Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

BASF Ultramid® B3WG7 BK 00564 35% Glass Filled PA6 (Conditioned)

Category Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 40% Glass Fiber Filled
Manufacturer BASF
Trade Name Ultramid®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF BASF Ultramid® B3WG7 BK 00564 35% Glass Filled PA6 (Conditioned).pdf
Price EMAIL US    sales@lookpolymers.com
Material Notes:
Description: 35% glass-fiber reinforced and heat aging resistant injection-molding grade, e.g. for automotive manifolds and pedals.Information provided by BASF
Physical Properties Metric English Comments
Density 1.41 g/cc
0.0509 lb/in³
ISO 1183
Water Absorption 5.9 - 6.5 %
5.9 - 6.5 %
Saturation; ISO 62
Moisture Absorption at Equilibrium 1.8 - 2.2 %
1.8 - 2.2 %
23°C; 50% RH; ISO 62
Viscosity Measurement 140
140
ISO 307
Linear Mold Shrinkage 0.0035 cm/cm
0.0035 in/in
restricted
Melt Flow 66.45 g/10 min

@Load 5.00 kg,
Temperature 275 °C
 66.45 g/10 min

@Load 11.0 lb,
Temperature 527 °F
 ISO 1133
Mechanical Properties Metric English Comments
Tensile Strength, Yield 130 MPa
18900 psi
50 mm/min; ISO 527-1/-2
Elongation at Yield 7.0 %
7.0 %
50 mm/min; ISO 527-1/-2
Modulus of Elasticity 7.20 GPa
1040 ksi
ISO 527-1/-2
Flexural Strength 200 MPa
29000 psi
at max force; ISO 178
Flexural Modulus 6.30 GPa
914 ksi
ISO 178
Izod Impact, Notched (ISO) 27.0 kJ/m²

@Temperature 23.0 °C
 12.8 ft-lb/in²

@Temperature 73.4 °F
 ISO 180/A
Charpy Impact Unnotched 11.0 J/cm²

@Temperature 23.0 °C
 52.3 ft-lb/in²

@Temperature 73.4 °F
 ISO 179/1eU
Charpy Impact, Notched 3.30 J/cm²

@Temperature 23.0 °C
 15.7 ft-lb/in²

@Temperature 73.4 °F
 ISO 179/1eA
Tensile Creep Modulus, 1000 hours 3300 MPa

@Strain <=0.500 %
 479000 psi

@Strain <=0.500 %
 ISO 899-1
Thermal Properties Metric English Comments
Specific Heat Capacity 1.40 J/g-°C
0.335 BTU/lb-°F
Thermal Conductivity 0.360 W/m-K
2.50 BTU-in/hr-ft²-°F
DIN 52612
Melting Point 220 °C
428 °F
DIN 53765
Maximum Service Temperature, Air 145 °C
293 °F
for 50% loss of tensile strength after 20000hr
175 °C
347 °F
for 50% loss of tensile strength after 5000hr
200 °C
392 °F
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+10 ohm-cm
1.00e+10 ohm-cm
IEC 60093
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Dielectric Constant 6.2

@Frequency 1.00 Hz
 6.2

@Frequency 1.00 Hz
 IEC 60250
Dissipation Factor 0.19

@Frequency 1.00e+6 Hz
 0.19

@Frequency 1.00e+6 Hz
 IEC 60250
Comparative Tracking Index 450 V
450 V
Test solution A; IEC 60112
Processing Properties Metric English Comments
Melt Temperature 270 - 290 °C
518 - 554 °F
Injection-molding/Extrusion
Mold Temperature 80.0 - 90.0 °C
176 - 194 °F
Injection-molding
Descriptive Properties Value Comments
Color BK 00564
Commercial Status Europe
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved