DuPont Performance Polymers Zytel® 70G30HSL NC010 Nylon 66 (Unverified Data**)

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled
Manufacturer	DuPont Performance Polymers
Trade Name	Zytel®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Zytel® 70G30HSL NC010 Nylon 66 (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

30% Glass Reinforced Heat Stabilized Polyamide 66 Zytel 70G30HSL NC010 is a 30% glass fiber reinforced heat stabilized polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.37 g/cc	0.0495 lb/in³	DAM; ISO 1183
Water Absorption	6.0 % @Thickness 2.00 mm	6.0 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Moisture Absorption	1.90 % @Thickness 2.00 mm	1.90 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Viscosity	46970 cP @Shear Rate 5000 1/s, Temperature 305 °C	46970 cP @Shear Rate 5000 1/s, Temperature 581 °F	ISO 11403-1 -2
	58620 cP @Shear Rate 5000 1/s, Temperature 295 °C	58620 cP @Shear Rate 5000 1/s, Temperature 563 °F	ISO 11403-1 -2
	74567 cP @Shear Rate 5000 1/s, Temperature 285 °C	74567 cP @Shear Rate 5000 1/s, Temperature 545 °F	ISO 11403-1 -2
	119700 cP @Shear Rate 500 1/s, Temperature 305 °C	119700 cP @Shear Rate 500 1/s, Temperature 581 °F	ISO 11403-1 -2
	154240 cP @Shear Rate 500 1/s, Temperature 295 °C	154240 cP @Shear Rate 500 1/s, Temperature 563 °F	ISO 11403-1 -2
	201130 cP @Shear Rate 500 1/s, Temperature 285 °C	201130 cP @Shear Rate 500 1/s, Temperature 545 °F	ISO 11403-1 -2
Linear Mold Shrinkage, Flow	0.0030 cm/cm	0.0030 in/in	DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.011 cm/cm	0.011 in/in	DAM; ISO 294-4 2577

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	88	88	50%RH; ISO 2039-2
	104	104	DAM; ISO 2039-2
Hardness, Rockwell R	117	117	50%RH; ISO 2039-2
	124	124	DAM; ISO 2039-2
Tensile Strength at Break	130 MPa	18900 psi	50%RH; ISO 527-1/-2
	200 MPa	29000 psi	DAM; ISO 527-1/-2
Elongation at Break	3.4 %	3.4 %	DAM; ISO 527-1/-2
	5.0 %	5.0 %	50%RH; ISO 527-1/-2
Tensile Modulus	7.00 GPa	1020 ksi	50%RH; ISO 527-1/-2
	10.0 GPa	1450 ksi	DAM; ISO 527-1/-2
Shear Modulus	0.6452 GPa @Temperature 150 °C	93.58 ksi @Temperature 302 °F	DAM; Dynamic; ISO 11403-1 -2
	0.714 GPa @Temperature 110 °C	104 ksi @Temperature 230 °F	DAM; Dynamic; ISO 11403-1 -2
	1.2377 GPa @Temperature 60.0 °C	179.52 ksi @Temperature 140 °F	DAM; Dynamic; ISO 11403-1 -2
	1.8948 GPa @Temperature 10.0 °C	274.82 ksi @Temperature 50.0 °F	DAM; Dynamic; ISO 11403-1 -2
	1.9612 GPa @Temperature -20.0 °C	284.45 ksi @Temperature -4.00 °F	DAM; Dynamic; ISO 11403-1 -2
	2.0275 GPa @Temperature -50.0 °C	294.07 ksi @Temperature -58.0 °F	DAM; Dynamic; ISO 11403-1 -2
Izod Impact, Notched (ISO)	13.0 kJ/m²	6.19 ft-lb/in²	DAM; ISO 180/1A
	17.0 kJ/m²	8.09 ft-lb/in²	50%RH; ISO 180/1A
	10.0 kJ/m² @Temperature -30.0 °C	4.76 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 180/1A
	12.0 kJ/m² @Temperature -30.0 °C	5.71 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 180/1A
Charpy Impact Unnotched	8.20 J/cm²	39.0 ft-lb/in²	DAM; ISO 179/1eU
	9.30 J/cm²	44.3 ft-lb/in²	50%RH; ISO 179/1eU
	7.00 J/cm² @Temperature -30.0 °C	33.3 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eU
	7.30 J/cm² @Temperature -30.0 °C	34.7 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 179/1eU
Charpy Impact, Notched	1.20 J/cm²	5.71 ft-lb/in²	DAM; ISO 179/1eA
	1.60 J/cm²	7.61 ft-lb/in²	50%RH; ISO 179/1eA
	1.00 J/cm² @Temperature -30.0 °C	4.76 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eA
	1.00 J/cm² @Temperature -30.0 °C	4.76 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 179/1eA
Tensile Creep Modulus, 1 hour	6800 MPa @Time 3600 sec	986000 psi @Time 1.00 hour	50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours	5100 MPa @Time 3.60e+6 sec	740000 psi @Time 1000 hour	50%RH; ISO 899-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	22.0 µm/m-°C	12.2 µin/in-°F	DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow	107 µm/m-°C	59.4 µin/in-°F	DAM; ISO 11359-1/-2
Melting Point	263 °C	505 °F	DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	261 °C	502 °F	DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	248 °C	478 °F	DAM; ISO 75-1/-2
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; IEC 60695-11-10
	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in	DAM; IEC 60695-11-10
Flame Spread	13 mm/min @Thickness 1.00 mm	0.51 in/min @Thickness 0.0394 in	ISO 3795 (FMVSS 302)

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+11 ohm-cm	1.00e+11 ohm-cm	50%RH; IEC 60093
	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	DAM; IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	50%RH; IEC 60093
	1.00e+15 ohm	1.00e+15 ohm	DAM; ASTM D257
Dielectric Constant	4.1 @Frequency 1.00e+6 Hz	4.1 @Frequency 1.00e+6 Hz	DAM; IEC 60250
	4.4 @Frequency 100 Hz	4.4 @Frequency 100 Hz	DAM; IEC 60250
	4.6 @Frequency 1.00e+6 Hz	4.6 @Frequency 1.00e+6 Hz	50%RH; IEC 60250
	10.8 @Frequency 100 Hz	10.8 @Frequency 100 Hz	50%RH; IEC 60250
Dielectric Strength	32.0 kV/mm	813 kV/in	50%RH; IEC 60243-1
	38.0 kV/mm	965 kV/in	DAM; IEC 60243-1
Dissipation Factor	0.0070 @Frequency 100 Hz	0.0070 @Frequency 100 Hz	DAM; IEC 60250
	0.015 @Frequency 1.00e+6 Hz	0.015 @Frequency 1.00e+6 Hz	DAM; IEC 60250
	0.065 @Frequency 1.00e+6 Hz	0.065 @Frequency 1.00e+6 Hz	50%RH; IEC 60250
	0.46 @Frequency 100 Hz	0.46 @Frequency 100 Hz	50%RH; IEC 60250
Comparative Tracking Index	400 V	400 V	DAM; IEC 60112

Descriptive Properties	Value	Comments
Part Marking Code	>PA66-GF30<	ISO 11469
Processing	Injection Moulding
Regional Availability	Europe
	Near East/Africa
Resin Identification	PA66-GF30
Special Characteristics	Heat stabilised or stable to heat
UL recognition	UL	DAM

Users viewing this material also viewed the following: