Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Menzolit Menzolit® SMC 0400 Unsaturated Polyester UP

Category Polymer , Thermoset , Polyester, TS , Thermoset Polyester Glass SMC
Manufacturer Menzolit
Trade Name Menzolit®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Menzolit Menzolit® SMC 0400 Unsaturated Polyester UP.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
SMC 0400 is a Class-A SMC for exterior body applications on cars, LCV´s and trucks. These compounds mould to parts with good up to excellent surface quality for medium bake in-line and off-line painted (100 – 140°C) body panels. Surface defects like waviness, fibre patterns and orange peel do not occur with this products. To achieve the highest surface quality, we recommend that tool surfaces are mirror polished. To ease demoulding we highly recommend chrome-plating of tool surfaces. Menzolit® SMC 0400 allows. The product shows very good adhesion to paint or In Mould Coating (IMC). Because of its zero shrink properties warpage is eliminated and parts reproducing the dimensions of the cold mould can be produced.Information Provided by Menzolit
Physical Properties Metric English Comments
Density 1.90 g/cc
0.0686 lb/in³
ISO 1183
Water Absorption <= 0.50 %
<= 0.50 %
ISO 62
Linear Mold Shrinkage -0.000500 cm/cm
-0.000500 in/in
ISO 2577
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate 90.0 MPa

@Temperature 22.0 °C
 13100 psi

@Temperature 71.6 °F
 25mm flat samples, compression moulded; ISO 527-4
Tensile Strength, Yield 90.0 MPa

@Temperature 22.0 °C
 13100 psi

@Temperature 71.6 °F
 25mm flat samples, compression moulded; ISO 527-4
Elongation at Yield 1.5 %
1.5 %
tensile rupture strain; ISO 527-4
Modulus of Elasticity 11.0 GPa
1600 ksi
25mm flat samples, compression moulded; ISO 527-4
Flexural Strength 180 MPa

@Temperature 22.0 °C
 26100 psi

@Temperature 71.6 °F
 25 mm wide 100 mm long, flat samples; ISO 14125
Flexural Modulus 10.0 GPa

@Temperature 22.0 °C
 1450 ksi

@Temperature 71.6 °F
 25 mm wide 100 mm long, flat samples; ISO 14125
Compressive Yield Strength 100 MPa
14500 psi
ISO 14126
Poissons Ratio 0.30
0.30
Shear Modulus 4.20 GPa
609 ksi
in plane
Charpy Impact, Notched 8.00 J/cm²
38.1 ft-lb/in²
ISO 179
Thermal Properties Metric English Comments
CTE, linear 10.0 µm/m-°C
5.56 µin/in-°F
ISO 11359-2
Specific Heat Capacity 1.10 J/g-°C
0.263 BTU/lb-°F
Thermal Conductivity 0.700 W/m-K
4.86 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air 165 °C
329 °F
Deflection Temperature at 1.8 MPa (264 psi) >= 200 °C
>= 392 °F
ISO 75-2
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Glass Transition Temp, Tg 200 °C
392 °F
ISO 11357-2
Flammability, UL94 HB

@Thickness 3.00 mm
 HB

@Thickness 0.118 in
Oxygen Index 22 %
22 %
ISO 4589-2
Glow Wire Test 750 °C
1380 °F
IEC 60695-2-12
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+15 ohm-cm
1.00e+15 ohm-cm
IEC 60093
Surface Resistance 1.00e+12 ohm
1.00e+12 ohm
IEC 60093
Dielectric Constant 4.0
4.0
IEC 60250
Dielectric Strength 24.0 kV/mm
610 kV/in
IEC 60243-1
Dissipation Factor 0.010
0.010
IEC 60250
Comparative Tracking Index 600 V
600 V
IEC 60112
Processing Properties Metric English Comments
Processing Temperature 140 - 160 °C
284 - 320 °F
Compression moulding, matched metal die
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved