• HOME
• POLYMER SEARCH
• Thermoplastic
• Polycarbonate (PC)
• Polycarbonate, 30% Glass Filled
• Eurotec® Tecotek® PC43 GR30 BK002 PC, 30% glass fiber reinforced, black

Mechanical Properties	Metric	English	Comments
Density	1.41 g/cc	0.0509 lb/in³	ISO 1183
Moisture Absorption	0.200 % <br>@Temperature 23.0 °C	0.200 % <br>@Temperature 73.4 °F	50% RH; ISO 960
Linear Mold Shrinkage, Flow	0.0040 cm/cm	0.0040 in/in	Eurotec
Linear Mold Shrinkage, Transverse	0.0040 cm/cm	0.0040 in/in	Eurotec

Thermal Properties	Metric	English	Comments
Tensile Strength at Break	130 MPa	18900 psi	ISO 527
Elongation at Break	2.0 %	2.0 %	ISO 527
Tensile Modulus	9.00 GPa	1310 ksi	ISO 527
Izod Impact, Notched (ISO)	12.0 kJ/m² <br>@Temperature -30.0 °C	5.71 ft-lb/in² <br>@Temperature -22.0 °F	ISO 180/1A
	15.0 kJ/m² <br>@Temperature 23.0 °C	7.14 ft-lb/in² <br>@Temperature 73.4 °F	ISO 180/1A

Optical Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	145 °C	293 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	140 °C	284 °F	ISO 75
Vicat Softening Point	145 °C <br>@Load 5.10 kg	293 °F <br>@Load 11.2 lb	ISO 306
Glow Wire Test	850 °C <br>@Thickness 2.00 mm	1560 °F <br>@Thickness 0.0787 in	GWFI; IEC 60695
	875 °C <br>@Thickness 2.00 mm	1610 °F <br>@Thickness 0.0787 in	GWIT; IEC 60695

Electrical Properties	Metric	English	Comments
Processing Temperature	270 - 310 °C	518 °F
Feed Temperature	60.0 - 80.0 °C	140 °F	Throat
Mold Temperature	80.0 - 100 °C	176 °F
Drying Temperature	120 °C	248 °F
Dry Time	3.00 - 4.00 hour	3.00 hour
Moisture Content	<= 0.10 %	<= 0.10 %	ISO 960
Hold Pressure	60.0 - 120 MPa	8700 psi

Compliance Properties	Metric	English	Comments
Back Pressure	Low
Injection Speed	Medium - Fast

Chemical Resistance Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	IEC 60093
Surface Resistance	1.00e+15 ohm	1.00e+15 ohm	IEC 60093
Comparative Tracking Index	175 V	175 V	Solution A; IEC 60112