POLYMER SEARCH

EMS-Grivory Grivory® G4V-5H nat PA*-GF50

Category	Polymer , Thermoplastic , Nylon
Manufacturer	EMS-Grivory (EMS-CHEMIE)
Trade Name	Grivory®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EMS-Grivory Grivory® G4V-5H nat PA*-GF50.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Product description: Grivory G4V-5H is a 50% glass fiber reinforced engineering thermoplastic material based on a semi-crystalline partially aromatic copolyamide. Grivory G4V-5H is used for injection molding technical parts, exhibiting exceptional characteristics even after moisture absorption: high stiffness and strengthdimensional stability, low warpagegood chemical resistancegood surface finish Grivory G4V-5H is the economical alternative to die-cast alloys. It is suitable for production of technical parts in the application fields of:Electro / ElectronicsAutomotiveMechanical engineeringDomestic appliancesInformation provided by EMS Grivory

Physical Properties	Metric	English	Comments
Density	1.59 g/cc	0.0574 lb/in³	ISO 1183
Water Absorption	4.0 %	4.0 %	ISO 62
Moisture Absorption	1.40 %	1.40 %	ISO 62
Linear Mold Shrinkage, Flow	0.0010 cm/cm	0.0010 in/in	ISO 294-4, 2577
Linear Mold Shrinkage, Transverse	0.0040 cm/cm	0.0040 in/in	ISO 294-4, 2577

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	275 MPa	39900 psi	conditioned; ISO 2039-1
	290 MPa	42100 psi	dry; ISO 2039-1
Tensile Strength at Break	200 MPa	29000 psi	conditioned; ISO 527-1/-2
	240 MPa	34800 psi	dry; ISO 527-1/-2
Elongation at Break	2.0 %	2.0 %	dry; ISO 527-1/-2
	2.5 %	2.5 %	conditioned; ISO 527-1/-2
Tensile Modulus	16.5 GPa	2390 ksi	conditioned; ISO 527-1/-2
	16.5 GPa	2390 ksi	dry; ISO 527-1/-2
Charpy Impact Unnotched	8.00 J/cm²	38.1 ft-lb/in²	dry; ISO 179/1eU
	8.00 J/cm²	38.1 ft-lb/in²	conditioned; ISO 179/1eU
	5.00 J/cm² @Temperature 30.0 °C	23.8 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU
	6.00 J/cm² @Temperature 30.0 °C	28.6 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
Charpy Impact, Notched	1.40 J/cm²	6.66 ft-lb/in²	conditioned; ISO 179/1eA
	1.50 J/cm²	7.14 ft-lb/in²	dry; ISO 179/1eA
	1.40 J/cm² @Temperature 30.0 °C	6.66 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU
	1.50 J/cm² @Temperature 30.0 °C	7.14 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	10.0 µm/m-°C	5.56 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	60.0 µm/m-°C	33.3 µin/in-°F	ISO 11359-1/-2
Melting Point	235 °C	455 °F	10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air	140 °C	284 °F	long term; EMS
	220 °C	428 °F	short term; EMS
Deflection Temperature at 1.8 MPa (264 psi)	215 °C	419 °F	ISO 75-1/-2
Deflection Temperature at 8.0 MPa	165 °C	329 °F	ISO 75-1/-2
Flammability, UL94	HB	HB	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	dry; IEC 60093
	1.00e+13 ohm-cm	1.00e+13 ohm-cm	conditioned; IEC 60093
Surface Resistance	1.00e+12 ohm	1.00e+12 ohm	IEC 60093
Dielectric Strength	35.0 kV/mm	889 kV/in	dry; IEC 60243-1
	35.0 kV/mm	889 kV/in	conditioned; IEC 60243-1
Comparative Tracking Index	600 V	600 V	conditioned; IEC 60112

Descriptive Properties	Value	Comments
Automotive	Air intake sytems
	Automotive electr. and electronics, lighting
	Compressed air systems
	Cooling and climate control
	Exterior
	Fuel systems
Electricals & Electronics	Electrical equipment
	Energy distribution
	Lighting
Form	Granules
Processing	Injection Molding
Product Attributes	Barrier Properties
	Co Polyamide
	High viscosity
	Long Fiber Reinforced
	Masterbatch
	Nucleated
	Transparent Polyamide

Users viewing this material also viewed the following: