Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Lanxess Durethan® AKV 50 H2.0 901510 Nylon 66, 50% Glass Fiber

Category Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 50% Glass Fiber Filled
Manufacturer Lanxess
Trade Name Durethan®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Lanxess Durethan® AKV 50 H2.0 901510 Nylon 66, 50% Glass Fiber.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
PA 66, injection molding grade, 50% glass fibers, good heat-ageing resistance
Physical Properties Metric English Comments
Density 1.57 g/cc
0.0567 lb/in³
ISO 1183
Water Absorption 4.0 %
4.0 %
Test Sim. to ISO 62
Moisture Absorption at Equilibrium 1.4 %
1.4 %
23°C/50% R.H.; Test Sim. to ISO 62
Viscosity Test 146 cm³/g
146 cm³/g
Viscosity number; ISO 307, 1157, 1628
Mechanical Properties Metric English Comments
Tensile Strength at Break 152 MPa
22000 psi
Conditioned; ISO 527-1/-2
230 MPa
33400 psi
ISO 527-1/-2
Elongation at Break 2.6 %
2.6 %
ISO 527-1/-2
4.3 %
4.3 %
Conditioned; ISO 527-1/-2
Tensile Modulus 10.2 GPa
1480 ksi
Conditioned; ISO 527-1/-2
15.3 GPa
2220 ksi
ISO 527-1/-2
Charpy Impact Unnotched 9.50 J/cm²

@Temperature 23.0 °C
45.2 ft-lb/in²

@Temperature 73.4 °F
ISO 179/1eU
10.0 J/cm²

@Temperature -30.0 °C
47.6 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eU
10.0 J/cm²

@Temperature -30.0 °C
47.6 ft-lb/in²

@Temperature -22.0 °F
Conditioned; ISO 179/1eU
Charpy Impact, Notched 1.20 J/cm²

@Temperature -30.0 °C
5.71 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eA
1.50 J/cm²

@Temperature -30.0 °C
7.14 ft-lb/in²

@Temperature -22.0 °F
Conditioned; ISO 179/1eA
1.90 J/cm²

@Temperature 23.0 °C
9.04 ft-lb/in²

@Temperature 73.4 °F
ISO 179/1eA
2.30 J/cm²

@Temperature 23.0 °C
10.9 ft-lb/in²

@Temperature 73.4 °F
Conditioned; ISO 179/1eA
Impact 1162
1162
Puncture maximum force (N); ISO 6603-2
1202
1202
Puncture maximum force, Conditioned (N); ISO 6603-2
1050

@Temperature -30.0 °C
1050

@Temperature -22.0 °F
Puncture maximum force (N); ISO 6603-2
Puncture Energy 3.60 J
2.66 ft-lb
ISO 6603-2
5.00 J
3.69 ft-lb
Conditioned; ISO 6603-2
2.80 J

@Temperature -30.0 °C
2.07 ft-lb

@Temperature -22.0 °F
ISO 6603-2
2.80 J

@Temperature -30.0 °C
2.07 ft-lb

@Temperature -22.0 °F
Conditioned; ISO 6603-2
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 20.0 µm/m-°C
11.1 µin/in-°F
ISO 11359-1/-2
CTE, linear, Transverse to Flow 80.0 µm/m-°C
44.4 µin/in-°F
ISO 11359-1/-2
Melting Point 261 °C
502 °F
10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi) 250 °C
482 °F
ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 250 °C
482 °F
ISO 75-1/-2
Deflection Temperature at 8.0 MPa 205 °C
401 °F
ISO 75-1/-2
Vicat Softening Point 230 °C
446 °F
50°C/h 50N; ISO 306
Flammability, UL94 HB

@Thickness 1.60 mm
HB

@Thickness 0.0630 in
IEC 60695-11-10
HB

@Thickness 3.20 mm
HB

@Thickness 0.126 in
IEC 60695-11-10
Oxygen Index 27 %
27 %
ISO 4589-1/-2
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+14 ohm-cm
1.00e+14 ohm-cm
Conditioned; IEC 60093
1.00e+15 ohm-cm
1.00e+15 ohm-cm
IEC 60093
Surface Resistance 1.00e+12 ohm
1.00e+12 ohm
IEC 60093
Dielectric Constant 4.0

@Frequency 1.00e+6 Hz
4.0

@Frequency 1.00e+6 Hz
IEC 60250
4.5

@Frequency 100 Hz
4.5

@Frequency 100 Hz
IEC 60250
5.0

@Frequency 1.00e+6 Hz
5.0

@Frequency 1.00e+6 Hz
Conditioned; IEC 60250
14

@Frequency 100 Hz
14

@Frequency 100 Hz
Conditioned; IEC 60250
Dielectric Strength 35.0 kV/mm
889 kV/in
Conditioned; IEC 60243-1
40.0 kV/mm
1020 kV/in
IEC 60243-1
Dissipation Factor 0.0090

@Frequency 100 Hz
0.0090

@Frequency 100 Hz
IEC 60250
0.015

@Frequency 1.00e+6 Hz
0.015

@Frequency 1.00e+6 Hz
IEC 60250
0.085

@Frequency 1.00e+6 Hz
0.085

@Frequency 1.00e+6 Hz
Conditioned; IEC 60250
0.32

@Frequency 100 Hz
0.32

@Frequency 100 Hz
Conditioned; IEC 60250
Comparative Tracking Index 550 V
550 V
IEC 60112
Descriptive Properties Value Comments
Additives Release agent
Features Heat stabilized or stable to heat
Form Pellets
ISO Shortname ISO 1874-PA 66,MHR,14-160,GF50
Processing Injection molding
Region Asia Pacific
Europe
Near East/Africa
North America
South and Central America
Copyright © lookpolymers.com All Rights Reserved