BASF Ultramid® FRee B3U31G4 20% Glass Filled PA66 FR (Dry)

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 20% Glass Fiber Filled
Manufacturer	BASF
Trade Name	Ultramid®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® FRee B3U31G4 20% Glass Filled PA66 FR (Dry).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Description: Halogen-free and phosphorus free flame retardant injection-molding grade with outstanding free-flow properties, good electrical properties and low smoke density; resistant to glow wire test up to 960°C.Information provided by BASF

Physical Properties	Metric	English	Comments
Density	1.31 g/cc	0.0473 lb/in³	ISO 1183
Water Absorption	6.6 - 7.2 %	6.6 - 7.2 %	Saturation; ISO 62
Moisture Absorption at Equilibrium	2.0 - 2.4 %	2.0 - 2.4 %	23°C; 50% RH; ISO 62
Melt Flow	131 g/10 min @Load 5.00 kg, Temperature 275 °C	131 g/10 min @Load 11.0 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	90.0 MPa	13100 psi	50 mm/min; ISO 527-1/-2
Elongation at Yield	2.8 %	2.8 %	50 mm/min; ISO 527-1/-2
Modulus of Elasticity	6.10 GPa	885 ksi	ISO 527-1/-2
Flexural Modulus	5.70 GPa	827 ksi	ISO 178
Izod Impact, Notched (ISO)	3.00 kJ/m² @Temperature -30.0 °C	1.43 ft-lb/in² @Temperature -22.0 °F	ISO 180/A
	3.50 kJ/m² @Temperature 23.0 °C	1.67 ft-lb/in² @Temperature 73.4 °F	ISO 180/A
Charpy Impact Unnotched	2.50 J/cm² @Temperature -30.0 °C	11.9 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
	3.00 J/cm² @Temperature 23.0 °C	14.3 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.300 J/cm² @Temperature -30.0 °C	1.43 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	0.350 J/cm² @Temperature 23.0 °C	1.67 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	50.0 - 55.0 µm/m-°C @Temperature 23.0 - 80.0 °C	27.8 - 30.6 µin/in-°F @Temperature 73.4 - 176 °F	DIN 11359-1/-2
CTE, linear, Transverse to Flow	50.0 - 60.0 µm/m-°C @Temperature 23.0 - 80.0 °C	27.8 - 33.3 µin/in-°F @Temperature 73.4 - 176 °F	DIN 11359-1/-2
Melting Point	220 °C	428 °F	DIN 53765
Deflection Temperature at 0.46 MPa (66 psi)	210 °C	410 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	165 °C	329 °F	ISO 75-1/-2
Flammability, UL94	V-2 @Thickness >=0.710 mm	V-2 @Thickness >=0.0280 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+14 ohm-cm	1.00e+14 ohm-cm	IEC 60093
Comparative Tracking Index	525 V	525 V	Test solution A; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	250 - 275 °C	482 - 527 °F	Injection-molding/Extrusion
Mold Temperature	80.0 - 90.0 °C	176 - 194 °F	Injection-molding

Descriptive Properties	Value	Comments
Commercial Status	Europe

Users viewing this material also viewed the following: