Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Manifattura Cattaneo PA 6 Nylon

Category Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced
Manufacturer Manifattura Cattaneo spa
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Manifattura Cattaneo PA 6 Nylon.pdf
Price EMAIL US    sales@lookpolymers.com
Material Notes:
Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a.
Physical Properties Metric English Comments
Density 1.14 g/cc
0.0412 lb/in³
ISO 1183
Moisture Absorption at Equilibrium 3.0 %

@Temperature 23.0 °C
 3.0 %

@Temperature 73.4 °F
 50% RH; ISO 62
Water Absorption at Saturation 9.5 %
9.5 %
ISO 62
Mechanical Properties Metric English Comments
Hardness, Rockwell M 85
85
ISO 2039-2
Tensile Strength, Yield 45.0 MPa
6530 psi
Conditioned 50% RH; ISO 527
90.0 MPa
13100 psi
Dried; ISO 527
Elongation at Break >= 50 %
>= 50 %
Conditioned 50% RH; ISO 527
Elongation at Yield 4.5 %
4.5 %
Dried; ISO 527
20 %
20 %
Conditioned 50% RH; ISO 527
Tensile Modulus 1.00 GPa
145 ksi
Conditioned 50% RH; ISO 527
3.00 GPa
435 ksi
Dried; ISO 527
Compressive Yield Strength 24.0 MPa

@Strain 1.00 %
 3480 psi

@Strain 1.00 %
 ISO 604
Poissons Ratio 0.38
0.38
Dried
0.45
0.45
Conditioned 50% RH
Charpy Impact Unnotched NB
NB
ISO 179
Charpy Impact, Notched 0.900 J/cm²
4.28 ft-lb/in²
Dried; ISO 179
NB
NB
Conditioned 50% RH; ISO 179
Coefficient of Friction, Dynamic 0.26
0.26
on polished steel; MPC Test
Coefficient of Friction, Static 0.22
0.22
on polished steel; MPC Test
K Factor (Wear Factor) 8.5
8.5
µm/s. PV = 0.1 MPa-m/s; max P = 24 MPa; MPC Test
Limiting Pressure Velocity 0.0700 MPa-m/sec
2000 psi-ft/min
without lubrication; MPC Test
Thermal Properties Metric English Comments
CTE, linear 85.0 µm/m-°C

@Temperature 23.0 - 100 °C
 47.2 µin/in-°F

@Temperature 73.4 - 212 °F
 ASTM D696
Thermal Conductivity 0.280 W/m-K
1.94 BTU-in/hr-ft²-°F
DOM 52612
Maximum Service Temperature, Air 85.0 °C
185 °F
Deflection Temperature at 0.46 MPa (66 psi) 160 °C
320 °F
Dried; ISO 75
180 °C
356 °F
Conditioned 50% RH; ISO 75
Deflection Temperature at 1.8 MPa (264 psi) 70.0 °C
158 °F
Dried; ISO 75
90.0 °C
194 °F
Conditioned 50% RH; ISO 75
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Oxygen Index 25 %
25 %
ISO 4589
Electrical Properties Metric English Comments
Volume Resistivity >= 1.00e+14 ohm-cm
>= 1.00e+14 ohm-cm
IEC 60093
Surface Resistance >= 1.00e+12 ohm
>= 1.00e+12 ohm
IEC 60094
Dielectric Constant 3.8

@Frequency 1.00e+6 Hz
 3.8

@Frequency 1.00e+6 Hz
 IEC 60250
Dielectric Strength 16.0 kV/mm

@Thickness 2.00 mm
 406 kV/in

@Thickness 0.0787 in
 IEC 60243
Dielectric Loss Index 0.060

@Frequency 1.00e+6 Hz
 0.060

@Frequency 1.00e+6 Hz
 IEC 60250
Compliance Properties Metric English Comments
FDA Yes
Yes
Descriptive Properties Value Comments
Color Black
White
UV Resistance N
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved