Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

UBE UBESTA® 3035JU5 Plasticized Industrial Grade Nylon 12

Category Polymer , Thermoplastic , Nylon , Nylon 12
Manufacturer UBE
Trade Name UBESTA®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF UBE UBESTA® 3035JU5 Plasticized Industrial Grade Nylon 12.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Description: UBE UBESTA® Industrial grade Nylon 12Comments: ultra flexible, heat resistanceInformation provided by UBE.
Physical Properties Metric English Comments
Density 1.03 g/cc
0.0372 lb/in³
ASTM D792
Melt Flow 14 g/10 min

@Load 2.16 kg,
Temperature 235 °C
14 g/10 min

@Load 4.76 lb,
Temperature 455 °F
ASTM D1238R
Mechanical Properties Metric English Comments
Hardness, Shore D 54
54
ASTM D2240
Tensile Strength at Break >= 30.0 MPa
>= 4350 psi
ASTM D638
Tensile Strength, Yield 13.0 MPa
1890 psi
ASTM D638
Elongation at Break >= 300 %
>= 300 %
ASTM D638
Flexural Strength 11.0 MPa
1600 psi
ASTM D790
Flexural Modulus 0.190 GPa
27.6 ksi
ASTM D790
Izod Impact, Notched NB
NB
ASTM D256
Thermal Properties Metric English Comments
Melting Point 160 °C
320 °F
ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi) 105 °C
221 °F
ASTM D648
Processing Properties Metric English Comments
Processing Temperature 230 °C
446 °F
Flange Temperature for T-Die Cast Film Extrusion
Feed Temperature 40.0 °C
104 °F
Injection Molding
Zone 1 190 °C
374 °F
For T-Die Cast Film Extrusion
200 °C
392 °F
Injection Molding
230 °C
446 °F
For 8x1 mm Tube Extrusion
Zone 2 210 °C
410 °F
For T-Die Cast Film Extrusion
210 °C
410 °F
Injection Molding
225 °C
437 °F
For 8x1 mm Tube Extrusion
Zone 3 220 °C
428 °F
For 8x1 mm Tube Extrusion
220 °C
428 °F
Injection Molding
230 °C
446 °F
For T-Die Cast Film Extrusion
Zone 4 215 °C
419 °F
For 8x1 mm Tube Extrusion
220 °C
428 °F
Injection Molding
Zone 5 210 °C
410 °F
Injection Molding
Die Temperature 230 °C
446 °F
For T-Die Cast Film Extrusion
Mold Temperature 40.0 - 60.0 °C
104 - 140 °F
Injection Molding
Injection Velocity 100 mm/sec
3.94 in/sec
Injection Molding
Die Opening 0.0400 cm
0.0157 in
For T-Die Cast Film Extrusion
Roll Temperature 50.0 °C
122 °F
Chill Roll Temperature for T-Die Cast Film Extrusion
Drying Temperature 80.0 °C
176 °F
Option 1
100 °C
212 °F
Option 2
110 °C
230 °F
Option 3
Dry Time 2 - 4 hour
2 - 4 hour
Option 3
4 - 6 hour
4 - 6 hour
Option 2
6 - 8 hour
6 - 8 hour
Option 1
Injection Pressure 40.0 - 50.0 MPa
5800 - 7250 psi
Injection Molding (Injection pressure should be increased when molding thin wall parts. Pressure up to 75 bar can be used here.)
Hold Pressure 25.0 - 50.0 MPa
3630 - 7250 psi
Injection Molding
Back Pressure 5.00 MPa
725 psi
Injection Molding
Screw Speed 15 - 76 rpm
15 - 76 rpm
For 8x1 mm Tube Extrusion
Descriptive Properties Value Comments
C/R 3-3.5:1
For 8x1 mm Tube Extrusion
Calibrating Vacuum 100 mbar
For 8x1 mm Tube Extrusion
Calibration 9.95 mm
For 8x1 mm Tube Extrusion
Compression Ratio 2.5-3.5:1
Injection Molding
min 3:1
For 8x1 mm Tube Extrusion
Die Diameter 16 mm
For 8x1 mm Tube Extrusion
Die Width 300 mm
For T-Die Cast Film Extrusion
Extractables 31%
Tolerance (DIN 73378 EtOH 18hr) 2%
Extruder Barmag, Screw Diameter = 30 mm
For T-Die Cast Film Extrusion
Extruder Characteristics 65 mm screw diameter
For 8x1 mm Tube Extrusion
Film Thickness 60 microns
For T-Die Cast Film Extrusion
Flight Depth in the Feeding Zone 10-15% of Screw Diameter
Injection Molding
Flight Depth in the Metering Zone 5-7% of Screw Diameter
Injection Molding
Haul Off Speed 5 m/min
For T-Die Cast Film Extrusion
Haul Speed 10-55 m/min
For 8x1 mm Tube Extrusion
L/D Ratio 25:1
For 8x1 mm Tube Extrusion
min 20:1
Injection Molding
Length of Compression Zone 25-45% of total screw length
Injection Molding
30% of screw length
For 8x1 mm Tube Extrusion
Length of Feeding Zone 20-40% of total screw length
Injection Molding
30-40% of screw length
For 8x1 mm Tube Extrusion
Length of Metering Zone 30-45% of screw length
For 8x1 mm Tube Extrusion
35-45% of total screw length
Injection Molding
Mandrel Diameter 12 mm
For 8x1 mm Tube Extrusion
Peripheral screw speed 10 m/min
Injection Molding
Water Temperature 10-18°C
For 8x1 mm Tube Extrusion
Copyright © lookpolymers.com All Rights Reserved