 - 90.0 °C	176 - 194 °F	Injection-molding

Descriptive Properties	Value	Comments
Commercial Status	Europe

Users viewing this material also viewed the following: