Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Aremco Corr-Paint™ CP2050-XX High Temperature Protective Coating Epoxy-Phenolic, Glass Fiber Filled

Category Ceramic , Other Engineering Material , Ceramic/Metallic Coating
Manufacturer Aremco
Trade Name Corr-Paint™
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Aremco Corr-Paint™ CP2050-XX High Temperature Protective Coating Epoxy-Phenolic, Glass Fiber Filled.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
This epoxy and urethane based coating is used for producing corrosion and wear resistant barriers to 500 °F. Typical applications include tanks, pipelines, boilers, precipitators, scrubbers, bag houses, cyclones, hoppers and other process equipment used in the power, pulp and paper, and chemical processing industries.
Physical Properties Metric English Comments
Specific Gravity 1.60 g/cc
1.60 g/cc
Solids Content 100 %
100 %
weight
100 %
100 %
volume
Volatile Organic Compounds (VOC) Content 0.00 g/l
0.00 g/l
Thickness >= 1270 microns
>= 50.0 mil
estimated wet film thickness
>= 1270 microns
>= 50.0 mil
recommended dry film thickness
Storage Temperature 4.44 - 32.2 °C
40.0 - 90.0 °F
Mechanical Properties Metric English Comments
Hardness, Shore D 86
86
for Epoxy Coating
Elongation at Break 3.0 %
3.0 %
for Epoxy Coating
Flexural Strength 92.4 MPa
13400 psi
for Epoxy Coating
Compressive Strength 71.0 MPa
10300 psi
for Epoxy Coating
Adhesive Bond Strength 2.07 MPa

@Temperature 175 °C
300 psi

@Temperature 347 °F
Lap Shear Strength vs. Aluminum
6.21 MPa

@Temperature 150 °C
900 psi

@Temperature 302 °F
Lap Shear Strength vs. Aluminum
12.4 MPa

@Temperature 100 °C
1800 psi

@Temperature 212 °F
Lap Shear Strength vs. Aluminum
18.6 MPa

@Temperature 25.0 °C
2700 psi

@Temperature 77.0 °F
Lap Shear Strength vs. Aluminum
Thermal Properties Metric English Comments
Maximum Service Temperature, Air 204 °C
400 °F
Flash Point >= 93.3 °C
>= 200 °F
Processing Properties Metric English Comments
Processing Temperature 10.0 - 32.2 °C
50.0 - 90.0 °F
Application Temperature
Dry Time 6.00 - 8.00 hour
6.00 - 8.00 hour
Touch
12.0 - 14.0 hour
12.0 - 14.0 hour
Handling
4.00 - 48.0 hour
4.00 - 48.0 hour
Recoat
Cure Time 240 min

@Temperature 79.4 °C
4.00 hour

@Temperature 175 °F
>2 Hour Air Set Required Prior to Curing
2880 min

@Temperature 22.2 °C
48.0 hour

@Temperature 72.0 °F
>2 Hour Air Set Required Prior to Curing
Pot Life 42.0 min

@Temperature 23.0 °C
42.0 min

@Temperature 73.4 °F
Shelf Life 12.0 Month

@Temperature 23.0 °C
12.0 Month

@Temperature 73.4 °F
Descriptive Properties Value Comments
Color Brown-Red
Dry Film Coverage ft2/gal 1604
at 1 mil
Mix Ratio 1:1
Epoxy:Phenolic
Mix Ratio By Weight 1:1
resin:activator
Mixed Viscosity Paste
Primer Not Required or Recommended
Thinner Not Required or Recommended
Copyright © lookpolymers.com All Rights Reserved