Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

EMS-Grivory Grivory® XE 5106 (GVL-4H V0) PA*-GF40

Category Polymer , Thermoplastic , Nylon
Manufacturer EMS-Grivory (EMS-CHEMIE)
Trade Name Grivory®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF EMS-Grivory Grivory® XE 5106 (GVL-4H V0) PA*-GF40.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Product description: Grivory XE 5106 black 9915 is based on a combination of a heat stabilized semi-crystalline Polyamide with a partially aromatic Polyamide. The product is flame retarded and reinforced by 40% long glass fibers. Grivory XE 5106 black 9915 is characterized by the following key-properties:flame retardancy of V-0 and 5VA at 1.6 mmGlow wire ignition > 800°C, CTI 600 Vvery high stiffness and strength even after conditioning and over a wide temperature rangeexcellent notched impact resistance also at low temperaturesvery low creephigh heat distortion temperatureslow moisture absorptionvery good dimensional stability and little warpageGrivory XE 5106 is halogen free and does not contain red phosphorus. It complies with the regulations acc. RoHS (2002/95/EC) and is not affected by the guideline 2002/96/EC (WEEE) for Electro-Appliances. The product has been designed for injection molding of technical parts especially in the area of flame retardant parts with no electrostatic charging possible Grivory XE 5106 (GVL-4H V0) black 9915 is used in the following market segments:automotivemechanical engineeringelectro-mechanical partsThe glass fibers are aligned in parallel and are just as long as the pellets (usually 10 mm).Information provided by EMS Grivory
Physical Properties Metric English Comments
Density 1.50 g/cc
0.0542 lb/in³
ISO 1183
Water Absorption 4.1 %
4.1 %
ISO 62
Moisture Absorption 1.10 %
1.10 %
ISO 62
Linear Mold Shrinkage, Flow 0.0010 cm/cm
0.0010 in/in
ISO 294-4, 2577
Linear Mold Shrinkage, Transverse 0.0030 cm/cm
0.0030 in/in
ISO 294-4, 2577
Mechanical Properties Metric English Comments
Ball Indentation Hardness 250 MPa
36300 psi
conditioned; ISO 2039-1
265 MPa
38400 psi
dry; ISO 2039-1
Tensile Strength at Break 175 MPa
25400 psi
conditioned; ISO 527-1/-2
200 MPa
29000 psi
dry; ISO 527-1/-2
Elongation at Break 2.1 %
2.1 %
dry; ISO 527-1/-2
2.4 %
2.4 %
conditioned; ISO 527-1/-2
Tensile Modulus 13.0 GPa
1890 ksi
conditioned; ISO 527-1/-2
14.5 GPa
2100 ksi
dry; ISO 527-1/-2
Charpy Impact Unnotched 6.50 J/cm²
30.9 ft-lb/in²
conditioned; ISO 179/1eU
7.00 J/cm²
33.3 ft-lb/in²
dry; ISO 179/1eU
7.00 J/cm²

@Temperature 30.0 °C
33.3 ft-lb/in²

@Temperature 86.0 °F
dry; ISO 179/1eU
7.00 J/cm²

@Temperature 30.0 °C
33.3 ft-lb/in²

@Temperature 86.0 °F
conditioned; ISO 179/1eU
Charpy Impact, Notched 2.50 J/cm²
11.9 ft-lb/in²
dry; ISO 179/1eA
2.50 J/cm²
11.9 ft-lb/in²
conditioned; ISO 179/1eA
2.50 J/cm²

@Temperature 30.0 °C
11.9 ft-lb/in²

@Temperature 86.0 °F
dry; ISO 179/1eU
2.50 J/cm²

@Temperature 30.0 °C
11.9 ft-lb/in²

@Temperature 86.0 °F
conditioned; ISO 179/1eU
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 20.0 µm/m-°C
11.1 µin/in-°F
ISO 11359-1/-2
CTE, linear, Transverse to Flow 50.0 µm/m-°C
27.8 µin/in-°F
ISO 11359-1/-2
Melting Point 260 °C
500 °F
10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air 100 - 120 °C
212 - 248 °F
long term; EMS
220 °C
428 °F
short term; EMS
Deflection Temperature at 1.8 MPa (264 psi) 250 °C
482 °F
ISO 75-1/-2
Deflection Temperature at 8.0 MPa 210 °C
410 °F
ISO 75-1/-2
Flammability, UL94 V-0
V-0
IEC 60695-11-10
5VA
5VA
IEC 60695-11-20
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+12 ohm-cm
1.00e+12 ohm-cm
dry; IEC 60093
1.00e+12 ohm-cm
1.00e+12 ohm-cm
conditioned; IEC 60093
Surface Resistance 1.00e+13 ohm
1.00e+13 ohm
IEC 60093
Dielectric Strength 33.0 kV/mm
838 kV/in
dry; IEC 60243-1
33.0 kV/mm
838 kV/in
conditioned; IEC 60243-1
Comparative Tracking Index 600 V
600 V
conditioned; IEC 60112
Descriptive Properties Value Comments
Automotive Automotive electr. and electronics, lighting
Cooling and climate control
Exterior
Interior
Powertrain and Chassis
Electricals & Electronics Connectors
Electrical appliances
Electrical equipment
Energy distribution
Lighting
Form Granules
Industry & Consumer goods Heating systems
Housewares
Hydraulics & Pneumatics
Mechanical Engineering
Power transmission
Sports & Leisure
Tools & Accessories
Processing Injection Molding
Product Attributes Long Fiber Reinforced
Partially aromatic Polyamide
Special Characteristics Flame retardant
Improved heat resistance
Copyright © lookpolymers.com All Rights Reserved