Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Tensile Strength, Ultimate = 3190 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate 22.0 MPa
3190 psi
ISO 527-1
Polikim ULPOLEN® 1000 UHMWPE, Flame Retardant
For those producing flammable materials and in the mining industry, explosion and fire are major dangers. It is of vital importance that in conveyor belts and bunkers, lining material is flame retar..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
ISO 527-1
Polikim ULPOLEN® 1000 UHMWPE, UV, Antistatic
In tough operating conditions and under direct sunlight, standard Ulpolen® 1000 shows signs of wear and abrasion within a period shorter than a year. It accumulates static electric during daily use..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
ISO 527
Premix Thermoplastics PRE-ELEC® PS 1328
PRE-ELEC PS 1328 is a conductive thermoplastic compound based on polystyrene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC ..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
ASTM Data
Americas Styrenics Styron® 484C High Impact Polystyrene  (discontinued **)
STYRON® 484C high impact polystyrene resin, is typically used in refrigeration applications, appliances, containers, lids, furniture and profiles. It offers excellent low temperature toughness, exc..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
500 mm/min (20 in./min.); ASTM D638, Type IV Specimen
Eastman M3016-P Polyethylene  (discontinued **)
M3016-P is suggested for applications such as spiral-wound can linings, release paper, and photographic paper. M3016-P Has been found to exhibit good barrier properties, temperature resistance, and..
Tensile Strength, Ultimate 22.0 - 27.6 MPa
3190 - 4000 psi
Average value: 25.6 MPa Grade Count:8
Overview of materials for Polybutene
This property data is a summary of similar materials in the MatWeb database for the category "Polybutene". Each property range of values reported is minimum and maximum values of appropriate MatWeb ..
Tensile Strength, Ultimate 22.0 - 39.0 MPa
3190 - 5660 psi
Average value: 31.6 MPa Grade Count:18
Overview of materials for Polyperfluoroalkoxyethylene (PFA), Molded/Extruded
This property data is a summary of similar materials in the MatWeb database for the category "Polyperfluoroalkoxyethylene, Molded/Extruded". Each property range of values reported is minimum and max..
Tensile Strength, Ultimate 22.0 MPa

@Thickness 2.00 mm
3190 psi

@Thickness 0.0787 in
ASTM D4894
3M Dyneon™ TF 4220 PTFE 2% Cond. Pigm. Filled  (discontinued **)
Applications include antistat linings, seals, gaskets, moldings.Data provided by Dyneon.
Tensile Strength, Ultimate 22.0 MPa

@Temperature 90.0 °C
3190 psi

@Temperature 194 °F
ISO 527
LATI LATILUB 82-01M Nylon 12 Base, 1% Molybdenum Disulfide Self Lubricating Plastic  (discontinued **)
Description: Latilub self-lubricating plastic materials are more and more often designed to replace metals in applications such as gears, bushings, cams, slides, etc), for which, besides their intri..
Tensile Strength, Ultimate 22.0 - 80.0 MPa

@Temperature 80.0 - 120 °C
3190 - 11600 psi

@Temperature 176 - 248 °F
Average value: 50.9 MPa Grade Count:1
Overview of materials for Nylon 66, Glass/Mineral Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Glass/Mineral Filled". Each property range of values reported is minimum and maximum values of..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
at max load; ISO 527
A. Schulman FORMION™ FI 393 Ionomer
DescriptionFormion® FI 393 is a 10% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, low CLTE, and impact. Formion F1 393U is UV stabilized..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
at max load; ISO 527
A. Schulman FORMION™ FI 393 Ionomer
DescriptionFormion® FI 393 is a 10% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, low CLTE, and impact. Formion F1 393U is UV stabilized..
Tensile Strength, Ultimate 22.0 MPa

@Temperature 80.0 °C
3190 psi

@Temperature 176 °F
ASTM D638
Toyobo NB-5620S Nylon/Olefin Alloy, 15% Mineral Reinforced (Conditioned)
Features: 15% Mineral Reinforced, Light WeightInformation provided by Toyobo.
Tensile Strength, Ultimate 22.0 MPa
3190 psi
at max load; ISO 527
A. Schulman FORMION™ FI 393 Ionomer
DescriptionFormion® FI 393 is a 10% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, low CLTE, and impact. Formion F1 393U is UV stabilized..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
at max load; ISO 527
A. Schulman FORMION™ FI 393 Ionomer
DescriptionFormion® FI 393 is a 10% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, low CLTE, and impact. Formion F1 393U is UV stabilized..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
ISO 527-1
Chengdu Polyster FH4543 Thermoplastic Polyether-ester Elastomer (TPEE)
Blend of H4543 and self-made flame retardant material. Flame retardant, good balance of low and high temperature properties. Applications requiring flame retardancy, such as wires, cables and optica..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
ASTM D638/D412
Covestro Baydur® 660 IBS Polyurethane Structural Foam RIM, Density 40 pcf, MDI-based 2-Component Liquid System
0.25 in. thickness. IBS = Interactive Blowing System RIM = Reaction Injection MoldingInformation provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience ..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
ASTM D638/D412
Covestro Bayflex® 110-80 Polyurethane Elastomeric RIM, 15% Milled Glass Reinforced, MDI-based 2-Component Liquid System
0.125 in. thickness. RIM = Reaction Injection MoldingInformation provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and o..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
ISO 527
DSM Fibre Intermediates Nyrim® 2025 (Wollastocoat®), Conditioned
Conditioned at 23°C and 50% Relative Humidity.Nyrim is a Block Copolymer of Nylon 6 and an elastomer with exceptional properties in impact resistance, fatigue and abrasion resistance. Nyrim is proc..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
ASTM D638
DuPont™ Surlyn® PC350 Ionomer Resin, Highest Clarity, Sodium
Surlyn® PC350 luxury molding resin is a "select" grade of Surlyn® 8945, controlled to achieve the highest possible optical clarity in molded perfume jars and caps, while being optimized for proces..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
Vulcanizate, Press cured, TC95 +3min at 160°C
Dow Nordel® IP 4725P Heat Resistant Molding
FormulationNordel® IP 4725P
Tensile Strength, Ultimate 22.0 MPa
3190 psi
Die C (35 min / 145°C); ASTM D412
Dow SE SLR-4400 Solution polymerized Styrene Butadiene Rubber (S-SBR)
SE SLR-4400 is manufactured by anionic solution polymerization using lithium initiator. It is a product with medium styrene and high vinyl content. The product is partially Sn-coupled and non-stai..
Tensile Strength, Ultimate 22.0 MPa

@Thickness 1.14 - 1.52 mm,
Temperature 704 °C
3190 psi

@Thickness 0.0449 - 0.0598 in,
Temperature 1300 °F
AK Steel 409 Ferritic Stainless steel
AK Steel 409 Stainless Steels are especially useful for applications where oxidation or corrosion protection beyond the capacity of carbon steel and some coated steels is needed. Current applicatio..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
BASF Lucalen® A 2920 M Ethylene/Acrylate Copolymer
Used in the manufacture of economical composite films of Lucalen and PE-LD, and as a primer for aluminum steel composites.Data was collected by ISO methods and provided by BASF.
Tensile Strength, Ultimate 22.0 MPa
3190 psi
ASTM D638
Celanese Vandar® 8929 Thermoplastic Polyester Alloy
Unreinforced; high flexibilityInformation provided by Celanese Corporation.
Tensile Strength, Ultimate 22.0 MPa
3190 psi
BASF Lucalen® A 2910 M Ethylene/Acrylate Copolymer
For coating metals such as aluminum and steel, and as a primer for composites of metal or paper with Lupolen. Contains an antioxidant.Data was collected by ISO methods and provided by BASF.
Tensile Strength, Ultimate 22.0 MPa
3190 psi
DIN 53455
Ineos Nova S-3201 Medium Impact Compact Polystyrene  (discontinued **)
Extremely easy flowing medium impact polystyrene, designed for extreme short cycle times for injection molding of household, packaging and toys. The material is provided with external lubricant to ..
Tensile Strength, Ultimate 22.0 - 200 MPa
3190 - 29000 psi
Average value: 62.0 MPa Grade Count:104
Overview of materials for Nylon 6, Impact Grade
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Impact Grade". Each property range of values reported is minimum and maximum values of appropri..
Tensile Strength, Ultimate 22.0 MPa
3190 psi
ASTM D638
Elastomer Engineering Elastamide 400 Elastomer Modified RIM Nylon 6
18% crystallinity. Information supplied by Elastomer Engineering.
Tensile Strength, Ultimate 22.0 - 115 MPa
3190 - 16700 psi
Average value: 60.9 MPa Grade Count:150
Overview of materials for Polypropylene with 20% Glass Fiber Filler
This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 20% Glass Fiber Filler". Specific grades with glass content between 15% and 24% are i..
Copyright © lookpolymers.com All Rights Reserved