POLYMER SEARCH

BASF Ultraform® N2720 M210 POM

Category	Polymer , Thermoplastic , Acetal (POM) , Acetal Copolymer, Unreinforced
Manufacturer	BASF
Trade Name	Ultraform®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultraform® N2720 M210 POM.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Description: Is a POM, product with increased stiffness and strength as well as good wear characteristics, used, for instance, for sliding chains and conveyor systems.Information provided by BASF

Physical Properties	Metric	English	Comments
Bulk Density	0.650 - 0.900 g/cc	0.0235 - 0.0325 lb/in³
Density	1.48 g/cc	0.0535 lb/in³	ISO 1183
Water Absorption	0.80 %	0.80 %	Saturation; ISO 62
Moisture Absorption at Equilibrium	0.20 %	0.20 %	23°C; 50% RH; ISO 62
Linear Mold Shrinkage, Flow	0.017 cm/cm	0.017 in/in	ISO 2577
Linear Mold Shrinkage, Transverse	0.019 cm/cm	0.019 in/in	ISO 2577
Melt Flow	10.36 g/10 min @Load 2.16 kg, Temperature 190 °C	10.36 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	145 MPa @Load 36.5 kg, Time 30.0 sec	21000 psi @Load 80.5 lb, Time 0.00833 hour	ISO 2039-1
Tensile Strength, Yield	63.0 MPa	9140 psi	50 mm/min; ISO 527-2
Elongation at Break	18 %	18 %	Nominal, 50mm/min; ISO 527-2
Elongation at Yield	6.5 %	6.5 %	ISO 527-2
Modulus of Elasticity	4.00 GPa	580 ksi	ISO 527-2
Charpy Impact Unnotched	8.00 J/cm² @Temperature -30.0 °C	38.1 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
	8.50 J/cm² @Temperature 23.0 °C	40.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.350 J/cm² @Temperature -30.0 °C	1.67 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	0.350 J/cm² @Temperature 23.0 °C	1.67 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	80.0 µm/m-°C @Temperature 23.0 - 55.0 °C	44.4 µin/in-°F @Temperature 73.4 - 131 °F	DIN 53752
Melting Point	166 - 186 °C	331 - 367 °F
Maximum Service Temperature, Air	100 °C	212 °F
Deflection Temperature at 1.8 MPa (264 psi)	115 °C	239 °F	ISO 75-2
Vicat Softening Point	150 °C	302 °F	ISO 306
Decomposition Temperature	>= 240 °C	>= 464 °F
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	IEC 60093
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Dielectric Constant	3.8 @Frequency 1.00e+6 Hz	3.8 @Frequency 1.00e+6 Hz	IEC 60250
	3.9 @Frequency 100 Hz	3.9 @Frequency 100 Hz	IEC 60250
Dielectric Strength	40.0 kV/mm	1020 kV/in	IEC 60243-1
Dissipation Factor	0.0050 @Frequency 100 Hz	0.0050 @Frequency 100 Hz	IEC 60250
	0.0060 @Frequency 1.00e+6 Hz	0.0060 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	Test solution A; IEC 60112
	600 V	600 V	Test solution B; IEC 60112

Processing Properties	Metric	English	Comments
Processing Temperature	200 °C	392 °F	Hopper Throat
Zone 1	200 °C	392 °F	Feed zone
Zone 2	200 °C	392 °F	Compression
Zone 3	200 °C	392 °F	Metering-zone
Zone 4	200 °C	392 °F	Nozzle
Melt Temperature	200 °C	392 °F	Optimal
	190 - 230 °C	374 - 446 °F	Injection-molding
Mold Temperature	60.0 - 120 °C	140 - 248 °F	Injection-molding
	90.0 °C	194 °F	Optimal

Descriptive Properties	Value	Comments
Commercial Status	Europe
Ignition Temperature	320 - 340°C	ASTM D1929
Peripheral screw speed	<0.3 m/s
Primary Processing Technique	Injection Molding

Users viewing this material also viewed the following: