POLYMER SEARCH

BASF Ultramid® A3EG3 15% Glass Filled PA66 (Dry)

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 20% Glass Fiber Filled
Manufacturer	BASF
Trade Name	Ultramid®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® A3EG3 15% Glass Filled PA66 (Dry).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Ultramid A3EG3 is a 15% glass fiber reinforced injection molding PA66 grade. It conforms to FDA requirements of 21 CFR 177.1500.

Physical Properties	Metric	English	Comments
Density	1.24 g/cc	0.0448 lb/in³	ISO 1183
Water Absorption	7.0 %	7.0 %	ISO 62
Moisture Absorption at Equilibrium	2.2 %	2.2 %	23°C/50% R.H.; ISO 62
Viscosity Test	145 cm³/g	145 cm³/g	Viscosity number
Linear Mold Shrinkage	0.0055 cm/cm	0.0055 in/in	ASTM Data; MD
Melt Flow	70 g/10 min @Load 5.00 kg, Temperature 275 °C	70 g/10 min @Load 11.0 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	114 MPa	16500 psi	0.2 in/min; ASTM Test
	156 MPa @Temperature -40.0 °C	22600 psi @Temperature -40.0 °F	ISO Data
Tensile Strength, Ultimate	130 MPa	18900 psi	5mm/min; ISO 527
Tensile Strength, Yield	74.0 MPa @Temperature 80.0 °C	10700 psi @Temperature 176 °F	ISO Data
Elongation at Break	3.0 %	3.0 %	5mm/min; ISO 527
	3.0 %	3.0 %	0.2 in/min; ASTM Test
	2.6 % @Temperature -40.0 °C	2.6 % @Temperature -40.0 °F	ISO Data
Elongation at Yield	7.4 % @Temperature 80.0 °C	7.4 % @Temperature 176 °F	ISO Data
Tensile Modulus	5.86 GPa	850 ksi	ASTM Test
	6.00 GPa	870 ksi	1mm/min; ISO 527
Flexural Strength	180 MPa	26100 psi	ISO Data
Flexural Modulus	5.17 GPa	750 ksi	ASTM Test
	5.20 GPa	754 ksi	ISO Data
Izod Impact, Notched	0.530 J/cm @Temperature -40.0 °C	0.993 ft-lb/in @Temperature -40.0 °F	ASTM Test
	0.590 J/cm @Thickness 3.17 mm	1.11 ft-lb/in @Thickness 0.125 in	ASTM Test
Izod Impact, Notched (ISO)	5.50 kJ/m²	2.62 ft-lb/in²	ISO Test
Charpy Impact Unnotched	4.50 J/cm²	21.4 ft-lb/in²	ISO 179
	4.30 J/cm² @Temperature -30.0 °C	20.5 ft-lb/in² @Temperature -22.0 °F	ISO 179
Charpy Impact, Notched	0.800 J/cm²	3.81 ft-lb/in²	ISO 179
	0.700 J/cm² @Temperature -30.0 °C	3.33 ft-lb/in² @Temperature -22.0 °F	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	20.0 µm/m-°C @Temperature -30.0 - 30.0 °C	11.1 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
CTE, linear, Parallel to Flow	33.0 µm/m-°C	18.3 µin/in-°F	ISO 11359
CTE, linear, Transverse to Flow	75.0 µm/m-°C	41.7 µin/in-°F	ISO 11359
Melting Point	260 °C	500 °F	10 K/min
	260 °C	500 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	250 °C	482 °F	ASTM Test
	250 °C	482 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	250 °C	482 °F	ASTM Test
	250 °C	482 °F	ISO 75
Vicat Softening Point	250 °C	482 °F	(50 °C/h / 50N) - B/50; ISO 306
Flammability, UL94	HB @Thickness 1.66 mm	HB @Thickness 0.0654 in
	HB @Thickness 0.810 mm	HB @Thickness 0.0319 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+13 ohm-cm	1.00e+13 ohm-cm	IEC 60093
Surface Resistance	1.00e+12 ohm	1.00e+12 ohm	IEC 60093
Dielectric Constant	3.5 @Frequency 1.00e+6 Hz	3.5 @Frequency 1.00e+6 Hz	IEC 60250
Dissipation Factor	0.014 @Frequency 100 Hz	0.014 @Frequency 100 Hz	IEC 60250
	0.023 @Frequency 1.00e+6 Hz	0.023 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	550 V	550 V	IEC 60112

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	Active America
FDA	21 CFR 177.1500
Form	Pellets
Impact Modified	No
NSF Std. 51	Yes
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Heat stabilized or stable to heat

Users viewing this material also viewed the following: