Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 116 °C | 241 °F | B |
Plastcom SLOVALEN PC 18 FRT 5 PP, mod. of mech. properties, fire retardant FeaturesModified copolymer PP for extrusion, contains the modifier of mechanical properties and non halogen and free phosphor flame retardant. Delivered in natural mode and in the full RAL colour sc.. |
|||
Vicat Softening Point | 116 °C | 241 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Cycoloy® CX1440 PC+ABS CYCOLOY CX1440 is a general purpose PC+ABS blend specially developped for thin wall applications requiring weld line strength and high flow with a good balance of properties |
|||
Vicat Softening Point | 116 °C | 241 °F | 50°C/hr; 50N |
Polimeri Europa KOBLEND HI 41 F1 PBT+PC, Impact Grade
(discontinued **) Symbol according to ISO 1043/1: PBT+PC-HI Similar to KOBLEND HI 41 with improved fluidity. Main application fields: bumpers Unfilled. Suitable for Injection Molding. Supplied as pellets.ISO data.. |
|||
Vicat Softening Point | 116 °C | 241 °F | VST/B/50; ISO 306 |
GEHR Plastics PP-30PET-F Polypropylene, 30% PET Fiber Reinforced
(discontinued **) Polypropylene shows a high mechanical strength and a tensile strength, but a low notched impact strength. PP resists stress cracking and it is easy to weld. At minus temperatures it can get brittle... |
|||
Vicat Softening Point | 116 °C | 241 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Geloy XTPM307 ASA+PC (Europe-Africa-Middle East) XTPM307 is a high heat resistant PC/ASA with improved processing stability over HRA150. Typical values measured on natural material.This data was supplied by SABIC-IP for the Europe-Africa-Middle Ea.. |
|||
Vicat Softening Point | 116 °C | 241 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Lexan® SLDM310 PC (Asia Pacific) Mineral filled Antistatic Polycarbonate, HDT110degC type |
|||
Vicat Softening Point | 116 °C | 241 °F | (Ring and Ball) ASTM E28 |
LyondellBasell Montell 0800 Polybutene Key Features: highly isotactic, semi-crystalline homopolymer, good creep resistance, good environmental crack resistance, miscible with polypropylenes, FDA acceptableApplications: concrete carrierMe.. |
|||
Vicat Softening Point | 116 °C | 241 °F | 50 N, 50°C/h; ISO 306 |
LG Chemical LG-709 ABS, Low Gloss, Super High Heat Resistance Information Provided by LG Chem |
|||
Vicat Softening Point | 116 °C @Load 5.00 kg |
241 °F @Load 11.0 lb |
50°C/h; ASTM D1525 |
LG Chemical LG709W ABS, Low Gloss, Heat Resistance Injection Molding, Low Gloss, Heat ResistanceApplication: Automobiles Interior Housing (Column Cover, Pilllars, Etc.)CAS No. 25120-20-1, 9003-56-9, 25747-74-7 and 9003-54-7Information provided by LG.. |
|||
Vicat Softening Point | 116 °C | 241 °F | ASTM D1525-97 |
Ipiranga Petrochem MB 0434 LS-L MDPE IPQ employs Spherilene technology from Basell in the production of MDPE. The raw materials, which are supplied by COPESUL, are pre-treated and fed into gas-phase reactors, where medium density polye.. |
|||
Vicat Softening Point | 116 °C | 241 °F | ASTM D1525-97 |
Ipiranga Petrochem MB 0435 MDPE IPQ employs Spherilene technology from Basell in the production of MDPE. The raw materials, which are supplied by COPESUL, are pre-treated and fed into gas-phase reactors, where medium density polye.. |
|||
Vicat Softening Point | 116 °C | 241 °F | ISO 306 |
Iran Petrochemical (PCC) MF3313 High Density Polyethylene MF3313 is a high molecular weight high density polyethylene . Applications: extrusion, film, blown, bags, and density modifies.Information provided by Iran Petrochemical Commercial Co. |
|||
Vicat Softening Point | 116 °C @Load 5.10 kg |
241 °F @Load 11.2 lb |
50°C/h; ISO 306 |
Styrolution Novodur® 4115 ABS Novodur Ultra 4115 is a PC modified high heat injection molding grade. It provides good heat resistance combined with high impact strength.Information provided by Styrolution |
|||
Vicat Softening Point | 116 °C | 241 °F | ASTM D1525 |
SK Chemicals SKYTHANE® S398A Polyester Based Thermoplastic Polyurethane Elastomer Description: SK Chemicals has supplied Thermoplastic Polyurethane Elastomer (TPU) under the name of SKYTHANE. Applications include:Keyboard CoversOutsoles of Soccer ShoesWire and CableAirbagsSheets .. |
|||
Vicat Softening Point | 116 °C | 241 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics NORYL EXNL0353 PPE+HIPS EXNL0353 resin is a modified PPE + PS blend with an excellent balance of non-halogenated flame retardance, hydrolytic stability, impact and heat resistance, good flow, and low specific gravity for l.. |
|||
Vicat Softening Point | 116 °C | 241 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics NORYL PVX0901 PPE+PS (Asia Pacific) Multi purpose V1 grade |
|||
Vicat Softening Point | 116 °C | 241 °F | ASTM D1525 |
Lubrizol Estane® S398A Thermoplastic Polyurethane Type: Estane® S398A is a Shore 98A, polyester based thermoplastic polyurethane (TPU) with excellent transparency. FDA approved (21 CFR 177.2600, 177.1680).Uses: Injection Molding.Information Provi.. |
|||
Vicat Softening Point | 116 °C | 241 °F | 120°C/hr, 9.8N; ASTM D1525 |
Lubrizol Pellethane® 2363-75D Thermoplastic Polyurethane Elastomer Feature: USP Class VIAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product line from Dow in 2009. |
|||
Vicat Softening Point | 116 °C @Load 1.02 kg |
241 °F @Load 2.25 lb |
A50; ISO 306 |
Borealis Borseal™ RE939CF Polypropylene Copolymer Borseal™ RE939CF is a random copolymer. This grade is suitable for the manufacturing of unoriented films on chill roll processes. Applications: Borseal™ RE939CF is designed for: Food packaging,.. |
|||
Vicat Softening Point | 116 °C | 241 °F | ASTM-D1525 |
Polyram RamLloy PBB104 PC/ABS alloy, Injection Molding PC/ABS alloy for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Vicat Softening Point | 116 °C | 241 °F | ASTM D1525 |
Westlake MC2001 High Density Polyethylene Coating Westlake MC2001 is a high density polyethylene designed for extrusion coating and lamination applications. MC2001 provides improved barrier properties, temperature resistance, stress crack resistanc.. |
|||
Vicat Softening Point | 116 °C | 241 °F | A50; ISO 306 |
Lubrizol ESTANE® 58133 Ester Based Thermoplastic Polyurethane (European Grade) Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability .. |
|||
Vicat Softening Point | 116 °C | 241 °F | 50°C/h 50N; ISO 306 |
Covestro Bayblend® FR 3011 Polycarbonate + ABS, Flame Retardant Grade Injection molding gradegood flowhigh heat resistanceVicat/B 120 temperature = 118 °CUL-listing 94 V-0 (1.5 mm) antimony-, chlorine- and bromine-free flame retardantglow wire test (GWFI): 960 °.. |
|||
Vicat Softening Point | 116 °C | 241 °F | |
Covestro Bayblend® KU 2-1480 Polycarbonate/ABS Blend Increased thermal stability during processing, slightly higher modulus of elasticity and slightly decreased low-temperature toughness compared to BAYBLEND T 65 MN.Information provided by Bayer.As of.. |
|||
Vicat Softening Point | 116 °C | 241 °F | 50°C/h 50N |
Covestro Texin® 945U Urethane Thermoplastic Elastomer Key Features:UnfilledU.V. stabilized or stable to weatherSuitable processing methods:Injection moldingProfile extrusionSheet extrusionInformation provided by Bayer Polymers.As of 1 September 2015, B.. |
|||
Vicat Softening Point | 116 °C @Load 1.00 kg, Thickness 3.17 mm |
241 °F @Load 2.20 lb, Thickness 0.125 in |
ASTM D1525 |
Diamond Polymers ABS 4012B Blow Molding Grade Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Vicat Softening Point | 116 °C @Load 1.00 kg |
241 °F @Load 2.20 lb |
120°C/hr; ASTM D1525 |
Diamond Polymers Centrex® HGM Automotive Grade, Injection Molding Grade Centrex HGM resin is an exceptionally high-gloss grade of ASA (acrylonitrile-styrene-acrylate). This injection molding grade has excellent gloss retention, excellent resistance to chemicals and high.. |
|||
Vicat Softening Point | 116 °C | 241 °F | ASTM D1525 |
Dow DFDC-7525 NT High Density Polyethylene Resin DOW DFDC-7525 NT is produced using UNIPOL™ process technology. It is intended for use in thin wall drip tape and micro-irrigation tube, hose and tube, and profile extrusion applications. Informati.. |
|||
Vicat Softening Point | 116 °C | 241 °F | ASTM D1525 |
Dow TUFLIN™ HS-7065 NT 7 Linear Low Density Polyethylene Resin Hexene Linear Low Density Resin Good Processability at Narrow Die Gaps Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a TUFLIN™ HS-7065 NT 7 is a fractional melt, ethylene-hexene copolymer, designe.. |
|||
Vicat Softening Point | 116 °C | 241 °F | ASTM D1525 |
Dow PELLETHANE® 2103-75D Film Grade Thermoplastic Polyurethane Elastomer
(discontinued **) Description: PELLETHANE® 2103-75D UV stabilized, polyether based thermoplastic polyurethane elastomer has excellent hydrolytic stability and excellent resistance to micro-organisms. Applications in.. |