Aremco Corr-Paint™ CP4060 High Temperature Protective Coating Silicone, Aluminum Filled

Category	Other Engineering Material , Ceramic/Metallic Coating , Polymer , Thermoset , Silicone
Manufacturer	Aremco
Trade Name	Corr-Paint™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Aremco Corr-Paint™ CP4060 High Temperature Protective Coating Silicone, Aluminum Filled.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

This silicone-based, heat resistant coatings are formulated using a state-of-the-art, VOC-compliant, water-dispersible silicone resin. CP4000 adheres to metals, ceramics, refractories, and quartz, and offer outstanding resistance to outdoor weathering, UV light, salt spray, chemical corrosion, thermal cycling, and temperatures to 1100 ºF.

Physical Properties	Metric	English	Comments
Specific Gravity	1.31 g/cc	1.31 g/cc
Solids Content	38.3 %	38.3 %	by volume
	46.5 %	46.5 %	by weight
Volatile Organic Compounds (VOC) Content	119 g/l	119 g/l
Viscosity	750 - 950 cP	750 - 950 cP
Thickness	25.4 microns	1.00 mil	recommended dry film thickness
	66.0 microns	2.60 mil	estimated wet film thickness
Storage Temperature	12.8 - 29.4 °C	55.0 - 85.0 °F

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	593 °C	1100 °F
Flash Point	>= 100 °C	>= 212 °F

Processing Properties	Metric	English	Comments
Processing Temperature	10.0 - 48.9 °C	50.0 - 120 °F	Application Temperature
Dry Time	1.00 - 2.00 hour	1.00 - 2.00 hour	Touch
	2.00 - 4.00 hour	2.00 - 4.00 hour	Handling
	1.0 - 24.0 hour	1.0 - 24.0 hour	Recoat
Cure Time	>= 60.0 min	>= 1.00 hour	Air Set prior to curing
	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
	60.0 min @Temperature 232 °C	1.00 hour @Temperature 450 °F	Adequate ventilation is required when curing these products. Outgassing will occur above 300°F and cease after 750°F. An additional 30 minutes is required at the highest service temperature if service temperature is below 750°F.
Shelf Life	6.00 Month	6.00 Month

Descriptive Properties	Value	Comments
Color	Red
Dry Film Coverage ft2/gal	614	at 1 mil
Primer	Not Required
Thinner	Water

Users viewing this material also viewed the following: