Polymer Property : Density = 0.0361 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	1.00 g/cc	0.0361 lb/in³	ASTM D792
Mytex Polymers AS20LW Polypropylene, Talc filled, Compounded Description: Talc filled compounded polypropylene produced for automotive interior applications using Mytex® Technology. Material offers good balance of stiffness and impact properties.Key Applica..
Density	1.00 g/cc	0.0361 lb/in³	ISO 1183
PolyOne OnFlex™ HT 40A-3S2131 Thermoplastic Elastomer (TPE) OnFlex™ HT thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds is specially formulated to deliver very good compression set performance at..
Density	1.00 g/cc	0.0361 lb/in³	ISO 1183
Polykemi AB POLYfill PP CPQ10015 FF Polypropylene, Mineral Reinforced Information provided by Polykemi AB
Density	1.00 g/cc	0.0361 lb/in³	uncured
Permabond TA435 Toughened Acrylic Adhesive & Initiator PERMABOND TA435 is a structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics and some thermoplastics. This adhesive may be used in a variety of structural bonding appli..
Density	1.00 g/cc	0.0361 lb/in³	ASTM D792B
Dow INSPIRE™ TF1302 TPO (discontinued **) Medium Flow, High Impact, Filled TPOInformation provided by DowThe Inspire brand was spun off from Dow Chemical to Styron in 2010, although this grade had previously been removed from Dow's standard..
Density	1.00 g/cc	0.0361 lb/inÂ³	ISO 1183
LyondellBasell Hifaxâ„¢ CB276 Thermoplastic Polyolefin Elastomer Description: Hifaxâ„¢ CB276 very high melt flow, 1,200 MPa flexural modulus, UV-stabilized, precolored, mineral-filled thermoplastic elastomeric olefin (TEO) resin has a very good combination of ..
Density	1.00 g/cc	0.0361 lb/inÂ³
Solvay ALKAMULSÂ® A Surfactant Identification: ETHOXYLATED OLEIC ACIDCAS: 9004 â€“ 96 â€“ 0Available in: Asia Pacific, Europe, Latin America and North America Solubility: Dispersible in water. Soluble in most polar and arom..
Density	1.00 g/cc	0.0361 lb/inÂ³
Solvay ANTAROXÂ® V 27 Surfactant Description: Linear Alcohol EO/PO.Identification: ETHO-PROPOXYLATED FATTY ALCOHOLCAS: 68603 - 25 â€“ 8Solubility: Soluble in water and most polar and aromatic solvents.Available in: Asia Pacific,..
Density	1.00 g/cc	0.0361 lb/inÂ³
Solvay MACKADETÂ® DR-100M Surfactant Product Description: MackadetÂ® DR-100M is a concentrated blend of surfactants, which simply requires dilution and the addition of minor additives to produce a ready to package high foaming produc..
Density	1.00 - 1.10 g/cc	0.0361 - 0.0397 lb/inÂ³
Solvay MIRACAREÂ® SLB-205/N Surfactant Description: Miracare SLB-205/N is a free flowing, high active surfactant concentrate used in the preparation of structured liquids. It is a surfactant base used to stabilize additives applied in a ..
Density	1.00 g/cc	0.0361 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP THERMOCOMP M7001XXH PP LNP* THERMOCOMP* M7001XXH is a compound based on Polypropylene resin containing proprietary antimicrobial additves. Designed for touch surfaces in patient critical healthcare applications. Added f..
Density	>= 1.00 g/cc	>= 0.0361 lb/inÂ³
Solvay SIPOMERÂ® SEM 25 Polyalkoxyl Polyarylphenol Ethylenic Methacrylate Description: Specialty monomer for Rheology modificationChemical Name: POLYALKOXYL POLYARYLPHENOL ETHYLENIC METHACRYLATECAS: 79-41-4Available in: Asia Pacific, Europe, Latin America and North Americ..
Density	1.00 g/cc	0.0361 lb/in³	ASTM D792
UBE PAE1200U2 Electronic Grade Nylon Elastomer Description: UBESTA Nylon 12 has an excellent termite resistance than other plastics. UBESTA contributes as a material for jacket and sheath which lay for telephone and telegram Communication System..
Density	1.00 g/cc	0.0361 lb/in³	ASTM D792
UBE UBESTA® 3030JI44 Plasticized Industrial Grade Nylon 12 Description: UBE UBESTA® Industrial grade Nylon 12Comments: ultra flexible, low migrationInformation provided by UBE.
Density	1.00 g/cc	0.0361 lb/in³
Dow Corning SYL-OFF® PMCPSL 6 Crosslinker Minimizes mist at speeds up to 1600 m/min, good balance of cure and anchorage performance.Information provided by Dow Corning
Density	1.00 g/cc	0.0361 lb/in³	ISO 1183
EMS-Grivory Grivory® L 20A Z PA12 Product Description: Grilamid L 20A Z is a medium viscosity product, based on Polyamide 12 (PA12). Grilamid L 20A Z is impact modified, hydrolysis-and heat stabilized. Grilamid L 20A Z is used for p..
Density	1.00 g/cc	0.0361 lb/in³	ASTM D792, ISO 1183
DuPont™ Elvaloy® 741WR Ethylene/Vinyl Acetate/Carbon Monoxide (E/VA/CO) Copolymer DuPont™ Elvaloy® 741WR an ethylene/vinyl acetate/carbon monoxide (E/VA/CO) copolymer. The difference between Elvaloy®741 and Elvaloy®741WR, is that Elvaloy®741WR contains a wax additive to dete..
Density	1.00 g/cc	0.0361 lb/in³	ISO 1183
EMS-Grivory Grivory® L 25 W 40 NZ PA12-I Product Description: Grilamid L 25 W 40 NZ is a flexible, plasticized, high viscosity extrusion grade of Polyamide 12 (PA12). Grilamid L 25 W 40 NZ is impact modified and heat and UV stabilized. The..
Density	1.00 g/cc	0.0361 lb/in³	ISO 1183
Arkema Group Pebax® 2533 SA 01 Polyether Block Amide (PEBA) Polyether block amide PEBAX® 2533 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is specially designed to food uses.Information provided by Arkema ..
Density	1.00 g/cc	0.0361 lb/in³	ISO 1183
Arkema Group Pebax® 2533 SD 02 Polyether Block Amide (PEBA) Polyether block amide PEBAX® 2533 SD 02 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SD grade is heat and UV stabilized and contains mold release additive.Infor..
Density	1.00 g/cc	0.0361 lb/in³
Arkema Group Rilsan® BMV 400 TL Nylon 11 (Dry) Designation ISO 1874-PA11,M,18-002,ZFlexible grade for injection molding. Available color: natural. Light and heat stabilized. Plasticizing agent free.Outstanding impact strength and tear spreading ..
Density	1.00 g/cc @Temperature 40.0 °C	0.0361 lb/in³ @Temperature 104 °F
BASF Diisopropanolamine S Formula: C6H15NO2CAS: 110-97-4Description: Diisopropanolamine S is a colorless to yellow solid or melt with an amine-like odor. It is fully soluble in water.Synonyms: DIPA, 1,1’-Iminobis[2-propano..
Density	>= 1.00 g/cc	>= 0.0361 lb/in³
BASF Styropor® P 340 EPS Description: Expandable polystyrene (EPS) containing nominal 4.3 wt% pentane as the blowing agent.Intended uses: General purpose shape molding applications with fast molding cycles: Protective packa..
Density	1.00 g/cc	0.0361 lb/in³	ASTM D792
Techmer ES Statiblend® PP FR BK Availability: North AmericaForms: PelletsFeature: Flame Retardant, Homopolymer and Semi ConductiveUL File Number: E157318Information provided by TP Composites, Inc.
Density	1.00 g/cc	0.0361 lb/in³	ISO 1183
Polykemi AB POLYfill PP HJ752 UV2 Polypropylene/Elastomer, Mineral Reinforced Information provided by Polykemi AB
Density	1.00 - 1.51 g/cc	0.0361 - 0.0546 lb/in³	Average value: 1.22 g/cc Grade Count:44
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), Stainless Steel Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS), Stainless Steel Fiber Filled". Each property range of values repo..
Density	1.00 g/cc	0.0361 lb/in³	Base Elastomer
Nitrile Rubber (NBR, Acrylonitrile-Butadiene Rubber) Nitrile Rubbers are copolymers of butadiene and acrylonitrile. The term has also been applied to copolymers of other dienes and/or nitriles. Acrylonitrile content may range from 18-50%. Increasin..
Density	1.00 g/cc	0.0361 lb/in³
Arkema Group Orgalloy® P 60AD Nylon (Conditioned) ISO data provided by the manufacturer, Arkema.
Density	1.00 - 1.51 g/cc	0.0361 - 0.0546 lb/in³	Average value: 1.14 g/cc Grade Count:288
Overview of materials for Polypropylene with 30% Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 30% Glass Fiber Filler". Specific grades with glass content between 25% and 34% are i..