Polymer Property : Density = 0.0466 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183-1
Quadrant EPP Ertalon® 66 GF30 PA 66, 30% glass filled, extruded (ISO Data) Compared with virgin PA 66, this 30 % glass fibre reinforced and heat stabilised nylon grade offers increased strength, stiffness, creep resistance and dimensional stability whilst retaining an exce..
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
SABIC Innovative Plastics LNP Faradex DS0036IP PC (Asia Pacific) LNP* Faradex* DS0036IP is a compound based on Polycarbonate resin containing Stainless Steel. Added features of this material include: Electrically Conductive, EMI/RFI Shielding, High Impact, Non-B..
Density	1.29 - 3.70 g/cc	0.0466 - 0.134 lb/in³	Average value: 1.70 g/cc Grade Count:18
Overview of materials for Polyphenylene Sulfide (PPS), Conductive This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS), Conductive". Each property range of values reported is minimum and maximum ..
Density	1.29 - 1.61 g/cc	0.0466 - 0.0582 lb/in³	Average value: 1.46 g/cc Grade Count:65
Overview of materials for Nylon 6, 40% Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, 40% Mineral Filled". Each property range of values reported is minimum and maximum values of ap..
Density	1.29 g/cc	0.0466 lb/inÂ³	ASTM D792
Global GAB-130 30% Glass Reinforced, General Purpose ABS Information provided by Global Polymers Corporation.
Density	1.29 g/cc	0.0466 lb/inÂ³	ISO 1183
SABIC Innovative Plastics LNP LUBRICOMP DL003E PC (Asia Pacific) LNP LUBRICOMP* DL003E is a compound based on Polycarbonate resin containing PTFE. Added features of this material include: Easy Molding.
Density	1.29 g/cc	0.0466 lb/inÂ³	ISO 1183
SABIC Innovative Plastics LNP LUBRICOMP DL003EU PC LNP LUBRICOMP* DL003EU is a compound based on Polycarbonate resin containing 15% PTFE. Added features of this material include: Easy Molding, UV Stabilized, Internally Lubricated.
Density	1.29 g/cc	0.0466 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP LUBRICOMP DX98306H PC LNP* LUBRICOMP* DX98306H is a compound based on Polycarbonate resin containing Proprietary Fillers. Added features of this material include: Wear Resistant, Low Extractible.
Density	1.29 g/cc	0.0466 lb/inÂ³	ISO 1183
SABIC Innovative Plastics NORYL SE1GFN3 PPE+HIPS (Europe-Africa-Middle East) Noryl* SE1GFN3 is a 30% glass reinforced, injection moldable modified polyphenylene ether resin. Designed for improved dimensional stability and good flow , this resin also uses non-chlorinated, non..
Density	1.29 g/cc	0.0466 lb/inÂ³	ASTM D 792
SABIC Innovative Plastics LNP Lubricomp ZFL24 PPO LNP* Lubricomp* ZFL24 is a compound based on Modified Polyphenylene Oxide (PPO) containing glass fiber and PTFE lubricant. Characteristics of this grade are: Internally Lubricated.This data was su..
Density	1.29 g/cc	0.0466 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP STAT-KON AX06518 ABS (Asia Pacific) LNP* Stat-kon* AX06518 is a compound based on Acrylonitrile Butadiene Styrene resin containing Flame Retardant, Stainless Steel. Added features of this material include: Electrically Conductive, Fl..
Density	1.29 g/cc	0.0466 lb/inÂ³	ASTM D792
Solvay Specialty Polymers RadelÂ® R-5600 Polyphenylsulfone (PPSU) RadelÂ® R-5600 is a very high melt flow grade of RadelÂ® polyphenylsulfone (PPSU). It is especially well-suited for parts requiring long flow length with thin walls. RadelÂ® resins offer excep..
Density	1.29 g/cc	0.0466 lb/inÂ³	ISO 1183
SABIC Innovative Plastics LNP THERMOCOMP IX04513C PA 6/12 (Asia Pacific) LNP THERMOCOMP* IX04513C is a compound based on Nylon 6/12 resin containing Glass Fiber. Added features of this material include: Clean Compounding System.
Density	1.29 g/cc	0.0466 lb/inÂ³	ISO 1183
SABIC Innovative Plastics Noryl CRX2201 PPE+HIPS Noryl* CRX2201 resin is a 25% mineral reinforced, injection moldable modified polyphenylene ether resin designed for improved chemical resistance when compared with standard Noryl resins. Noryl CRX..
Density	1.29 g/cc	0.0466 lb/inÂ³	ASTM D792
Teknor Apex SarlinkÂ® 4390 Thermoplastic Elastomer A highly engineered thermoplastic elastomer for use in demanding applications. SarlinkÂ® 4390 is a flame retardant, high hardness grade processing exceptional chemical resistance, compression set ..
Density	1.29 g/cc	0.0466 lb/in³	ASTM D792
Toyobo PELPRENE™ S9002 Polyester TPE, Ultra Heat-resistant Features: Polyester TPE, Ultra Heat-resistantInformation provided by Toyobo.
Density	1.29 g/cc	0.0466 lb/in³	Cured
Hexcel® HexPly® 914 175°C Curing Epoxy Matrix HexPly® 914 is a highly successful modified epoxy matrix which is used extensively in high temperature resistant primary aircraft structures. The controlled melt viscosity and excellent matrix rheo..
Density	1.29 g/cc	0.0466 lb/in³	Cured resin
Hexcel® HexPly® M14 248°F (120°C) Curing Epoxy Matrix HexPly® M14 is a modified epoxy resin which provides good adhesion to honeycomb and foam cores. Its self-extinguishing characteristics meet the fire, smoke, and toxicity requirements of aerospace a..
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
Chengdu Polyster H9275Y Thermoplastic Polyether-ester Elastomer (TPEE) High modulus molding and injection grade. Contains improved color- stable antioxidants. Excellent heat-ageing resistance and toughness. Applications requiring high strength, high toughness and good ..
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
Covestro Makrolon® 1095 Polycarbonate, 15% Glass Filled ISO 7391-PC,MR,(,,)-09-9,GF15Global gradeMVR (300 °C/1.2 kg) 6.0 cm3/10 min15 % Glass fiber reinforcedHigh viscosityEasy releaseInjection molding - Melt temperature 310 - 330 °CExtrusionAvailable ..
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
CP-Polymer-Technik Wellamid® 6000 GS 20 HWCP 20% Glass Sphere Filled Nylon 6, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
CP-Polymer-Technik Wellamid® 6000 GV 20 HWCP 20% Glass Fiber Nylon 6, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Density	1.29 - 1.35 g/cc	0.0466 - 0.0488 lb/in³
Dow BETAMATE™ 1045 Epoxy BETAMATE™ 1045 is a one component, epoxy based adhesive especially developed for the body shop. The product has the following properties: Good rheology performance (Wash-out resistant, excellent..
Density	1.29 g/cc	0.0466 lb/in³	DAM; ISO 1183
DuPont Performance Polymers Zytel® 70G20HSL NC010 Nylon 66 Information provided by DuPont Performance Polymers
Density	1.29 g/cc	0.0466 lb/in³
Arkema Group Nakan® FKJ 905 R PVC, Soft Extrusion Grade NAKAN FKJ 905 R is a soft polyvinyl chloride compound developed for high speed Telecom insulation.ISO data provided by the manufacturer, Arkema.
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
Teijin Panlite® B-8120R Carbon Fiber Reinforced Polycarbonate Resin CF 20% reinforced grade, meeting UL 94 V-2. It has excellent strength, stiffness, heat resistance and electric conductivity. Other features are low molding shrinkage and dimensional accuracy.Applica..
Density	1.29 g/cc	0.0466 lb/in³	(DAM); ISO 1183
DSM Stanyl® TW200F3 Nylon 46-15% Glass Reinforced (European Grade) (Cond) Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper..
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183/A
Addiplast Addinyl C2 V20 Nylon 66/6, 20% Glass Filled Glass fiber reinforced, high strengthInformation provided by Addiplast.
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
Eurotec® Tecomid® NB40 GR30 NL IH PA 6 30% glass fiber reinforced, impact modified Excellent stiffness/toughness balanceHigh mechanical strengthVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance and low frictionVery good..