- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Clariant Renol 6602-L Nylon 66, Internally Lubricated
Clariant Renol 6602-L Nylon 66, Internally Lubricated
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 |
| Manufacturer | Clariant |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Clariant Renol 6602-L Nylon 66, Internally Lubricated.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Data provided by Clariant Masterbatches
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.012 - 0.017 cm/cm | 0.012 - 0.017 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 68.9 MPa | 10000 psi | ASTM D638 |
| Elongation at Yield | 35 % | 35 % | ASTM D638 |
| Flexural Yield Strength | 93.1 MPa | 13500 psi | ASTM D790 |
| Flexural Modulus | 2.48 GPa | 360 ksi | ASTM D790 |
| Izod Impact, Notched | 0.481 J/cm @Temperature 22.8 °C |
0.900 ft-lb/in @Temperature 73.0 °F |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 224 °C | 435 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 81.1 °C | 178 °F | ASTM D648 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 266 - 288 °C | 510 - 550 °F | |
| Mold Temperature | 65.6 - 93.3 °C | 150 - 200 °F | |
| Dry Time | 2 - 4 hour @Temperature 79.4 °C |
2 - 4 hour @Temperature 175 °F |
to ensure moisture content is less than 0.2% |
| Injection Pressure | 4.96 - 8.27 MPa | 720 - 1200 psi | Secondary |
| 8.27 - 13.8 MPa | 1200 - 2000 psi | Initial | |
| Back Pressure | 0.345 - 1.72 MPa | 50.0 - 250 psi | |
| Shot Size | 30 - 80 % | 30 - 80 % | |
| Screw Speed | 20 - 100 rpm | 20 - 100 rpm |
Users viewing this material also viewed the following:
- S&E Specialty Polymers AcryliMax 301HP ABS
- H.C. Starck Pure Molybdenum OMPP Pellets (99.8%)
- Schott Glass 8448 Intermediate Sealing Glass
- Solvay TECHNYLSTARâ„¢ SX 218 V50 PA6, 50% glass filled, Conditioned
- Master Bond EP21TDCF-3 Two Component, Higher Viscosity Epoxy System
- Unifrax Fiberfrax® Fiberwall® 601 Inconel Systems Hardware
- Covestro Makrolon® 3258 Polycarbonate, General Purpose, Mold Release, Biocompatibility
- EMS-Grivory Grivory® BRZ 347 W PA6
- 3M FP02600N White Polypropylene Label Product
Copyright © lookpolymers.com All Rights Reserved