Premix Thermoplastics PRE-ELEC® PE 1292

Category	Polymer , Film , Thermoplastic , Polyethylene (PE) , HDPE
Manufacturer	Premix Thermoplastics Inc.
Trade Name	PRE-ELEC®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Premix Thermoplastics PRE-ELEC® PE 1292.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

PRE-ELEC PE 1292 is a conductive thermoplastic compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC PE 1292 has an excellent balance of mechanical properties and is easy to extrude. PRE-ELEC PE 1292 can also be blow molded.Typical applications include extrusion of pipe and sheet which can be welded or vacuum formed without pre-drying.Information provided by Premix Thermoplastics Inc.

Physical Properties	Metric	English	Comments
Density	1.03 g/cc	0.0372 lb/in³
Thickness	406 microns	16.0 mil
Linear Mold Shrinkage	0.015 - 0.025 cm/cm @Thickness 4.00 mm	0.015 - 0.025 in/in @Thickness 0.157 in	10.0 mm wide molded rod; ISO 294-4
Melt Flow	1.5 g/10 min @Load 5.00 kg, Temperature 190 °C	1.5 g/10 min @Load 11.0 lb, Temperature 374 °F	ISO 1133
	6.0 g/10 min @Load 10.0 kg, Temperature 190 °C	6.0 g/10 min @Load 22.0 lb, Temperature 374 °F	ISO 1133
High Load Melt Index	35 g/10 min @Load 21.6 kg, Temperature 190 °C	35 g/10 min @Load 47.6 lb, Temperature 374 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	31.0 MPa	4500 psi	ISO 527
Film Elongation at Break, MD	70 %	70 %	ISO 527
Film Elongation at Yield, MD	12 %	12 %	ISO 527
Modulus of Elasticity	1.10 GPa @Thickness 4.00 mm	160 ksi @Thickness 0.157 in	10.0 mm wide molded rod; ISO 178
Izod Impact, Notched	0.500 J/cm @Thickness 4.00 mm, Temperature -20.0 °C	0.937 ft-lb/in @Thickness 0.157 in, Temperature -4.00 °F	ISO 180
	0.850 J/cm @Thickness 4.00 mm, Temperature 23.0 °C	1.59 ft-lb/in @Thickness 0.157 in, Temperature 73.4 °F	ISO 180
Izod Impact, Unnotched	NB @Thickness 4.00 mm, Temperature 23.0 °C	NB @Thickness 0.157 in, Temperature 73.4 °F	ISO 180
	NB @Thickness 4.00 mm, Temperature -20.0 °C	NB @Thickness 0.157 in, Temperature -4.00 °F	ISO 180
Film Tensile Strength at Break, MD	17.0 MPa	2470 psi	ISO 527

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	84.0 °C @Thickness 4.00 mm	183 °F @Thickness 0.157 in	10.0 mm wide molded rod; ISO 75/Method Bf
Vicat Softening Point	128 °C @Thickness 4.00 mm	262 °F @Thickness 0.157 in	Rate A; 10.0 mm wide molded rod; ISO 306/A50

Electrical Properties	Metric	English	Comments
Volume Resistivity	<= 10000 ohm-cm	<= 10000 ohm-cm	400 um thick sheet; ISO D-257
Surface Resistance	<= 1e+05	<= 1e+05	400 um thick sheet; ISO D-257

Processing Properties	Metric	English	Comments
Middle Barrel Temperature	200 °C	392 °F	Zone 1; Cylinder
	210 °C	410 °F	Zone 2; Cylinder
	220 °C	428 °F	Zone 3; Cylinder
	220 °C	428 °F	Zone 4; Cylinder
	230 °C	446 °F	Zone 5; Cylinder
	230 °C	446 °F	Zone 6; Cylinder
Die Temperature	220 °C	428 °F	Zone 3
	230 °C	446 °F	Zone 2
	230 °C	446 °F	Zone 4
	240 °C	464 °F	Zone 5
	240 °C	464 °F	Zone 1
Melt Temperature	200 - 250 °C	392 - 482 °F
Mold Temperature	40.0 - 60.0 °C	104 - 140 °F
Roll Temperature	50.0 °C	122 °F	3rd Roll
	60.0 °C	140 °F	2nd Roll
	70.0 °C	158 °F	1st Roll
Drying Temperature	80.0 °C @Time 7200 - 14400 sec	176 °F @Time 2.00 - 4.00 hour	Pre-drying in a dehumidifier
Moisture Content	<= 0.15 %	<= 0.15 %	When Produced
Injection Pressure	60.0 - 80.0 MPa	8700 - 11600 psi
Shelf Life	12.0 Month	12.0 Month	Normal Storing Conditions

Descriptive Properties	Value	Comments
Appearance	Granule
Color	Black
Injection Speed	Moderate

Users viewing this material also viewed the following: