Solvay Specialty Polymers AvaSpire® AV-651 Polyaryletherketone (PAEK) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyketone
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers AvaSpire® AV-651 Polyaryletherketone (PAEK) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

AvaSpire AV-651 is an unreinforced polyaryletherketone (PAEK) that offers more ductility and impact strength than PEEK, with higher chemical and environmental stress cracking resistance than AvaSpire AV-650. It has been specifically formulated for applications requiring a balance of chemical resistance and mechanical strength along with good part aesthetics, bridging the performance gaps within the ultra polymers space. These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses. AvaSpire AV-651 can be easily processed by typical injection molding and extrusion methods using conventional processing equipment. - Natural: AvaSpire AV-651 NT - Beige: AvaSpire AV-651 BG 15Information provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Specific Gravity	1.29 g/cc	1.29 g/cc	ASTM D792
Water Absorption	0.20 % @Time 86400 sec	0.20 % @Time 24.0 hour	ASTM D570
Viscosity	240000 cP @Shear Rate 1000 1/s, Temperature 400 °C	240000 cP @Shear Rate 1000 1/s, Temperature 752 °F	Melt; ASTM D3835
Linear Mold Shrinkage, Flow	0.0070 - 0.0090 cm/cm @Thickness 3.18 mm	0.0070 - 0.0090 in/in @Thickness 0.125 in	5" x 0.5" x 0.125"; ASTM D955
Linear Mold Shrinkage, Transverse	0.010 - 0.012 cm/cm @Thickness 3.18 mm	0.010 - 0.012 in/in @Thickness 0.125 in	5" x 0.5" x 0.125"; ASTM D955
Melt Flow	25 g/10 min @Load 2.16 kg, Temperature 400 °C	25 g/10 min @Load 4.76 lb, Temperature 752 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	94	94	M-Scale; ASTM D785
Tensile Strength	87.0 MPa	12600 psi	50 mm/min; ASTM D638
Tensile Strength, Yield	89.0 MPa	12900 psi	ISO 527-2/1A/50
Elongation at Break	>= 40 %	>= 40 %	50 mm/min; ASTM D638
	>= 40 %	>= 40 %	ISO 527-2/1A/50
Elongation at Yield	5.7 %	5.7 %	ISO 527-2/1A/50
	6.2 %	6.2 %	50 mm/min; ASTM D638
Tensile Modulus	3.00 GPa	435 ksi	50 mm/min; ASTM D638
	3.20 GPa	464 ksi	ISO 527-2/1A/1
Flexural Strength	124 MPa	18000 psi	ASTM D790
	127 MPa	18400 psi	ISO 178
Flexural Modulus	3.10 GPa	450 ksi	ASTM D790
	3.20 GPa	464 ksi	ISO 178
Compressive Strength	112 MPa	16200 psi	ASTM D695
Shear Strength	78.0 MPa	11300 psi	ASTM D732
Izod Impact, Notched	0.690 J/cm	1.29 ft-lb/in	ASTM D256
	NB	NB	ASTM D256
Izod Impact, Notched (ISO)	6.60 kJ/m²	3.14 ft-lb/in²	ISO 180
Izod Impact, Unnotched (ISO)	NB	NB	ISO 180

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	47.0 µm/m-°C @Temperature -50.0 - 50.0 °C	26.1 µin/in-°F @Temperature -58.0 - 122 °F	TMA; ASTM E831
Specific Heat Capacity	1.31 J/g-°C @Temperature 50.0 °C	0.313 BTU/lb-°F @Temperature 122 °F	DSC
	1.82 J/g-°C @Temperature 200 °C	0.435 BTU/lb-°F @Temperature 392 °F	DSC
Thermal Conductivity	0.240 W/m-K	1.67 BTU-in/hr-ft²-°F	ASTM E1530
Melting Point	345 °C	653 °F	Peak; ASTM D3418
Deflection Temperature at 1.8 MPa (264 psi)	190 °C @Thickness 3.20 mm	374 °F @Thickness 0.126 in	Annealed; 2 hours at 200°C; ASTM D648
Glass Transition Temp, Tg	158 °C	316 °F	ASTM D3418
Flammability, UL94	V-0 @Thickness 0.800 mm	V-0 @Thickness 0.0315 in	UL 94
	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in	UL 94

Electrical Properties	Metric	English	Comments
Volume Resistivity	5.00e+17 ohm-cm	5.00e+17 ohm-cm	ASTM D257
Surface Resistance	>= 1.90e+17 ohm	>= 1.90e+17 ohm	ASTM D257
Dielectric Constant	3.1 @Frequency 1.00e+6 Hz	3.1 @Frequency 1.00e+6 Hz	ASTM D150
	3.1 @Frequency 60.0 Hz	3.1 @Frequency 60.0 Hz	ASTM D150
	3.12 @Frequency 1000 Hz	3.12 @Frequency 1000 Hz	ASTM D150
Dielectric Strength	16.0 kV/mm @Thickness 3.00 mm	406 kV/in @Thickness 0.118 in	ASTM D149
Dissipation Factor	0.0010 @Frequency 1000 Hz	0.0010 @Frequency 1000 Hz	ASTM D150
	0.0010 @Frequency 60.0 Hz	0.0010 @Frequency 60.0 Hz	ASTM D150
	0.0040 @Frequency 1.00e+6 Hz	0.0040 @Frequency 1.00e+6 Hz	ASTM D150

Processing Properties	Metric	English
Rear Barrel Temperature	355 °C	671 °F
Middle Barrel Temperature	365 °C	689 °F
Front Barrel Temperature	370 °C	698 °F
Nozzle Temperature	375 °C	707 °F
Melt Temperature	365 - 390 °C	689 - 734 °F
Mold Temperature	150 - 180 °C	302 - 356 °F
Drying Temperature	150 °C	302 °F
Dry Time	4.00 hour	4.00 hour

Descriptive Properties	Value	Comments
Agency Ratings	ISO 10993
	ISO 10993-Part 1
Appearance	Beige
	Natural Color
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Autoclave Sterilizable
	Biocompatible
	Ductile
	E-beam Sterilizable
	Ethylene Oxide Sterilizable
	Fatigue Resistant
	Flame Retardant
	Good Chemical Resistance
	Good Dimensional Stability
	Good Impact Resistance
	Good Sterilizability
	Heat Sterilizable
	High Heat Resistance
	Radiation (Gamma) Resistant
	Radiation Sterilizable
	Radiotranslucent
	Steam Resistant
	Steam Sterilizable
Forms	Pellets
Generic	PAEK
Injection Rate	Fast
Processing Method	Extrusion Blow Molding
	Fiber (Spinning) Extrusion
	Film Extrusion
	Injection Blow Molding
	Injection Molding
	Machining
	Profile Extrusion
	Thermoforming
	Wire & Cable Extrusion
RoHS Compliance	RoHS Compliant
Screw Compression Ratio	2.0:1.0 to 3.0:1.0
Uses	Aerospace Applications
	Aircraft Applications
	Bearings
	Dental Applications
	Film
	Hospital Goods
	Industrial Applications
	Medical Appliances
	Medical/Healthcare Applications
	Oil/Gas Applications
	Pump Parts
	Seals
	Surgical Instruments

Users viewing this material also viewed the following: