- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- Epoxy Adhesive
- Aremco Aremco-Bond™ 2318 High Performance Epoxide
Aremco Aremco-Bond™ 2318 High Performance Epoxide
| Category | Polymer , Adhesive , Thermoset , Epoxy , Epoxy Adhesive |
| Manufacturer | Aremco |
| Trade Name | Aremco-Bond™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Aremco-Bond™ 2318 High Performance Epoxide.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.58 g/cc | 1.58 g/cc | |
| Viscosity | 16000 cP | 16000 cP | mixed viscosity |
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 89 | 89 | |
| Flexural Strength | 97.2 MPa | 14100 psi | ASTM D790 |
| Shear Strength | 7.826 MPa | 1135 psi | ASTM D1002-94 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 70.2 µm/m-°C | 39.0 µin/in-°F | |
| Thermal Conductivity | 0.634 W/m-K | 4.40 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 120 °C | 248 °F | |
| Minimum Service Temperature, Air | -55.0 °C | -67.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 3.00e+15 ohm-cm | 3.00e+15 ohm-cm | |
| Dielectric Constant | 4.8 @Frequency 1000 Hz |
4.8 @Frequency 1000 Hz |
|
| Dielectric Strength | 18.1 kV/mm | 460 kV/in | |
| Dissipation Factor | 0.014 | 0.014 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 min @Temperature 93.3 °C |
2.00 hour @Temperature 200 °F |
recommended cure |
| 240 min @Temperature 20.0 °C |
4.00 hour @Temperature 68.0 °F |
recommended cure | |
| 1440 - 2880 min @Temperature 23.0 °C |
24.0 - 48.0 hour @Temperature 73.4 °F |
||
| Pot Life | 42.0 min @Temperature 25.0 °C |
42.0 min @Temperature 77.0 °F |
100 gm mass |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Chemical Resistance | Excellent | |
| Color | Black | |
| Mix Ratio | 100:12 |
Users viewing this material also viewed the following:
- Nilit FRIANYL A63 CV15 Nylon 6.6 for injection molding, 15% carbon fiber reinforced
- Solvay Chemicals Ixper® 70C Calcium Peroxide
- A. Schulman SCHULAFLEX® SF 230 Ethylene-Based Butene Plastomer
- DSM Stanyl® TE250F6 (DAM) Nylon 46 30% Glass Reinforced, Heat Stabilized, Flame Retardant (North America)
- DAK Americas Laser+® C K62A PET
- BASF Ultramid® 8231G HS 14% Glass Filled PA6 (Conditioned)
- Covestro Makrofol® LT 4-4 Polycarbonate
- Plaskolite West Optix® CA-51 General Purpose Acrylic Resin
- Lucobit Lucopren® 1500H Soft Polyolefin Granules
Copyright © lookpolymers.com All Rights Reserved