POLYMER SEARCH

Styrolution Styrolux 3G55 SBC

Category	Polymer , Thermoplastic , Styrene-Butadiene , Styrene-Butadiene Copolymer, SBC
Manufacturer	Styrolution
Trade Name	Styrolux
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution Styrolux 3G55 SBC.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Styrolux 3G55 is a thermoplastic styrene-butadiene block copolymer which is suitable for film and sheet extrusion, and thermoforming. It offers and outstanding combination of crystal clarity and excellent toughness. It was designed to provide greater GPPS acceptance than conventional grades.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS.

Physical Properties	Metric	English	Comments
Density	1.01 g/cc	0.0365 lb/inÂ³	ISO 1183
Water Absorption	0.070 %	0.070 %	ISO 62
Moisture Absorption at Equilibrium	0.070 %	0.070 %	23Â°C/50% R.H.; ISO 62
Moisture Vapor Transmission	1.70 cc-mm/mÂ²-24hr-atm	4.32 cc-mil/100 inÂ²-24hr-atm	100% RH; ASTM Test
Oxygen Transmission Rate	500 cc/mÂ²/day	32.2 cc/100 inÂ²/day	0% RH; ASTM Test
Linear Mold Shrinkage	0.0065 cm/cm	0.0065 in/in	ASTM Data; MD
Melt Flow	15 g/10 min @Load 5.00 kg, Temperature 200 Â°C	15 g/10 min @Load 11.0 lb, Temperature 392 Â°F	ASTM Test
	16 g/10 min @Load 5.00 kg, Temperature 200 Â°C	16 g/10 min @Load 11.0 lb, Temperature 392 Â°F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	16.0 MPa	2320 psi	2 in/min; ASTM Test
	20.0 MPa	2900 psi	50mm/min; ISO 527
Elongation at Break	>= 50 %	>= 50 %	50mm/min, Nominal strain; ISO 527
	>= 300 %	>= 300 %	2 in/min; ASTM Test
	300 %	300 %	0.2 in/min; ASTM Test
Elongation at Yield	2.0 %	2.0 %	50mm/min; ISO 527
Tensile Modulus	0.900 GPa	131 ksi	1mm/min; ISO 527
	1.17 GPa	170 ksi	2 in/min; ASTM Test
Flexural Strength	17.0 MPa	2470 psi	ASTM Test
	18.0 MPa	2610 psi	ISO Data
Flexural Modulus	0.760 GPa	110 ksi	ASTM Test
	0.900 GPa	131 ksi	ISO Data
Secant Modulus, MD	0.835 GPa	121 ksi	ASTM Test
Secant Modulus, TD	0.685 GPa	99.4 ksi	ASTM Test
Izod Impact, Notched	NB @Thickness 3.17 mm	NB @Thickness 0.125 in	ASTM Test
Izod Impact, Notched (ISO)	5.00 kJ/mÂ²	2.38 ft-lb/inÂ²	ISO Test
Charpy Impact Unnotched	NB	NB	ISO 179
	8.70 J/cmÂ² @Temperature -30.0 Â°C	41.4 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179
Charpy Impact, Notched	8.50 J/cmÂ²	40.5 ft-lb/inÂ²	ISO 179
	0.200 J/cmÂ² @Temperature -30.0 Â°C	0.952 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179
Dart Drop, Total Energy	21.0 J	15.5 ft-lb	ASTM Test
Impact Test	10.0 J	7.38 ft-lb	Instrumented Dart Impact (Energy at Peak Force); ASTM Test
Elmendorf Tear Strength MD	830 g	830 g	ASTM Data
Elmendorf Tear Strength TD	339 g	339 g	ASTM Data
Film Tensile Strength at Break, MD	310 MPa	45000 psi	ASTM Data
Film Tensile Strength at Break, TD	350 MPa	50800 psi	ASTM Data

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	75.0 Âµm/m-Â°C	41.7 Âµin/in-Â°F	ISO 11359
CTE, linear, Transverse to Flow	72.0 Âµm/m-Â°C	40.0 Âµin/in-Â°F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	62.0 Â°C	144 Â°F	ISO 75
	67.0 Â°C	153 Â°F	ASTM Test
Deflection Temperature at 1.8 MPa (264 psi)	46.0 Â°C	115 Â°F	ASTM Test
	51.0 Â°C	124 Â°F	ISO 75
Vicat Softening Point	35.0 Â°C	95.0 Â°F	(50 Â°C/h / 50N) - B/50; ISO 306
	72.0 Â°C	162 Â°F	Rate "B" Loading 1 (120 degC/h 10N); ASTM Test
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in
	HB @Thickness 3.20 mm	HB @Thickness 0.126 in

Optical Properties	Metric	English	Comments
Refractive Index	1.57	1.57	ASTM Test
Haze	1.6 % @Thickness 3.20 mm	1.6 % @Thickness 0.126 in	ASTM Test
Transmission, Visible	90 %	90 %

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm	IEC 60093
Dielectric Constant	2.5 @Frequency 1e+9 Hz	2.5 @Frequency 1e+9 Hz	ASTM Data
	2.5 @Frequency 1.00e+6 Hz	2.5 @Frequency 1.00e+6 Hz	ASTM Data
	2.5 @Frequency 100 Hz	2.5 @Frequency 100 Hz	IEC 60250
	2.5 @Frequency 1.00e+6 Hz	2.5 @Frequency 1.00e+6 Hz	IEC 60250
Dielectric Strength	80.0 kV/mm	2030 kV/in	IEC 60243-1
Dissipation Factor	0.00030 @Frequency 1e+9 Hz	0.00030 @Frequency 1e+9 Hz	ASTM Data
	0.00030 @Frequency 100 Hz	0.00030 @Frequency 100 Hz	IEC 60250
	0.00080 @Frequency 1.00e+6 Hz	0.00080 @Frequency 1.00e+6 Hz	ASTM Data
	0.00080 @Frequency 1.00e+6 Hz	0.00080 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	190 - 230 Â°C	374 - 446 Â°F	Extrusion
	180 - 250 Â°C	356 - 482 Â°F	Injection Molding
	230 Â°C	446 Â°F	Injection molding
Mold Temperature	30.0 - 50.0 Â°C	86.0 - 122 Â°F	Injection Molding
Injection Velocity	50.0 mm/sec	1.97 in/sec	Injection molding

Descriptive Properties	Value	Comments
Color	Clear
Commercial Status	Active America
FDA	Yes
Form	Yes
Impact Modified	Yes
NSF Std. 51	No
NSF Std. 61	No
Primary Processing Technique	Extrusion
Processing	Blow Molding
	Film Extrusion
	Injection Molding
	Other Extrusion
	Sheet Extrusion
UL.UL-C	No

Users viewing this material also viewed the following: